Removing Door handles

I got another set of door handles for my 99 f350 that I had painted now going to put them on tonight or tomorrow and would like to know how to remove them as I have never messed w/ them before?

thanks

Start by taking the inside door panel off (there should be a couple bolts or screws under the armrest then slide it up). Then peel the plastic cover back to access the inside of the door (you don't need to peel it off totally). There should be two or three nuts on the back side of the handle. Take them off and then disconnect the two levers (one to run the latch and the other the lock) and pop the handle out. Then do everything in reverse to put it back together. To put the plastic back on if it doesn't want to stay two inch masking tape usually works well. Good luck.

hell i had everything off and i just could not figure out how in the world to get my hand or even a wrench in there to reach the 2 bolts that hold on the handle.