FASS 125 @ 45psi
So, I sent my pump in off my 24v(95gph). FASS put a new motor on it and it is suppose to be a 125 @45psi. I think it was bumped to a 200 @ 55-60 psi because of my gauge reading. Anyway, everything has been fine until last night. I lost power to my pump. My 30amp fuse is good and I bought a new relay. I can not get my pump to come on. Mind you, the setup is only about 3-4 months old. Will electric motors on these pumps reverse polarity? I'm just trying to work things out before I pull it and send it back. Any help would be appreciated, especially if any of the FASS reps would chime in. I have dealt with Gene, until he was out sick and I believe Ashley called to get the exacts on the pump upgrade.
Thank you,
Jody C. Penney
__________________
97 Dodge ECLB, 4x4
Bench Flowed 180-pump/ 375cc, Mack plug, 4gsk,
#60 springs, FASS 125@55psi, Colt Big Stick , II 62/s475, SD Man ,ARP studs, Fluid Damper, 5x.014 CPP and SB 3250
|