Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Entrance Gate- Welcome to Competition Diesel > Competition Events and Get-Togethers > Full Pull Productions
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 09-17-2014, 07:38 PM   #1
rickFPP
 
rickFPP's Avatar

Name: rickFPP
Title: Promoter USA-EAST
Status: Not Here
Join Date: Mar 2008
Location: Western PA and South Florida
Member`s Gallery
Posts: 434
2.5 Diesel Class for 2015 ????

USA-EAST will host a meeting to discuss a possible 2.5 Diesel 4x4 class for the 2015 season. The meeting will be held at the Lawrence County Fairgrounds near New Castle, PA on Thursday, October 9, 2014 at 7:00pm. All interested parties are welcome to attend the meeting where rules will be discussed for the possible new class. IF you are not at the meeting ....

This is the ONLY meeting for the 2.5 diesel 4x4 class that is planned.

If this new class comes about, the current Work Stock Diesel 4x4 class with USA-EAST will be incorporated into the new 2.5 class.
 
Old 09-17-2014, 08:04 PM   #2
cummins724
 
cummins724's Avatar

Name: cummins724
Title: BREAKING $HIT
Status: Not Here
Join Date: Apr 2007
Member`s Gallery
Posts: 8,568
Nice!
__________________
CPP DIESEL
Edge-PPE-EFI LIVE-H&S-II-Airdog-Fass-Smarty-ARP-AFE-Autometer-Isspro-MBRP-DDP-South Bend Clutch-Valair-CUSTOM INJECTORS-DIY BUMPERS
www.CPPDIESEL.com
 
Old 09-18-2014, 07:29 AM   #3
rawdog
 
rawdog's Avatar

Name: rawdog
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Member`s Gallery
Posts: 2,196
Maybe after that the 2.6 class will get with the rest of the country
__________________
 
Old 09-23-2014, 07:29 PM   #4
PsdPullerJR
 
PsdPullerJR's Avatar

Name: PsdPullerJR
Title: Green Behind the Ears
Status: Not Here
Join Date: Feb 2009
Location: Western, PA
Member`s Gallery
Posts: 41
Any proposed rules so people have something to think about?
__________________
2000 PSD,AFE II,NV gauges,CPRX Fuel system,H2E,Stealth twins, Monster box,400/400s! 2005 F350 CCLB Lariat, stock, towing 2011 Golden GN.
Quote:
SLEDPULLER: Your sitting next to a legend, the only Ford to break at the same pull 2 years in row
 
Old 10-09-2014, 02:46 PM   #5
01 HO
 
01 HO's Avatar

Name: 01 HO
Title: Green Behind the Ears
Status: Not Here
Join Date: Mar 2011
Location: north jackson, oh
Member`s Gallery
Posts: 98
Is this still going on tonight?!?!? Haven't heard much else about this. What building at the fairgrounds?
__________________
s&b cai, flo-pro 5", FTE 125hp stick, fass titanium, smarty, edge drag comp, isspro ev2 guages, southbend DxD 3600 hd hydraulics, stanless diesel exh manifold, high tech turbo 62/65, third link traction bars, 2" leveling kit, mastercraft courser c/t 285/75r16
 
Old 10-09-2014, 03:55 PM   #6
TBittner
 
TBittner's Avatar

Name: TBittner
Title: Too Much Time
Status: Not Here
Join Date: Mar 2010
Location: Irwin, PA
Member`s Gallery
Posts: 462
Yes It is
 
Old 10-09-2014, 09:21 PM   #7
PsdPullerJR
 
PsdPullerJR's Avatar

Name: PsdPullerJR
Title: Green Behind the Ears
Status: Not Here
Join Date: Feb 2009
Location: Western, PA
Member`s Gallery
Posts: 41
Any word on what was discussed?
__________________
2000 PSD,AFE II,NV gauges,CPRX Fuel system,H2E,Stealth twins, Monster box,400/400s! 2005 F350 CCLB Lariat, stock, towing 2011 Golden GN.
Quote:
SLEDPULLER: Your sitting next to a legend, the only Ford to break at the same pull 2 years in row
 
Old 10-10-2014, 09:11 AM   #8
TBittner
 
TBittner's Avatar

Name: TBittner
Title: Too Much Time
Status: Not Here
Join Date: Mar 2010
Location: Irwin, PA
Member`s Gallery
Posts: 462
Anyone make the meeting and can share results?
 
