99 FL60 mutt/conversion/repower project build

[malibu795]

Originally Posted by biggy238

Just thought I would offer, mine collects dust.

Sent from my XT1575 using Tapatalk

Thanks


New valair 14 DD should hold ~1500tq ish

What was in it

[jlbayes]

Electric pump. Ran one with an airdog on my ppump 24v. Figured out quickly it would not hold pressure like they said it would.

[malibu795]

Originally Posted by jlbayes

Electric pump. Ran one with an airdog on my ppump 24v. Figured out quickly it would not hold pressure like they said it would.

We'll find out

[malibu795]

Making progress

[Jesse M.]

I once saw a guy hang the clutch on the input shaft of the trans, mate the trans to the engine, then bolt up the clutch thru the inspection cover...I thought that was pretty clever, no need to wrestle the trans around trying to stab it.


Sent from my iPhone using Tapatalk

[malibu795]

Originally Posted by Jesse M.

I once saw a guy hang the clutch on the input shaft of the trans, mate the trans to the engine, then bolt up the clutch thru the inspection cover...I thought that was pretty clever, no need to wrestle the trans around trying to stab it.


Sent from my iPhone using Tapatalk

Definetly be something to do while IN the truck, not sitting on the ground.. lol

Called around for shocks on the rear... Seams the 15k low profile air ride system has a one off shock.. $60.00 the frieghtliner..and naturally not stocked..

Getting super then working on getting trans mated up..
Get various crossmembers bolted back in, new brake lines, batter cables,

Mocked ride height, axle center line is ~16.5-17" off the ground (33-34" tall tire), bags designed for 9.5-10.25" set at ~9.75", ride height puts frame top right around 32-33" vs the ~42" it was when I started..

[biggy238]

Originally Posted by Jesse M.

I once saw a guy hang the clutch on the input shaft of the trans, mate the trans to the engine, then bolt up the clutch thru the inspection cover...I thought that was pretty clever, no need to wrestle the trans around trying to stab it.


Sent from my iPhone using Tapatalk

The only draw back to this is the spacers on the intermediate plate will not shift if you don't tighten the clutch evenly and incrementally and Eaton told us they will void the warranty if they don't see marks from the spacers striking the flywheel on a clutch claim. We do it all the time, and it's nearly impossible to do a nodal mount transmission without loading the clutch.

Sent from my XT1575 using Tapatalk

[malibu795]

would the ***** about hanging the intermediate plate by a bolt like I did?

[biggy238]

Originally Posted by malibu795

would the ***** about hanging the intermediate plate by a bolt like I did?

For warranty, anything can be *****ed about.


Sent from my XT1575 using Tapatalk

[malibu795]

true

[malibu795]

Parts and candy, at least it's cool enough not to melt the chocolate

[malibu795]

Is There a more Common version of an integrated ride height/dump combo which is 150-175.00 pending vender
90555106 - Height Control Valve - Replaces 90554271 - Haldex product

I have the non dump combo
90555105 - Height Control Valve - Replaces 90554241 - Haldex product

[malibu795]

Waiting in spacers, 1/2" will get it off probably run 1" and a shield in between exhaust and compressor housing
Still got alot of 5% stuff needing done..

[malibu795]

Another piece of the puzzle...need new bolts...Only thing I don't like... It's air applied vs air released ��
Not sure if it can be swapped around or not...

[JWhite]

Does it have a spot to bolt it together in case of a failure?

[malibu795]

Found it.. you can see one of the holes.. looks like who ever rebuilt it clocked it wrong.. and locking bolt holes should be in the cut out area.. fan bolt is 5/16 lock bolt is 1/4"

[malibu795]

]I've thought about version of these for my 8.3 Cummins
https://watermanracing.com/product-category/pumps/
http://www.magnafuel.com/outlaw.html

[JWhite]

Stock pump won't be enough?

[malibu795]

I've ditched the stock mechanical

[malibu795]

Seams I might be able to run 255/70/22.5(37") might stay with 245/70/19.5
Been looking up open shoulder drive tire for each.. had DC RLB1 in the 225/70/19.5 on my LMM with good results..
19.5
Bridgestone M729F for 19.5
Double coin
Dayton (Bridgestone)
Roadmaster
Hankook
Contenintal
22.5
Contenintal HDR
Double coin

Course the big name Goodyear michlien carry all them at $500.0/ or.more a tire
Top gear cruise
255/70/22.5 (37") is 1550@70
245/70/19.5 (33") is 1750@70

I might be able to make the 2" veritcal difference between the tires.. IDK yet