01 P Pump Build - Competition Diesel.Com

EvanBoothe · 02-20-2014, 07:34 AM

12 valve I bought for the project only 500 bucks!

Powder coat

Sent from my iPhone using Tapatalk

EvanBoothe · 02-20-2014, 07:42 AM

Sent from my iPhone using Tapatalk

Ghostman · 02-20-2014, 07:50 AM

Keep it up!

EvanBoothe · 02-20-2014, 08:02 AM

Thanks man will do ha

Sent from my iPhone using Tapatalk

EvanBoothe · 02-20-2014, 08:36 AM

Sent from my iPhone using Tapatalk

Headcase98002 · 02-20-2014, 11:09 AM

I tried that route with the fuel pump block off, but instead I ended up cutting the top shelf off the original bracket since it was supporting my wiring harness. Looks good though.

EvanBoothe · 02-20-2014, 02:59 PM

Yeah I'm not 100% sure if I'll run that block off plate or not yet because of the wiring harness but well see. It was only 7 bucks couldn't pass it up.

Sent from my iPhone using Tapatalk

EvanBoothe · 02-21-2014, 12:11 PM

Sent from my iPhone using Tapatalk

EvanBoothe · 02-21-2014, 01:34 PM

I got a pretty uncommon pump, it took me awhile to figure out what it was off of but luckily a buddy of mine gave me a guys number in Charolett North Carolina that builds pumps and let me tell you he knows his stuff. Pump will be going to him to be built here soon.

Sent from my iPhone using Tapatalk

WhiteKnight · 02-23-2014, 08:42 PM

looks good!

EvanBoothe · 02-23-2014, 09:39 PM

Thanks buddy.

Sent from my iPhone using Tapatalk

EvanBoothe · 03-01-2014, 04:09 PM

Loaded up the block in the snow and hauled her out to the machine shop.. Won't be doing much here for 3 to 4 weeks.

Sent from my iPhone using Tapatalk

EvanBoothe · 03-02-2014, 07:14 AM

Built a new bench for the build

Sent from my iPhone using Tapatalk

EvanBoothe · 03-02-2014, 07:14 AM

Sent from my iPhone using Tapatalk

EvanBoothe · 03-20-2014, 10:19 AM

Sent from my iPhone using Tapatalk

Ghostman · 03-20-2014, 11:47 AM

What color?

Sent from my iPhone using Tapatalk

EvanBoothe · 03-20-2014, 03:05 PM

Red I'm thinking. I have a lot of the components powder coated red..

Sent from my iPhone using Tapatalk

not enoughsmoke · 03-20-2014, 04:35 PM

looking good. I would do cast iron gray on the block to set off the red.

EvanBoothe · 03-21-2014, 10:14 AM

Quote:

Originally Posted by not enoughsmoke

looking good. I would do cast iron gray on the block to set off the red.

That would be cool.. I may think about that one. Idk I think red would look good too..

Sent from my iPhone using Tapatalk

EvanBoothe · 03-21-2014, 10:15 AM

I painted one side and decided to strip it and wire wheel the block a bit more.. Ill primer and paint it again this weekend.

Sent from my iPhone using Tapatalk

02-20-2014, 07:34 AM	#1
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	01 P Pump Build 12 valve I bought for the project only 500 bucks! Powder coat Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-20-2014, 07:42 AM	#2
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-20-2014, 08:02 AM	#4
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Thanks man will do ha Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-20-2014, 08:36 AM	#5
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	01 P Pump Build Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-20-2014, 11:09 AM	#6
Headcase98002 Name: Headcase98002 Title: Too Much Time Status: Not Here Join Date: Sep 2010 Location: Edinburgh, Indiana Member`s Gallery Posts: 1,631	I tried that route with the fuel pump block off, but instead I ended up cutting the top shelf off the original bracket since it was supporting my wiring harness. Looks good though. __________________ 1998 QCDRW 4x4 - p24v, 4k's, 024's, SAC 6x.013's, s363/68/.83 - HT4B, BD Intercooler, ATS T4 Manifold, 6" Exhaust, FirePunk Trans, Hamilton Springs & Push Rods, ISS Pro Gauges, exc.....

02-20-2014, 02:59 PM	#7
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Yeah I'm not 100% sure if I'll run that block off plate or not yet because of the wiring harness but well see. It was only 7 bucks couldn't pass it up. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-21-2014, 12:11 PM	#8
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-21-2014, 01:34 PM	#9
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	I got a pretty uncommon pump, it took me awhile to figure out what it was off of but luckily a buddy of mine gave me a guys number in Charolett North Carolina that builds pumps and let me tell you he knows his stuff. Pump will be going to him to be built here soon. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

02-23-2014, 08:42 PM	#10
WhiteKnight Name: WhiteKnight Title: Too Much Time Status: Not Here Join Date: May 2009 Location: Brewster, MA Member`s Gallery Posts: 645	looks good! __________________ 98.5 24v P7100, s485

02-23-2014, 09:39 PM	#11
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Thanks buddy. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

03-01-2014, 04:09 PM	#12
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	01 P Pump Build Loaded up the block in the snow and hauled her out to the machine shop.. Won't be doing much here for 3 to 4 weeks. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

03-02-2014, 07:14 AM	#13
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Built a new bench for the build Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

03-20-2014, 10:19 AM	#15
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

03-20-2014, 03:05 PM	#17
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	Red I'm thinking. I have a lot of the components powder coated red.. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)

03-20-2014, 04:35 PM	#18
not enoughsmoke Name: not enoughsmoke Title: floatin in tha gulf Status: Not Here Join Date: Dec 2008 Location: tenn Member`s Gallery Posts: 5,730	looking good. I would do cast iron gray on the block to set off the red. __________________ 1995 F350 Powerstroke 1995 F350 Fummins 1995 F250 lightning clone 1968 Fastback GT 2003 F150 1994 F350 IDIT 1988 F350 IDIT 2003 Dodge 2500 1999 F250 Powerstroke 1993 F250 Fummins 1979 F350

03-21-2014, 10:15 AM	#20
EvanBoothe Name: EvanBoothe Title: Too Much Time Status: Not Here Join Date: Mar 2013 Location: Salem, Ohio Member`s Gallery Posts: 253	I painted one side and decided to strip it and wire wheel the block a bit more.. Ill primer and paint it again this weekend. Sent from my iPhone using Tapatalk __________________ 2001 P-Pump 24 valve, colt stage 5, mahle clevite rebuild kit, .125 valve reliefs, keating machine Billit front cover, 215 benched p pump. (Motor still being built this is all I have so far)