Old 10-10-2014, 12:47 PM   #9
TBittner
 
TBittner's Avatar

Name: TBittner
Title: Too Much Time
Status: Not Here
Join Date: Mar 2010
Location: Irwin, PA
Member`s Gallery
Posts: 462
This is what I've heard so far:

1.Weight is set at 8500 front hanging weights permitted but no weight boxes
2.Map groove set at .150 inches will be a diagram to specify location acceptable for MWE
3.Single tire unless factory OEM dully truck
4. Dual ground contact patch of one side dual tires set at 18"
5.Air to Air
6.Hanging weights allowed 60" front axle no weight boxes
7.8500lbs max weight
8.Intake runners allowed
9.No frame Turbo specification all of these would be ok s-400 Frame, HX50, GT42
10.True 2.5 no clipped wheels or stepped covers, all air must go through the 2.5 inducer bore, plug 2.550
11.Safety: fire extinguisher,no fire suit, trans covers, air shut off
12.Drive shaft loops highly suggested

Still needs confirmed with USA east tech committee
 
Old 10-10-2014, 03:03 PM   #10
ecc_33
 
ecc_33's Avatar

Name: ecc_33
Title: Amanda, Ohio
Status: Not Here
Join Date: Feb 2008
Location: Amanda Ohio
Member`s Gallery
Posts: 487
WTF LMAO 8500lbs? Were in the fook did they pull these turbo rules from? Wow I hope that was a joke! Duallys aloud only on duallys? And they are allowed 18"s of tire. Wow simply amazing.
__________________
02 chevy, Black ECLB
S475, ATS tranny parts, ATS Dual Fuelers,FASS 95gph tuff country lift, SD parts, Carrillo rods, H11 head studs, 60% over injectors, Custom BES heads and machine work, hamilton valve springs, ATI damper 11.63 at 116mph
 
Old 10-10-2014, 03:19 PM   #11
ComnRailPwr
 
ComnRailPwr's Avatar

Name: ComnRailPwr
Title: Too Much Time
Status: Not Here
Join Date: Jun 2009
Location: Stoutsville , OH
Member`s Gallery
Posts: 3,293
With rules like posted theirs no point in 2.5 class. 8500# Dually trucks slinging a non protruding s480 with a bell pressed in the cover. Hopefully there is a lot more definition to the turbo rule.
 
Old 10-10-2014, 06:52 PM   #12
nwpadmax
 
nwpadmax's Avatar

Name: nwpadmax
Title: Turbo Geek
Status: Not Here
Join Date: Nov 2006
Location: Out in the shop
Member`s Gallery
Posts: 3,128
Quote:
Originally Posted by ComnRailPwr View Post
With rules like posted theirs no point in 2.5 class. 8500# Dually trucks slinging a non protruding s480 with a bell pressed in the cover. Hopefully there is a lot more definition to the turbo rule.
There was no intention to have a class like yours at ~1000hp. The intention was be be down several hundred HP from that.

Everybody else is doing their own thing, and that's fine with them...so how about being fine with this? I believe this will be a great common sense 2.5 class that eliminates all the BS that we saw play out in the disaster 2.6 has become.

If you don't like it, don't pull it, pretty simple. FPP work stock hooks had good turnout last year and this bumps the HP up a hair and levels the playing field for Ford and Dodge. Explain how that is a negative.

Call it hot workstock if you want.
__________________
"What I said does equate too what can happen....Alote."

Last edited by nwpadmax; 10-10-2014 at 07:03 PM.
 
Old 10-10-2014, 06:57 PM   #13
97rada
 
97rada's Avatar

Name: 97rada
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Member`s Gallery
Posts: 5,410
2.5 Diesel Class for 2015 ????

Quote:
Originally Posted by nwpadmax View Post
There was no intention to have a class like yours at ~1000hp.

