Rear axle seal replacement/ hub removal - Competition Diesel.Com

lightsOUT · 07-06-2017, 08:45 PM

So in conjunction with my other thread where I had parking brake issues I have also come to find out I have an oil leak problem too.

I didn't try to pull my axle to look inside but I'm assuming there will be a special nut in there that's set to a specific preload correct? Where can I get the socket and what is the torque spec? Also how difficult is it to remove the old seal and will I need a driver to install the new one?

06 DIESEL · 07-07-2017, 05:51 AM

On my 06 I did not need any special tools.

*zfaylor* · 07-07-2017, 05:58 AM

Usually there is a spanner nut in there. Rent the socket from an auto parts store.

ikeG · 08-10-2017, 08:19 AM

You will need this socket to tighten the spindle nut. It probably will loosen without it after removing the keyway but pretty much can't tighten it without the socket. A hammer and punch will probably work but not recommended.

07-06-2017, 08:45 PM	#1
lightsOUT Name: lightsOUT Title: Too Much Time Status: Not Here Join Date: Jun 2006 Location: saylorsburg, pa Member`s Gallery Posts: 1,515	Rear axle seal replacement/ hub removal So in conjunction with my other thread where I had parking brake issues I have also come to find out I have an oil leak problem too. I didn't try to pull my axle to look inside but I'm assuming there will be a special nut in there that's set to a specific preload correct? Where can I get the socket and what is the torque spec? Also how difficult is it to remove the old seal and will I need a driver to install the new one? __________________ Robert the dark side made me do it.........

07-07-2017, 05:58 AM	#3
zfaylor Name: zfaylor Title: Comp Diesel Sponsor Status: Not Here Join Date: Nov 2010 Location: P-TOWN!, Indiana Member`s Gallery Posts: 5,024	Usually there is a spanner nut in there. Rent the socket from an auto parts store. __________________ 2015 half ton heavy chevy 81 Fairmont LS project Many yard ornament projects... North American Turbo