NV5600 SB Triple Questions - Competition Diesel.Com

Smoke'm · 03-10-2018, 09:59 AM

Hey guys I'm pretty new to the sled pulling world and I have a few clutch questions.

I have an 02 Dodge 2500 6 speed. I found a good deal on Southbend triple disc clutch that was behind a NV4500. He ran a bell housing spacer and a 1 3/8 input. If I'm not mistaken my NV5600 is stock with a 1 3/8 shaft but I'm wondering if I would have to run a spacer or is the NV5600 bell housing already deep enough.

Thanks in advance,
Paul

K204DR · 03-10-2018, 07:15 PM

bellhousing spacer, or spacer for the starter? the 5600 clutches run a starter spacer and the nv4500 doesn't. running that clutch with an nv4500 requires the starter spacer unless the flywheel was setup special for the nv4500.

Smoke'm · 03-10-2018, 10:33 PM

It's a spacer for the whole bellhousing. Looks to be about 3/4 of an inch in thickness.

khales · 03-19-2018, 11:13 AM

South bend requires the spacer and a longer input shaft which I’m not sure if you can get for the 5600

Sent from my iPhone using Tapatalk

03-10-2018, 09:59 AM	#1
Smoke'm Name: Smoke'm Title: Rookie Status: Not Here Join Date: Aug 2017 Member`s Gallery Posts: 26	NV5600 SB Triple Questions Hey guys I'm pretty new to the sled pulling world and I have a few clutch questions. I have an 02 Dodge 2500 6 speed. I found a good deal on Southbend triple disc clutch that was behind a NV4500. He ran a bell housing spacer and a 1 3/8 input. If I'm not mistaken my NV5600 is stock with a 1 3/8 shaft but I'm wondering if I would have to run a spacer or is the NV5600 bell housing already deep enough. Thanks in advance, Paul

03-10-2018, 07:15 PM	#2
K204DR Name: K204DR Title: I'm the Driver Status: Not Here Join Date: Jun 2008 Location: TN Member`s Gallery Posts: 971	bellhousing spacer, or spacer for the starter? the 5600 clutches run a starter spacer and the nv4500 doesn't. running that clutch with an nv4500 requires the starter spacer unless the flywheel was setup special for the nv4500. __________________ 88 Chevy crewcab 6bt nv4500 valair clutch

03-19-2018, 11:13 AM	#4
khales Name: khales Title: Diesel Enthusiast Status: Not Here Join Date: Nov 2010 Location: utah Member`s Gallery Posts: 172	South bend requires the spacer and a longer input shaft which I’m not sure if you can get for the 5600 Sent from my iPhone using Tapatalk __________________ 94 sclb 2500 prostock/ss 6.7 12v puller Gonebroke 07.5 sclb 6.7 gt55 175%injectors dual cp3 fun truck 07.5 mcsb 6.7 deleted 391k miles wife’s truck 14 cclb 6.7 68rfe 2500 dd tow rig

03-10-2018, 10:33 PM	#3
Smoke'm Name: Smoke'm Title: Rookie Status: Not Here Join Date: Aug 2017 Member`s Gallery Posts: 26	It's a spacer for the whole bellhousing. Looks to be about 3/4 of an inch in thickness.