97 2500 4x4 part out feeler. - Competition Diesel.Com

9712valve · 03-15-2010, 06:34 PM

I might be looking to part out my 97 2500 with a 12v in it. most everything has been replaced, and the few things that haven't only have 143,000 miles on them.
heres a list.

1900 for the engine with arp head studs, 180hp pump 0 plate, 4kgsk, ddp delivery valves, mack rack plug, and pump timed at 18* also the shut off solenoid was replaced in the fall. the engine only has 143,000 miles on it starts mint, and runs great. also it has a new oil pan, tapped for a 2nd oil drain, and leaks nothing. or 1400 for the engine minus the pump.

800 for the transfer case, 241DHD rebuilt last april including a new chain, shifts in and out 4wd flawlessly and leaks nothing.

900 for the rear axle 4.10's limited slip, was rebuilt in april with the transfer case, so they both have low miles and are mint.

700 for the front axle 4.10's comes complete with hub to hub. The hubs, u-joints, rotors were replaced 2 octobers ago. so the front axle is good to go.

3600 for transmission 47re, 92% tripple disc suncoast converter, fully built transmission except for intermediate shaft and stock valvebody was worked over, also tranny has mag-hytec double deep pan, and fluid was recently changed and looked good.

1000 for pius' msb1250 which is still tight and works well. includes downpipe, and t3-t6 adapter.

all prices are obo too, and the best way to reach me is by pming on here or call/txt 860-573-1244

thanks for looking. oh im located in ct, 15 mins east of hartford.

9712valve · 03-15-2010, 07:02 PM

also good stock intercooler, 150 and nice aluminum radiator which is only 2yrs old. 250.

buzzindozen · 03-15-2010, 08:34 PM

Interested in the radiator where are you located? Thanks Jay

9jhester · 03-16-2010, 01:06 AM

Says 15 mins east of Hartford, Ct

mwwarner · 03-16-2010, 03:06 AM

are you parting out the rest of the truck i need a bed

Big R · 03-16-2010, 06:18 AM

Quote:

Originally Posted by mwwarner

are you parting out the rest of the truck i need a bed

x2....interested what your doing with the bed

buzzindozen · 03-16-2010, 08:45 AM

Yea I see that must have been reading to fast. I am located in New York but often tracel to CT. Wondering when the best time to stop in would be?

9712valve · 03-16-2010, 11:49 AM

Quote:

Originally Posted by mwwarner

are you parting out the rest of the truck i need a bed

yes, I will be parting out the entire truck if i see enough interest.

GotTorque? · 03-16-2010, 11:59 AM

I can vouch for this truck and everything runs excellent!

Pangela · 03-16-2010, 01:14 PM

Why are you parting it out, why not just sell it whole? Or was that something I missed...

bigstacks95 · 03-16-2010, 06:40 PM

How much for the truck complete, Ryan?

9712valve · 03-16-2010, 08:04 PM

Quote:

Originally Posted by Pangela

Why are you parting it out, why not just sell it whole? Or was that something I missed...

I think I could do better if i part it out, then selling it as a whole.

9712valve · 03-16-2010, 08:06 PM

Quote:

Originally Posted by bigstacks95

How much for the truck complete, Ryan?

$9000 for the truck complete but with a stock engine except for headstuds and the pump being timed at 18*

with new rockers, lower door skins, paint and the truck would be pretty much mint, oh it needs a new headliner too, it has a brand new 4" mbrp exhaust with a muffler on it so its nice and quiet.

9712valve · 03-16-2010, 08:14 PM

heres what the truck looks like all cleaned up

biscuit87 · 03-16-2010, 11:13 PM

pm me about the engine im super interested and in dire need of one thanks

red dodge2 · 03-16-2010, 11:15 PM

Why are you parting it out? thats a nice truck yet!

9712valve · 03-17-2010, 01:02 AM

Quote:

Originally Posted by red dodge2

Why are you parting it out? thats a nice truck yet!

looks nice in that picture, which was taken on the date in the picture, but it needs rockers, lower door skins, needs a hood, hinges have been screwed up since i bought the truck 3 yrs ago, and the front clip is darker then the doors and bed. oh the front bumper needs new plastics also and the grille needs to be replaced, and all 4 wheels are bent

so another 5000 and i'll almost have a half decent truck. it still needs a tps, headliner, new front driveshaft, new pads again, shocks all around, and i think thats about it.

12valveAnderson · 03-28-2010, 08:55 PM

transmission cooler?

03-15-2010, 06:34 PM	#1
9712valve Name: 9712valve Title: Turtle Racer Status: Not Here Join Date: Dec 2007 Location: CT Member`s Gallery Posts: 1,879	97 2500 4x4 part out feeler. I might be looking to part out my 97 2500 with a 12v in it. most everything has been replaced, and the few things that haven't only have 143,000 miles on them. heres a list. 1900 for the engine with arp head studs, 180hp pump 0 plate, 4kgsk, ddp delivery valves, mack rack plug, and pump timed at 18* also the shut off solenoid was replaced in the fall. the engine only has 143,000 miles on it starts mint, and runs great. also it has a new oil pan, tapped for a 2nd oil drain, and leaks nothing. or 1400 for the engine minus the pump. 800 for the transfer case, 241DHD rebuilt last april including a new chain, shifts in and out 4wd flawlessly and leaks nothing. 900 for the rear axle 4.10's limited slip, was rebuilt in april with the transfer case, so they both have low miles and are mint. 700 for the front axle 4.10's comes complete with hub to hub. The hubs, u-joints, rotors were replaced 2 octobers ago. so the front axle is good to go. 3600 for transmission 47re, 92% tripple disc suncoast converter, fully built transmission except for intermediate shaft and stock valvebody was worked over, also tranny has mag-hytec double deep pan, and fluid was recently changed and looked good. 1000 for pius' msb1250 which is still tight and works well. includes downpipe, and t3-t6 adapter. all prices are obo too, and the best way to reach me is by pming on here or call/txt 860-573-1244 thanks for looking. oh im located in ct, 15 mins east of hartford. __________________ 18 f350 rclb 6.7 stock 10 f350 ccsb 6.4 deleted s467 fmw with race cover. Sold 05 f250 rclb 6.0 looney tuned. 94 2500 rclb 12v stock for now 1000hp build in progress

