flex plate - Competition Diesel.Com

gwhammy · 10-26-2020, 06:34 PM

Guy that helped me on my swap bought a 2010 with a 6.7 swapped but not complete. He's going to put a 12 valve in it. Will the flex plate and adapter work on the from the 6.7 to the 12 valve?

Poulina · 10-27-2020, 09:03 AM

most likely not, in some cases if the engine had a g56 on it from the factory it will bolt up. but otherwise you will need to do some modification to the lip of the crank where the flexplate locates itself

zstroken · 10-27-2020, 10:57 AM

I believe that one of the holes on the adapter does not line up.

turbom700 · 10-27-2020, 11:05 AM

2 holes are different, and the CR has an o-ring to seal the cam where the 12/24v has a cut out. I make and sell both, you can usally modify a CR plate to work with a 12/24v but not the other way around due to the o-ring groove. Are you keeping the factory 5r transmission

10-26-2020, 06:34 PM	#1
gwhammy Name: gwhammy Title: Too Much Time Status: Not Here Join Date: Sep 2006 Location: Missouri Member`s Gallery Posts: 2,201	flex plate Guy that helped me on my swap bought a 2010 with a 6.7 swapped but not complete. He's going to put a 12 valve in it. Will the flex plate and adapter work on the from the 6.7 to the 12 valve? __________________ 95,twd,rc,sb,351-ht60 twins,160modded, 09 f350 12 valve,

10-27-2020, 09:03 AM	#2
Poulina Name: Poulina Title: Too Much Time Status: Not Here Join Date: Dec 2015 Location: Norcal Member`s Gallery Posts: 795	most likely not, in some cases if the engine had a g56 on it from the factory it will bolt up. but otherwise you will need to do some modification to the lip of the crank where the flexplate locates itself __________________ 2008 QCLB 6.8 48re Suncoast PCS, DDP supermentals, forcedinductions 467/87, Hamilton 188/220, Carrillos, studded mains w/stock girdle

10-27-2020, 10:57 AM	#3
zstroken Name: zstroken Title: For $$$ your name here Status: Not Here Join Date: Sep 2006 Location: Western Michigan(by the lake) Member`s Gallery Posts: 23,151	I believe that one of the holes on the adapter does not line up. __________________ 2008 4x4 Megacab, 68RFE 97 Dodge gone.... 24V P-Pump Mafia member #1(retired) Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!

10-27-2020, 11:05 AM	#4
turbom700 Name: turbom700 Title: Too Much Time Status: Not Here Join Date: Jun 2007 Location: minneapolis mn Member`s Gallery Posts: 1,186	2 holes are different, and the CR has an o-ring to seal the cam where the 12/24v has a cut out. I make and sell both, you can usally modify a CR plate to work with a 12/24v but not the other way around due to the o-ring groove. Are you keeping the factory 5r transmission __________________ 2001 Ford F-350 CCSB The usal stuff 1997 s10 2wd 350sbc 4l80e 2000 vw gold tdi 1999 Sportsman DIESEL