Mega Cab parts/junk - Page 2 - Competition Diesel.Com

maxwedgehead · 02-10-2017, 11:42 AM

still have the clean and nice set of white 06-09 fenders?

Mark Nixon · 02-10-2017, 12:04 PM

Nope, sold the whole truck.
I do still have a pair, a Silver one and a Patriot blue one.

Mark.

Mark Nixon · 07-09-2017, 02:23 PM

Still have the following Mega Cab junk:

2008 bare 1 ton 4x4 frame, fire damage in the front of the frame, has the revised location short bed B&W turnover hitch in it, $300.

2008 bare Mega Cab, fire damage at the nose and front of the roof, $500.

2006 Mega Cab 2500 2wd rolling chassis, with loaded cab, fenders and front bumper, very clean, rust free Texas truck, decent interior, no bed, engine or transmission $3200.

I do have the engine from the above truck, it WAS rebuilt, with head studs and some other aftermarket pieces, spun a rod bearing, I'd toss it in with the roller for another $1500.

Mega Cab Dually bed, burgudy with black fenders, $550.

I also have a 4x4 quad cab 1 ton dually running gear, with a fairly decent 8 foot dually bed, that I was going to back half into another Mega Cab 4x4 frame I have to make a long bed Mega Cab frame, this rolling frame, with bed, is available for $1200.

Or make me an offer on the whole mess and come get it, so I don't have to move it to the new place.

Mark.

texsasdiesel · 07-09-2017, 07:11 PM

Guessing you wouldn't separate dually fenders from bed ?

Mark Nixon · 07-09-2017, 07:16 PM

Not wanting to, no.

Mark.

Mark Nixon · 07-16-2017, 01:08 PM

This is the more complete truck.
It's now missing the bed, rear bumper, transmission and both driver's side wheels have been swapped out.

Mark.

dummins · 08-01-2017, 06:17 AM

Mark do you have any 3rd gen longbox frames with good rails from the cab back?

Mark Nixon · 08-01-2017, 07:38 AM

Are you thinking of stretching a Mega to a long bed?
I don't have anything for spare long bed frames at the moment.

Mark.

dummins · 08-01-2017, 12:34 PM

Yes I'm toying with the idea. There's a blown up low mile one sitting in the weeds in the back that I want to play with.

Mark Nixon · 08-02-2017, 05:57 PM

I actually have most everything to do the conversion.
I have roller 4wd quad cab 3500 dually frame, with bed, an already bobbed Mega Cab 4wd front frame section and a couple of cabs, one of which is this loaded red one.

I even have a full automatic drive train.

I'd make someone a sweet deal on all of it.

Mark.

Blazin Dmax · 08-05-2017, 07:13 AM

I'm looking for a driver's side Rear door for an 06 megacab. Let me know if you have one with no damage that you will let go of. Thanks

ACCummins · 08-06-2017, 12:27 PM

what are you asking for the 2006 mega cab?

ACCummins · 08-27-2017, 09:28 PM

Do you have any rust free mega cab doors?

widieseltech · 08-28-2017, 10:25 PM

Mark do you have any long bed for 3rd gens? Preferably white?

Mark Nixon · 09-14-2017, 12:12 PM

Before I make scrap of it, I'll take $8000 for the whole project.
I am NOT parting it out.

If anyone is seriously interested, call 402-780-5127 and I'll give you the rundown on the whole project and parts included.

The basics are:

Mostly complete 2006 Mega Cab 2500 2WD roller, less bed, engine, trans and rear bumper. Includes 99% of the interior and all critical interior parts for 2WD AUTOMATIC.

2006 4x4 Quad Cab 3500 dually rolling frame, with axles, driveshafts and white dually bed. This was to be used for the rear axle and frame section and the 4x4 front end parts were to be used on the front frame section I have listed below.

An extra Red dually bed in very nice condition.

Stripped front frame stub from just behind the rear cab mounts forward, from a Mega Cab 4x4.

Mostly complete auto drivetrain, including a 48RE core, a 273D (electric shift) transfer case, a 5.9 or 6.7 (your choice) engine core, all wiring harnesses, ECM, TIPM, etc. from one truck (the Mega Cab roller above).

Also included is an OEM steel SRT hood (package deal only!), aftermarket headlights and quite a bit more.

Mark.

02-10-2017, 11:42 AM	#21
maxwedgehead Name: maxwedgehead Title: Too Much Time Status: Not Here Join Date: Nov 2010 Location: West Plains, MO Member`s Gallery Posts: 850	still have the clean and nice set of white 06-09 fenders? __________________ 15 Mega Cab Dually 03 RCSB 1500 12 valve 215 pump, built 47re, 5x18s, 4k gsk, sxe369, Fass 240, 7mm delivery valves, 11.71 08 RCSB 1500 06 CR built 48re, Compounds, 200% over, 12mm, Billet rod motor, etc.. 2009 CCSB 6.7L