Everybody else is doing their own thing, and that's fine with them...so how about being fine with this? I believe this will be a great common sense 2.5 class that eliminates all the BS that we saw play out in the disaster 2.6 has become.

If you don't like it, don't pull it, pretty simple. FPP work stock hooks had good turnout last year and this bumps the HP up a hair and levels the playing field for Ford and Dodge. Explain how that is a negative.

Call it hot workstock if you want.

He was saying the turbo rules are not clear at all. I could run a bushed s480 and pass your rules. It needs to have more map wording. More protrusion rules ect. Basically saying if you don't it WILL end up like 2.6
I think a very hot work stock woukd be a fun class


Sent from my iPhone using Tapatalk
__________________
Austin
tow truck- 14-3500 with tuning
toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s

Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.

Last edited by 97rada; 10-10-2014 at 06:58 PM.
 
Old 10-10-2014, 07:00 PM   #14
nwpadmax
 
nwpadmax's Avatar

Name: nwpadmax
Title: Turbo Geek
Status: Not Here
Join Date: Nov 2006
Location: Out in the shop
Member`s Gallery
Posts: 3,128
Wait for the specific wording to come out before dreaming up stupid BS like an S480 with a bell....come on, folks. The meeting was a discussion time and the final rules will be posted when they are.....FINAL...

We are going have a 2.5 inducer, with some small amount of protrusion that does not require everyone to go buy a custom wheel (since no factory wheel has 1/8" protrusion).... and put essentially a stock MWE in a normal stock location. That help? No secondary inducers!

Think along the lines of what a stock GT4088 or S464 compressor inlet looks like....and that's what this will look like when we get the wording down exactly....and a drawing will be provided.
__________________
"What I said does equate too what can happen....Alote."

Last edited by nwpadmax; 10-10-2014 at 07:03 PM.
 
Old 10-10-2014, 07:28 PM   #15
PsdPullerJR
 
PsdPullerJR's Avatar

Name: PsdPullerJR
Title: Green Behind the Ears
Status: Not Here
Join Date: Feb 2009
Location: Western, PA
Member`s Gallery
Posts: 41
Intake runners? So the cummins can mill the side off and run the zz or something like that? Looks like the mid pack 2.6 guys don't want to put the super farm charger on so it'll just be add 500 lbs and change the cover and make a class for themselves. After the mess with 2.6 you would think it would be a smooth bore to control it and not leave the grey area open because to know dang well it'll be gotten around.
__________________
2000 PSD,AFE II,NV gauges,CPRX Fuel system,H2E,Stealth twins, Monster box,400/400s! 2005 F350 CCLB Lariat, stock, towing 2011 Golden GN.
Quote:
SLEDPULLER: Your sitting next to a legend, the only Ford to break at the same pull 2 years in row
 
Old 10-10-2014, 07:34 PM   #16
nwpadmax
 
nwpadmax's Avatar

Name: nwpadmax
Title: Turbo Geek
Status: Not Here
Join Date: Nov 2006
Location: Out in the shop
Member`s Gallery
Posts: 3,128
Quote:
Originally Posted by PsdPullerJR View Post
Intake runners? So the cummins can mill the side off and run the zz or something like that? Looks like the mid pack 2.6 guys don't want to put the super farm charger on so it'll just be add 500 lbs and change the cover and make a class for themselves. After the mess with 2.6 you would think it would be a smooth bore to control it and not leave the grey area open because to know dang well it'll be gotten around.
Smoothbore is nice from a technical standpoint. How many guys you know have a 2.5 smoothbore charger to start the class? And you want to tell stock chargered trucks they can't pull?

This minimizes gray area and allows a guy with a box S464 to come hook. And everyone with stock chargers is in as long as they meet the measurements (and all already do to my knowledge). We wanted to include as many hot street trucks as possible. This will do that.

Everything is a compromise. The 8500 is so that the newest duallies can come hook without having to strip it down.

And yes if you think running a ZZ fab intake (on a Dmax or Cummins or PSD) with a small charger and no air/water intercooler is a good use of your dollars....well go ahead, ....
__________________
"What I said does equate too what can happen....Alote."

