12v and 24v stock parts

12v intake plate and horn $25
12v harmonic balancer $50
2 24v 5.9 heads need gone through $200 each
24v gear housing and tin cover $50
12v gear housing and cover $125
P pump gear $100 sell housing and gear for $200
24v rear main seal plate $20
12v stock cam $25

All prices are plus shipping. And obo.

Thanks,
Ben

Sent from my SM-G892A using Tapatalk

Bump closing on my new house in a month, would like to sell some of this stuff so I don't have to move it. Make offers!

Also adding some parts:

96 12v longblock, melted a piston or 2 needs rebuilt. $1,000 $1800 with a good 180 pump

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $300

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $200

Feel free to make offers, can arrange shipping through fastenal if need be.

Thanks!

Sent from my SM-G892A using Tapatalk

Do you have the stock air filter box? I’m looking for the filter minder.


Sent from my iPhone using Tapatalk

The intake horn and plate from a ppump engine?

Yes muddin dude,

I dont have a dodge filter minder, but there may be one on a ford airbox I have.

Sent from my SM-G892A using Tapatalk

Updated list and pricing

12v harmonic balancer $40

2 24v 5.9 heads need gone through $175 each

24v gear housing and tin cover $40

12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $100 can send pics

24v rear main seal plate $15

12v stock cam $20

96 12v longblock, melted a piston or 2 needs rebuilt. $800

Good 180 pump $800

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $275

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $175

All prices obo plus shipping.

Getting closer to moving time, make offers!

Thanks,

Ben

Sent from my SM-G892A using Tapatalk

Pics of the broken ear on gear housing, 96 core longblock, and the 24v heads.

Sent from my SM-G892A using Tapatalk

Bump with price updates!

12v harmonic balancer $30

2 24v 5.9 heads need gone through $150 each

24v gear housing and tin cover $30

12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $80 can send pics

24v rear main seal plate $10

12v stock cam $15

96 12v longblock, melted a piston or 2 needs rebuilt. $750

Good 180 pump $750

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $250

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $150

All prices obo plus shipping.

Getting closer to moving time, make offers!

Sent from my SM-G892A using Tapatalk

Dm me some pics of the 24 valve timing cover please.

PM'd you on the pump

Still have the 12v gearcase ? Not letting me send you a pm for some reason


Sent from my iPhone using Tapatalk

Have the front breather that goes on the timing cover, and fuel filter housing?