Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 98-02 2nd Gen.
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Reply
 
Thread Tools
Old 09-27-2019, 12:01 AM   #1
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Mechanical advancing timing

I put senser on billet cover that I been working on for awhile and I advanced the pump 1 tooth which should be 5*! And ainít got a Communication to ecm to pump so I got it fooling the ecm. The problem Iím having is it donít start good, I put a new hotrod pump on and thought it was bad but I put my SO pump back on to check and it starts a little better but cranks a good bit!

I was wondering the ones that have advanced the timing and fooling the ecm how it started?

I know Industerial did it 10* by the gears.

If u advanced it and didnt move the senser or didnít run Industerials gears please donít reply!
  Reply With Quote
Old 09-27-2019, 07:41 AM   #2
mhuggler

Name: mhuggler
Title: One piece at a time
Status: Not Here
Join Date: Sep 2007
Location: Uno, Pa.
Member`s Gallery
Posts: 933
Aside from the motley assortment of additional errors, did you really just say "it don't start good."? Wow.
__________________
2002 2500 4x4 ETH/DEE-F1 Mach 5's/62/65/12/Smarty/ATS Ex.manifold/AFE intake/TST Comp./.020 marine gasket/o-ringed/ARP studs/5"stacks/Airdog 150/Isspro guages/Southbend 3600 DD/3.54 gears/leveling kit/Bilstein 5100frt,5150rr/37" BFG A/T's on 18" Eagle 114's/Borgeson SS/DSS
  Reply With Quote
Old 09-27-2019, 10:23 AM   #3
zachu812
 
zachu812's Avatar

Name: zachu812
Title: Too Much Time
Status: Not Here
Join Date: Apr 2016
Member`s Gallery
Posts: 270
What year is the truck? If it's an 01 or 02 you could advance the cam timing one tooth to get those 5* then just put an offset cam keyway in to put the cam back where it should be. That way the ECM doesn't know anything moved and you don't have to mess around with extra sensors.
__________________
2001 RCLB 4x4 auto
13mm, S472, 6x.013s
11.12 @ 120 & 6500lbs
  Reply With Quote
Old 09-27-2019, 11:05 AM   #4
Timbeaux
 
Timbeaux's Avatar

Name: Timbeaux
Title: Administrator and Head Thread Derailer
Status: Not Here
Join Date: Apr 2006
Location: Heart of Dixie
Member`s Gallery
Posts: 16,894
Jesus.
__________________
COMPETITIONDIESEL.COM
BRINGING THE BEST TOGETHER
F250(DD) ANOTHER TRUCK (PROGRAM)
NO LIMIT FAB, DIESEL SOUTH, DC CUSTOMS
Quote:
"I just love everything about racing. I wanna race every single day. Its nothing for me to be cutting grass and the neighbor hoss the gas on his mower, and there we are, lined up in the the middle of the street." - Stevie KillinTime Jackson
"Against stupidity, the gods themselves fight unvictorious."



  Reply With Quote
Old 09-27-2019, 11:26 AM   #5
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Zachu812 it’s a 01 and after sleeping on it that is 10* btdc on the crank! It runs great but slow starting.
  Reply With Quote
Old 09-27-2019, 11:35 AM   #6
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
I plan on running a adjustable pump gear and playing with different degrees!
  Reply With Quote
Old 12-07-2019, 09:05 PM   #7
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Well I’ve left this here awhile and mhuggler keep your thoughts to yourself if u don’t know what I have done and just want to fly off the mouth!

But I don’t see advancing the cam would move the tone ring either unless u jumped a tooth on crank and that’s ten degrees.

I tried to find a guys number tonight that advance it ten degrees with the industrial gears and he said he was a little over 800 hp and burnt all 6 pistons out, I would like to play with this in the future and maybe see if some of the higher hp vp would benefit from it but I think ten is too much on this engines!
  Reply With Quote
Old 12-07-2019, 09:46 PM   #8
mhuggler

Name: mhuggler
Title: One piece at a time
Status: Not Here
Join Date: Sep 2007
Location: Uno, Pa.
Member`s Gallery
Posts: 933
Quote:
Originally Posted by tinkertoy View Post
Well Iíve left this here awhile and mhuggler keep your thoughts to yourself if u donít know what I have done and just want to fly off the mouth!

But I donít see advancing the cam would move the tone ring either unless u jumped a tooth on crank and thatís ten degrees.