Last edited by nwpadmax; 10-10-2014 at 07:40 PM.
 
Old 10-10-2014, 07:43 PM   #17
ecc_33
 
ecc_33's Avatar

Name: ecc_33
Title: Amanda, Ohio
Status: Not Here
Join Date: Feb 2008
Location: Amanda Ohio
Member`s Gallery
Posts: 487
Waiting for the single cp3 rule and no ag governors...... Seriously though. Someone comes in with a first gen cummins dually. Throws 2500lbs on the nose with some tire setup that puts more rubber on the ground than any set of 4 tires. Has a custom turbo made to your rules setting on the side of a full roller scheid engine. And just pounds the class night after night. Imho I would just adopt something local that way the other 2.5 guys don't have to yet again buy another charger to compete if they want to come play. I truley hope this all works out for you guys. These turbo guys are once again licking there chops and loving all these turbo rules popping up all over the country.
__________________
02 chevy, Black ECLB
S475, ATS tranny parts, ATS Dual Fuelers,FASS 95gph tuff country lift, SD parts, Carrillo rods, H11 head studs, 60% over injectors, Custom BES heads and machine work, hamilton valve springs, ATI damper 11.63 at 116mph

Last edited by ecc_33; 10-10-2014 at 07:52 PM.
 
Old 10-10-2014, 07:50 PM   #18
nwpadmax
 
nwpadmax's Avatar

Name: nwpadmax
Title: Turbo Geek
Status: Not Here
Join Date: Nov 2006
Location: Out in the shop
Member`s Gallery
Posts: 3,128
Quote:
Originally Posted by ecc_33 View Post
Waiting for the single cp3 rule and no ag governors...... Seriously though. Someone comes in with a first gen cummins dually. Throws 2500lbs on the nose with some tire setup that puts more rubber on the ground than any set of 4 tires. Has one of your custom turbos made to your rules. And just pounds the class night after night. Imho I would just adopt something local that way the other 2.5 guys don't have to yet again buy another charger to compete if they want to come play. I truley hope this all works out for you guys.
Dude, the single CP3 rule makes the common rail guys spend $3k to keep up with the P-pump guys, this has been hashed out forever. It makes no sense.

Yes, a specialized truck is going to win. They do that a lot. Last year my buddy in a single big CP3 Dmax was the top of the WS class. This lets the other two brands have their fair shot. That's a good thing.

Are you suggesting we should add a 35x12.50 single tire limit? Can still be put in.
__________________
"What I said does equate too what can happen....Alote."

Last edited by nwpadmax; 10-10-2014 at 07:51 PM.
 
Old 10-10-2014, 07:56 PM   #19
ecc_33
 
ecc_33's Avatar

Name: ecc_33
Title: Amanda, Ohio
Status: Not Here
Join Date: Feb 2008
Location: Amanda Ohio
Member`s Gallery
Posts: 487
Now we are on the same page! Yes, Single tire limit 35x12.50 would be plenty of tire for a 2.5 truck. That makes duallys pull on wheel off the back and still fit the rules. Can also easily lighten up a heavy dually truck by having lighter alumn. rims.
__________________
02 chevy, Black ECLB
S475, ATS tranny parts, ATS Dual Fuelers,FASS 95gph tuff country lift, SD parts, Carrillo rods, H11 head studs, 60% over injectors, Custom BES heads and machine work, hamilton valve springs, ATI damper 11.63 at 116mph
 
Old 10-10-2014, 07:57 PM   #20
nwpadmax
 
nwpadmax's Avatar

Name: nwpadmax
Title: Turbo Geek
Status: Not Here
Join Date: Nov 2006
Location: Out in the shop
Member`s Gallery
Posts: 3,128
Well we kicked around a 245 limit on duallies.....the suggested verbiage is basically 9" tread width per dually tire, and I haven't measured many to see if that is overkill. How wide is a BFG 245 at the tread (not the section width you see on the web site)?

A single limit is fine with me, maybe others will chime in on that.

Maybe we can revisit that.
__________________
"What I said does equate too what can happen....Alote."

Last edited by nwpadmax; 10-10-2014 at 08:00 PM.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com