02-10-2017, 12:04 PM	#22
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Nope, sold the whole truck. I do still have a pair, a Silver one and a Patriot blue one. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-09-2017, 02:23 PM	#23
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Still have the following Mega Cab junk: 2008 bare 1 ton 4x4 frame, fire damage in the front of the frame, has the revised location short bed B&W turnover hitch in it, $300. 2008 bare Mega Cab, fire damage at the nose and front of the roof, $500. 2006 Mega Cab 2500 2wd rolling chassis, with loaded cab, fenders and front bumper, very clean, rust free Texas truck, decent interior, no bed, engine or transmission $3200. I do have the engine from the above truck, it WAS rebuilt, with head studs and some other aftermarket pieces, spun a rod bearing, I'd toss it in with the roller for another $1500. Mega Cab Dually bed, burgudy with black fenders, $550. I also have a 4x4 quad cab 1 ton dually running gear, with a fairly decent 8 foot dually bed, that I was going to back half into another Mega Cab 4x4 frame I have to make a long bed Mega Cab frame, this rolling frame, with bed, is available for $1200. Or make me an offer on the whole mess and come get it, so I don't have to move it to the new place. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-09-2017, 07:11 PM	#24
texsasdiesel Name: texsasdiesel Title: Too Much Time Status: Not Here Join Date: Sep 2008 Location: Nicholasville, KY Member`s Gallery Posts: 524	Guessing you wouldn't separate dually fenders from bed ? __________________ 03 QC Dually Auto: Tow Rig/DD 02 Ram 2500: NV5600, 24V, P7100 85 Dodge Crew Cab: 12v, NV4500, NP205, sb dually

07-09-2017, 07:16 PM	#25
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Not wanting to, no. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-16-2017, 01:08 PM	#26
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	This is the more complete truck. It's now missing the bed, rear bumper, transmission and both driver's side wheels have been swapped out. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-01-2017, 06:17 AM	#27
dummins Name: dummins Title: Another moron Status: Here Join Date: Jan 2012 Location: Beaver Lake Member`s Gallery Posts: 262	Mark do you have any 3rd gen longbox frames with good rails from the cab back?

08-01-2017, 07:38 AM	#28
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Are you thinking of stretching a Mega to a long bed? I don't have anything for spare long bed frames at the moment. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-01-2017, 12:34 PM	#29
dummins Name: dummins Title: Another moron Status: Here Join Date: Jan 2012 Location: Beaver Lake Member`s Gallery Posts: 262	Yes I'm toying with the idea. There's a blown up low mile one sitting in the weeds in the back that I want to play with.

08-02-2017, 05:57 PM	#30
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	I actually have most everything to do the conversion. I have roller 4wd quad cab 3500 dually frame, with bed, an already bobbed Mega Cab 4wd front frame section and a couple of cabs, one of which is this loaded red one. I even have a full automatic drive train. I'd make someone a sweet deal on all of it. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-05-2017, 07:13 AM	#31
Blazin Dmax Name: Blazin Dmax Title: Green Behind the Ears Status: Not Here Join Date: Mar 2008 Member`s Gallery Posts: 44	I'm looking for a driver's side Rear door for an 06 megacab. Let me know if you have one with no damage that you will let go of. Thanks

08-06-2017, 12:27 PM	#32
ACCummins Name: ACCummins Title: Rookie Status: Not Here Join Date: Dec 2014 Location: Spring Lake, NC Member`s Gallery Posts: 18	what are you asking for the 2006 mega cab? __________________ Only two defining forces have ever offered to die for you: ...Jesus Christ and the American Service Members....One died for your soul; The other for your freedom.

08-27-2017, 09:28 PM	#33
ACCummins Name: ACCummins Title: Rookie Status: Not Here Join Date: Dec 2014 Location: Spring Lake, NC Member`s Gallery Posts: 18	Do you have any rust free mega cab doors? __________________ Only two defining forces have ever offered to die for you: ...Jesus Christ and the American Service Members....One died for your soul; The other for your freedom.

08-28-2017, 10:25 PM	#34
widieseltech Name: widieseltech Title: Green Behind the Ears Status: Not Here Join Date: Jan 2013 Member`s Gallery Posts: 90	Mark do you have any long bed for 3rd gens? Preferably white? __________________ 2012 Denali 2500 EFI, 5" MBRP, 10mm cp3 conversion, SDP Intake Piping. Pull Truck-2005 Dodge 2500, 12v motor, 3.0 smoothbore

09-14-2017, 12:12 PM	#35
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Before I make scrap of it, I'll take $8000 for the whole project. I am NOT parting it out. If anyone is seriously interested, call 402-780-5127 and I'll give you the rundown on the whole project and parts included. The basics are: Mostly complete 2006 Mega Cab 2500 2WD roller, less bed, engine, trans and rear bumper. Includes 99% of the interior and all critical interior parts for 2WD AUTOMATIC. 2006 4x4 Quad Cab 3500 dually rolling frame, with axles, driveshafts and white dually bed. This was to be used for the rear axle and frame section and the 4x4 front end parts were to be used on the front frame section I have listed below. An extra Red dually bed in very nice condition. Stripped front frame stub from just behind the rear cab mounts forward, from a Mega Cab 4x4. Mostly complete auto drivetrain, including a 48RE core, a 273D (electric shift) transfer case, a 5.9 or 6.7 (your choice) engine core, all wiring harnesses, ECM, TIPM, etc. from one truck (the Mega Cab roller above). Also included is an OEM steel SRT hood (package deal only!), aftermarket headlights and quite a bit more. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.