Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 94-98 2nd Gen. 12V
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Reply
 
Thread Tools
Old 06-12-2018, 08:11 PM   #1
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
11s or bust

1995 single cab 4x4
180 pump- free mods, no plate
4ks
Custom afc spring from turbo 2387
20*
7mm Pdd delivery valves
5x.018s (soon)- from dieseladdict
71mm k31 71/76/.9ar s400 exhaust housing from dieseladdict
Stock stall triple
Modified cummins lift pump
3.54 gears
Traction bars
Modified valve body for lockup while manually shifting
Gpz frictions
Extra frictions in direct and od
Billet input and output
Floor shifter
Stock rims and tires
Zex bottle with 4an and 3an lines, new .091" cheater solenoid , dry fogger nozzle with a hand full of jets from .040- .080"
I have a wot switch and adjustable Hobbs switch set at 25 psi- never tried spray yet.

Haven't been to the track in 4 years

A sump , t4 manifold and arp 2000s are on the list. I think I'm going to go wth the junker drag truck fuel system checkball setup.

The stock headbolts have been taking 60 psi several times a week for the last 8 months


Here are some pics
Attached Images
File Type: png IMG_8948.PNG (769.1 KB, 0 views)
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 08:13 PM   #2
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Here are some more pics
Attached Images
File Type: png IMG_8947.PNG (866.6 KB, 0 views)
File Type: png IMG_8945.PNG (550.8 KB, 0 views)
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 08:15 PM   #3
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Some more
Attached Images
File Type: png IMG_8949.PNG (270.2 KB, 0 views)
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 08:19 PM   #4
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Pic without the cover
Attached Images
File Type: png IMG_8950.PNG (888.5 KB, 0 views)
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 08:31 PM   #5
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
I have the trans out for the 3rd rebuild in 6 years. Each time it gets a little better. This will be rebuild number 17 for me. I made a mount that bolts up to an engine stand head. But I tripped over the legs of the stand and it felt a little tippy. So I welded a a piece of pipe and angle I had laying around and mounted that to my table. It also raised the trans up higher so I don't have to bend over it as much. You can also fit a 5 gallon bucket under it
Attached Images
File Type: jpg IMG_8764.jpg (265.8 KB, 0 views)
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 08:49 PM   #6
thatguy69
 
thatguy69's Avatar

Name: thatguy69
Title: Too Much Time
Status: Not Here
Join Date: Jul 2011
Location: Mansfield Ohio
Member`s Gallery
Posts: 495
I like your tranny rebuild stand

Sent from my SM-N910V using Tapatalk
__________________
1999 24V ECLB.118k. Edge juice w/ATT, Homebrew billet 47RE with anteater,FASS Ti150,DAP 7x14's,62/475,Manton pushrods,Crower springs,ARP 425,
Never ending money pit
  Reply With Quote
Old 06-12-2018, 09:09 PM   #7
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Thanks. I didn't make that until build number 12. I was tired of wrestling them on the bench and tearing them down on floor on a large pan. Doesn't look as good to people paying for the build either. The mount also pivots back and forth where the angle has a thru bolt on the table. So I can swing it out of the way when I pull a truck in.
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-12-2018, 09:09 PM   #8
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Usually my work table isn't that cluttered.
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Old 06-13-2018, 07:35 AM   #9
Red Sleeper
 
Red Sleeper's Avatar

Name: Red Sleeper
Title: So God Made a Farmer
Status: Not Here
Join Date: Aug 2009
Location: TEXAS
Member`s Gallery
Posts: 3,023
When are you headed to the track?
__________________
Nick J
14' Silverado LTZ 4x4 5.3 Long Tubes, Cat-less, Tuned.
05' Cummins. QCSB. Built 48RE, Smarty, H2O/CH4O, ARP 425. Currently Under Construction
91' Cummins w350 5spd, ARP 625, Valve Springs, Rough Rider
  Reply With Quote
Old 06-13-2018, 08:19 AM   #10
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 581
Mike please tell people about your dry rotted junk yard tires. it will make 11's feel like 9's
  Reply With Quote
Old 06-13-2018, 12:55 PM   #11
SCHMITTY
 
SCHMITTY's Avatar

Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 976
Yes the stock size used load range e tires spin nicely.

The track closes on Labor Day for the year. So sometime before that is when I plan to go.
__________________
95 rclb, K31 71/76/.9, 180 pump, 5x.016s, 7mm dv , stock stall triple

2006 mega cab Stock grocery getter with a straight pipe and exergy sportsman injectors.
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:11 AM.

 


Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2018, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com