Anyone have input about sleeves in a 6.7 block - Competition Diesel.Com

1000orbust · 08-13-2015, 10:14 PM

If there's a link to a thread that's discusses it please post it. Also I'm wondering if there is much of a difference between standard bore and running 6 cummins salvage sleeves. What's about Darton sleeves? I called them up and they said they would take 3-4weeks lead time and cost 3x as much. Any input would be great. Thanks.

jlibert · 08-13-2015, 10:35 PM

Call precision sleeves or http://nolimitmfg.com/improve-your-valve-train/

I used a .125 sleeve and went 4.21 bore. It all depends on what you're trying to do with it.

08cumminssmoke · 08-13-2015, 10:41 PM

Quote:

Originally Posted by jlibert

Call precision sleeves or http://nolimitmfg.com/improve-your-valve-train/

I used a .125 sleeve and went 4.21 bore. It all depends on what you're trying to do with it.

X2

Talk with Eric at no limit. He can get you setup with whatever you need/want. Great guy to deal with and you can't beat his prices

Sent from my iPhone using Tapatalk

1000orbust · 08-13-2015, 11:02 PM

Quote:

Originally Posted by jlibert

Call precision sleeves or http://nolimitmfg.com/improve-your-valve-train/

I used a .125 sleeve and went 4.21 bore. It all depends on what you're trying to do with it.

Thank you, I'm looking to go north of 1khp so I'm trying to do all I can to strengthen the block so ill see what they recommend.

jlibert · 08-14-2015, 05:43 AM

Quote:

Originally Posted by 1000orbust

Thank you, I'm looking to go north of 1khp so I'm trying to do all I can to strengthen the block so ill see what they recommend.

Depending on how far above 1000 you're looking at, you may want to consider sleeving it down to something smaller than the 6.7 bore.

1000orbust · 08-14-2015, 02:15 PM

Does her typically not answer? I've called him at 730, 8:00, and now 12 pacific time and left a message the first time I called. Maybe he started an early weekend?

Cozze44 · 08-14-2015, 02:27 PM

Quote:

Originally Posted by 1000orbust

Does her typically not answer? I've called him at 730, 8:00, and now 12 pacific time and left a message the first time I called. Maybe he started an early weekend?

Every time I've left a message, he has called back. Eric is a great guy to work with.

*shortbusdriver* · 08-14-2015, 03:17 PM

Eric has a vendor booth set up at the Hillsboro Charity Tractor Pull today and tomorrow. Likely the only one at the shop is his machinist.

08cumminssmoke · 08-14-2015, 04:12 PM

Quote:

Originally Posted by 1000orbust

Does her typically not answer? I've called him at 730, 8:00, and now 12 pacific time and left a message the first time I called. Maybe he started an early weekend?

Send him an email or pm him on here (EricStaab). I'm sure he's just busy at the moment.

Sent from my iPhone using Tapatalk

1000orbust · 08-14-2015, 04:33 PM

Thanks guys

08-13-2015, 10:14 PM	#1
1000orbust Name: 1000orbust Title: Green Behind the Ears Status: Not Here Join Date: Jul 2015 Member`s Gallery Posts: 32	Anyone have input about sleeves in a 6.7 block If there's a link to a thread that's discusses it please post it. Also I'm wondering if there is much of a difference between standard bore and running 6 cummins salvage sleeves. What's about Darton sleeves? I called them up and they said they would take 3-4weeks lead time and cost 3x as much. Any input would be great. Thanks. __________________ 06 Dodge hybrid in the works

08-13-2015, 10:35 PM	#2
jlibert Name: jlibert Title: Too Much Time Status: Not Here Join Date: Jun 2007 Location: CA Member`s Gallery Posts: 3,454	Call precision sleeves or http://nolimitmfg.com/improve-your-valve-train/ I used a .125 sleeve and went 4.21 bore. It all depends on what you're trying to do with it. __________________ J.P. Libert https://instagram.com/jplibert/

08-14-2015, 02:15 PM	#6
1000orbust Name: 1000orbust Title: Green Behind the Ears Status: Not Here Join Date: Jul 2015 Member`s Gallery Posts: 32	Does her typically not answer? I've called him at 730, 8:00, and now 12 pacific time and left a message the first time I called. Maybe he started an early weekend? __________________ 06 Dodge hybrid in the works Last edited by 1000orbust; 08-14-2015 at 02:20 PM.

08-14-2015, 03:17 PM	#8
shortbusdriver Name: shortbusdriver Title: this guy Status: Not Here Join Date: May 2009 Location: Mayville, WI Member`s Gallery Posts: 2,318	Eric has a vendor booth set up at the Hillsboro Charity Tractor Pull today and tomorrow. Likely the only one at the shop is his machinist. __________________ Contagious Diesel http://contagiousdiesel.com/ https://www.facebook.com/Contagious-...7994165231032/

08-14-2015, 04:33 PM	#10
1000orbust Name: 1000orbust Title: Green Behind the Ears Status: Not Here Join Date: Jul 2015 Member`s Gallery Posts: 32	Thanks guys __________________ 06 Dodge hybrid in the works