why did my headgasket fail?
I'm lost as to a reason why my headgasket failed.
Had only about 1000 miles on it, then it started running water down the side of the block.
I know it is a 4bt, but I think it as close to a 5.9 as I'm going to get, so mods feel free to move this to the right place if need be.
Was leaking from under the exhaust port on cylinder #3
I'm not sure what the failure was to make this happen.
any thoughts would be most appreciated
Thanks
__________________
1995 f-150 3.9 VE 4bt, hx30 over HE341, 5 x .012 bosch tips, Colt stage 2 cam grind, 4" mandrel exhaust all the way back, 3" mandrel IC piping with 06 RAM IC
Last edited by camccardell; 09-22-2015 at 09:54 PM.
|