Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 94-98 2nd Gen. 12V
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 09-14-2013, 03:49 AM   #1
GorillaDave
 
GorillaDave's Avatar

Name: GorillaDave
Title: AnÝbal Catastrophe
Status: Not Here
Join Date: Nov 2012
Location: Jamestown Tn
Member`s Gallery
Posts: 809
Changed TCC/OD solenoids now problematic.

I have been having issues with my lockup/OD staying engaged both before and after the rebuild, trans was rebuilt using a Suncoast extreme duty kit and a TFOD-3 valve body kit and has about 280mi on it as of today.

I bought new solenoids from BW, pulled vb, and replaced everything. I did notice what I feel is excessive material in the pan when I dropped it. No big chunks of anything, just a bit of material on the magnet and in the pan, the filter did seen to be completely plugged though. I did not adjust the bands and re-installed everything as it was before.

Filled it with fluid and now it seems as off the stall magically increased to 2k, did not do this before, stalled at about 1600. Seems like its slipping, it will move in all gears, but it doesn't seem to have the same fluid coupling it had before. The TC is a Daaco triple disk with what is supposed to be a stock stall. I'm pretty lost here.

What do suggest my next move be?
__________________
Currently diesel deprived
 
Old 09-14-2013, 09:50 AM   #2
12vriviera
 
12vriviera's Avatar

Name: 12vriviera
Title: That Guy with that car
Status: Not Here
Join Date: Mar 2009
Location: north texas
Member`s Gallery
Posts: 6,843
Did you use any specialty told when installing your od brake apply piston onto the back of the case? Or just hoped that both those lip seals went in right?
__________________
Brandon Carr.
Owner of the 24V RIV
Competition Diesel.Com - Bringing The BEST Together
I am a pushover
https://www.facebook.com/#!/24VRIVIERA
 
Old 09-14-2013, 09:55 AM   #3
GorillaDave
 
GorillaDave's Avatar

Name: GorillaDave
Title: AnÝbal Catastrophe
Status: Not Here
Join Date: Nov 2012
Location: Jamestown Tn
Member`s Gallery
Posts: 809
Everything internal was done by a seasoned builder, highly doubt it was put in on a hope and a prayer
__________________
Currently diesel deprived
 
Old 09-14-2013, 09:57 AM   #4
inline
 
inline's Avatar

Name: inline
Title: Professional lurker
Status: Not Here
Join Date: Apr 2011
Location: Rhode Island
Member`s Gallery
Posts: 805
How do you have lock up controlled?
TPS
switch
POT
__________________
2006 GMC VAN 6.6 Dmax
97 12v 4x4 sold
01 24v 2wd needs more go fast goodies
 
Old 09-14-2013, 10:08 AM   #5
GorillaDave
 
GorillaDave's Avatar

Name: GorillaDave
Title: AnÝbal Catastrophe
Status: Not Here
Join Date: Nov 2012
Location: Jamestown Tn
Member`s Gallery
Posts: 809
Switch
__________________
Currently diesel deprived
 
Old 09-14-2013, 10:11 AM   #6
GorillaDave
 
GorillaDave's Avatar

Name: GorillaDave
Title: AnÝbal Catastrophe
Status: Not Here
Join Date: Nov 2012
Location: Jamestown Tn
Member`s Gallery
Posts: 809
As of now. I checked the fluid again, was a touch low. Let it idle to get warm, has a strong fluid coupling again but no D, lockup or OD. I'm utterly confused now
__________________
Currently diesel deprived
 
Old 09-16-2013, 12:58 AM   #7
country_hick

Name: country_hick
Title: Green Behind the Ears
Status: Not Here
Join Date: Aug 2012
Member`s Gallery
Posts: 42
Quoting Rpegram on cumminsforum...

"If you are having issues with both lockup and cruise, I would look first at the brake light switch on the brake pedal. When you touch the brakes and rear brake lights come on, the converter should unlock and cruise disabled, both done by the PCM. You could also be having some issues with the temp sensor inside the trans. It is part of the pressure sensor and governor solenoid circuit, more precise it is inside the pressure sensor. "

"The TC is a triple disk" That is probably your problem. If I recall correctly a local transmission builder told me he stopped using that brand converters because in the last year he had 10 of them go bad. The only thing that would change the stall speed in the converter is either a BIG increase in engine power pushing the stall higher or a bad tc.

Last edited by country_hick; 09-16-2013 at 01:00 AM.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:25 PM.

 


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2017, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com