03-15-2010, 07:02 PM	#2
9712valve Name: 9712valve Title: Turtle Racer Status: Not Here Join Date: Dec 2007 Location: CT Member`s Gallery Posts: 1,879	also good stock intercooler, 150 and nice aluminum radiator which is only 2yrs old. 250. __________________ 18 f350 rclb 6.7 stock 10 f350 ccsb 6.4 deleted s467 fmw with race cover. Sold 05 f250 rclb 6.0 looney tuned. 94 2500 rclb 12v stock for now 1000hp build in progress

03-16-2010, 01:06 AM	#4
9jhester Name: 9jhester Title: Too Much Time Status: Not Here Join Date: Feb 2009 Member`s Gallery Posts: 414	Says 15 mins east of Hartford, Ct __________________ Justin 2001 Dodge Ram 2500 QCSB Garmon's Diesel Schied Diesel Industrial Injection Diamo

03-16-2010, 11:59 AM	#9
GotTorque? Name: GotTorque? Title: Diesel Enthusiast Status: Not Here Join Date: Apr 2007 Location: Central CT Member`s Gallery Posts: 106	I can vouch for this truck and everything runs excellent! __________________ 98 12 valve ECLB DDP stage 3's, JRE #6 fuel plate, 191 DV's,3k GSK, 16* timing, PDR intercooler, BD super B turbo, 4"-5" dual stacks, ISSAPRO Gauges, AFE Intake, 4.5" Rough Country Lift, 36x14.5 Parnelli Jones Dirt Grips, 16x10 Polished Eagle Alloy 058's

03-16-2010, 01:14 PM	#10
Pangela Name: Pangela Title: Not here. Status: Not Here Join Date: May 2007 Location: Northern California Member`s Gallery Posts: 3,524	Why are you parting it out, why not just sell it whole? Or was that something I missed... __________________ peace out.

03-15-2010, 08:34 PM	#3
buzzindozen Name: buzzindozen Title: Rookie Status: Not Here Join Date: Dec 2009 Member`s Gallery Posts: 26	Interested in the radiator where are you located? Thanks Jay

03-16-2010, 03:06 AM	#5
mwwarner Name: mwwarner Title: diesel tec student Status: Not Here Join Date: Nov 2009 Location: warren, pa and college in lima,oh Member`s Gallery Posts: 57	are you parting out the rest of the truck i need a bed

03-16-2010, 08:45 AM	#7
buzzindozen Name: buzzindozen Title: Rookie Status: Not Here Join Date: Dec 2009 Member`s Gallery Posts: 26	Yea I see that must have been reading to fast. I am located in New York but often tracel to CT. Wondering when the best time to stop in would be?

03-16-2010, 06:40 PM	#11
bigstacks95 Name: bigstacks95 Title: Diesel Doc Status: Not Here Join Date: Jul 2008 Location: Falls Village, CT Member`s Gallery Posts: 2,030	How much for the truck complete, Ryan? __________________ --Dave-- 58 Dodge Power Wagon 3.0 Limited Pro Stock diesel pulling truck 2020 Ram 3500 HO/Aisin Laramie/night tow rig

03-16-2010, 08:14 PM	#14
9712valve Name: 9712valve Title: Turtle Racer Status: Not Here Join Date: Dec 2007 Location: CT Member`s Gallery Posts: 1,879	heres what the truck looks like all cleaned up __________________ 18 f350 rclb 6.7 stock 10 f350 ccsb 6.4 deleted s467 fmw with race cover. Sold 05 f250 rclb 6.0 looney tuned. 94 2500 rclb 12v stock for now 1000hp build in progress

03-16-2010, 11:13 PM	#15
biscuit87 Name: biscuit87 Title: Green Behind the Ears Status: Not Here Join Date: Dec 2009 Location: Byram, MS Member`s Gallery Posts: 60	pm me about the engine im super interested and in dire need of one thanks

03-16-2010, 11:15 PM	#16
red dodge2 Name: red dodge2 Title: Too Much Time Status: Not Here Join Date: Feb 2008 Location: Ireland, Indiana Member`s Gallery Posts: 3,803	Why are you parting it out? thats a nice truck yet! __________________ Sunday driver: 01 6psd laramie Tow rig: 2022 ram 3500 Laramie puller: 97 3.6 pro stock diesel truck "CUMMIN ATCHA" thanks to: Puredieselpower, Haisley Machine, Miley machine & fabrication, Northeast Diesel

03-28-2010, 08:55 PM	#18
12valveAnderson Name: 12valveAnderson Title: Green Behind the Ears Status: Not Here Join Date: Jun 2009 Location: PA Member`s Gallery Posts: 65	transmission cooler?