so it starts up fine then starts running real rough no power check engine light comes on and like someone flipped a switch it smoothed out with no issues at all full power
cel goes off so I look a little farther one of the valve cover plugs had been replaced and a new pigtail butt connected on so I took them off and soldered them thinking that was the issue and same thing will run real rough
cel no power shut it off and start it again it's fine til all of the sudden i do nothing to trigger it it happens again, the fuel in the bowl is clean so is the oil and it's full of oil and help quickly is much appreciated also when it runs rough I unplugged the
icp and nothing changes