Common rail high hp part out

[Onefastcr]

Engine
All the machine work was done by mhp (mountain high performance) here in Arvada Colorado. Engine has 10 passes at low horsepower on it. Was fully balance and everything was cryo treated. Complete long block including oil pan and front cover

6.7 block sleeved down to 5.9 with ductile iron sleeves with d&j fsr pistons 03/04 bowl with total seal rings
Carrillo hd billet rods
Clevite hd bearings
Block and head grooved for fire rings
D&j girdle with 9/16 studs
D&j billet front cover
Colt cam stage 5
Ati damper with 6.7 arp bolts
Cryo treated cummins oil pump
Ed block freeze plugs
5.9 head with Mhp oversized valves
Mhp valve springs
Mph push rods
ARP 12mm 625 headstuds
Haisley machine fire ring headgasket
Head freeze plugs are taped and plugged
Trend rocker bridges
Factory rocker arms
ARP rocker studs

Asking 19500$

Any questions just ask have all paper work from MHP.

I have two Firepunk built comp 3 48re
- 1st one is a brand new build I had for a spare it’s a comp 3 with a quad disk 2600rpm stall dpc convertor. All new asking 7500$ with 48re core.
- 2nd one is comp 3 but with a standard size output shaft. Has 25 passes on it. Comes with a quad disk 2200-2400rpm dpc convertor. Asking 6500 plus core.

Exergy 450% over 03/04 have 3 passes on them comes with 6.7 feed tube it have 3 passes on them to 4200$

Cp3 pumps
-Exergy 12mm 6.7 pump 3 passes on it 1950$
-fleece 10mm has 25 passes on it 1400$

Triple Turbos setup all billet ed chargers
Manifold charger is a s477/96/1.10 t6 with two s475/87/1.00 t4. All piping, clamps, oil feed, drains and stainless t6 manifold included. 6500$

Rpm data logger

‪DL28 with digital dash‬

‪Sensors ‬
‪2x300 psi‬
‪3x 200psi ‬
‪50 psi‬
‪100 psi‬

‪5x temp 0-300 degrees ‬

‪8 egt probe‬

‪Has 3 passes on it asking 3600$ ‬

Prices are picked up. Buyer pays shipping or arranges freight. I have a business address with forklift and can palletize anything.

Text or call 3038869862
I can send pictures just ask.

[Onefastcr]

Turbos sold

Price drop on
Injectors 4000$
Data logger 3200$

[Onefastcr]

10mm pump it a dmax lbz pump.

[Onefastcr]

This is what I have left

Firepunk built comp 3 48re with standard hp valve body. Brand new build I had for a spare it’s a comp 3 with a quad disk 2600rpm stall dpc convertor. All new asking 7500$ with 48re core.

Exergy 450% over 03/04 they have 3 passes on them comes with 6.7 feed tube it have 3 passes on them to 4000$

Cp3 pumps

-fleece 10mm lbz has 25 passes on it 1300$

Rpm data logger

‪DL28 with digital dash‬

‪Sensors ‬
‪2x300 psi‬
‪3x 200psi ‬
‪50 psi‬
‪100 psi‬

‪5x temp 0-300 degrees ‬

‪8 egt probe‬

‪Has 3 passes on it asking 3200$ ‬

‪Ats old style twin cp3 with dual rail setup to get the sensor out of the back of the top pump. Missing top radiator hose. 1400$‬ I also have every thing to make it work on every 5.9 minus apps bracket for 1000$

Stainless diesel manifolds both have been tapped for data logger. I can throw plugs in them if your not running a data logger.

T6 675$
T4 575$

Prices are picked up. Buyer pays shipping or arranges freight. I have a business address with forklift and can palletize anything.