I tried to find a guys number tonight that advance it ten degrees with the industrial gears and he said he was a little over 800 hp and burnt all 6 pistons out, I would like to play with this in the future and maybe see if some of the higher hp vp would benefit from it but I think ten is too much on this engines!
I'm very familiar with the VP, but I'm also not disposed to assist someone that has clearly wasted tax dollars by sleeping through an available education. No matter what you state in your next post, you'll do it sounding like a complete moron.
__________________
2002 2500 4x4 ETH/DEE-F1 Mach 5's/62/65/12/Smarty/ATS Ex.manifold/AFE intake/TST Comp./.020 marine gasket/o-ringed/ARP studs/5"stacks/Airdog 150/Isspro guages/Southbend 3600 DD/3.54 gears/leveling kit/Bilstein 5100frt,5150rr/37" BFG A/T's on 18" Eagle 114's/Borgeson SS/DSS
  Reply With Quote
Old 12-07-2019, 10:11 PM   #9
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
So your one of those guys that think there cute behind a key board!!! Go away I don’t need your education either!

And I don’t care what u think
  Reply With Quote
Old 12-08-2019, 05:05 AM   #10
mhuggler

Name: mhuggler
Title: One piece at a time
Status: Not Here
Join Date: Sep 2007
Location: Uno, Pa.
Member`s Gallery
Posts: 933
Quote:
Originally Posted by tinkertoy View Post
So your one of those guys that think there cute behind a key board!!! Go away I don’t need your education either!

And I don’t care what u think
Much better! There's only a handful of mind-numbing moments in that one. Now we just need to introduce you to my friend, punctuation.
__________________
2002 2500 4x4 ETH/DEE-F1 Mach 5's/62/65/12/Smarty/ATS Ex.manifold/AFE intake/TST Comp./.020 marine gasket/o-ringed/ARP studs/5"stacks/Airdog 150/Isspro guages/Southbend 3600 DD/3.54 gears/leveling kit/Bilstein 5100frt,5150rr/37" BFG A/T's on 18" Eagle 114's/Borgeson SS/DSS

Last edited by mhuggler; 12-08-2019 at 05:08 AM.
  Reply With Quote
Old 12-08-2019, 11:25 AM   #11
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Buddy I’m not on here to go back to school for grammar, if u don’t like how I type don’t read it! And u act like your paying your taxes for this your ****ing crazy!!!! If u don’t think it’s Feasible that’s your opinion, kind of like putting a cam in it doesn’t give u 200hp on a mild build.

You crack me up and your a real tool!!!!
  Reply With Quote
Old 12-08-2019, 01:34 PM   #12
mhuggler

Name: mhuggler
Title: One piece at a time
Status: Not Here
Join Date: Sep 2007
Location: Uno, Pa.
Member`s Gallery
Posts: 933
__________________
2002 2500 4x4 ETH/DEE-F1 Mach 5's/62/65/12/Smarty/ATS Ex.manifold/AFE intake/TST Comp./.020 marine gasket/o-ringed/ARP studs/5"stacks/Airdog 150/Isspro guages/Southbend 3600 DD/3.54 gears/leveling kit/Bilstein 5100frt,5150rr/37" BFG A/T's on 18" Eagle 114's/Borgeson SS/DSS
  Reply With Quote
Old 12-08-2019, 02:06 PM   #13
monster50iii
 
monster50iii's Avatar

Name: monster50iii
Title: Diesel Enthusiast
Status: Not Here
Join Date: Oct 2011
Location: Medford, MN
Member`s Gallery
Posts: 140
mhuggler; theres no need to be a douche. If you cant help the guy, move on.
__________________
2003, 33.3"x13.5" pro comps, 5" straight pipe, smarty TNTr, , 06 head ported/polished, 100hpii, 60% cp3 TC diesel, studs, sb dd, airdog 165, SD 62 over 475, bd mani, springs, made 675.2hp and 1151ft lbs (kept spinning on rollers)
  Reply With Quote
Old 12-08-2019, 08:15 PM   #14
mhuggler

Name: mhuggler
Title: One piece at a time
Status: Not Here
Join Date: Sep 2007
Location: Uno, Pa.
Member`s Gallery
Posts: 933
Quote:
Originally Posted by monster50iii View Post
mhuggler; theres no need to be a douche. If you cant help the guy, move on.
It's ok. I'm done having my fun with Einstein.
__________________
2002 2500 4x4 ETH/DEE-F1 Mach 5's/62/65/12/Smarty/ATS Ex.manifold/AFE intake/TST Comp./.020 marine gasket/o-ringed/ARP studs/5"stacks/Airdog 150/Isspro guages/Southbend 3600 DD/3.54 gears/leveling kit/Bilstein 5100frt,5150rr/37" BFG A/T's on 18" Eagle 114's/Borgeson SS/DSS
  Reply With Quote
Old 12-08-2019, 09:19 PM   #15
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Yeah your cool you probably one these’s guys that has book smarts and can’t even put air in a tire!!!!! Lmao
  Reply With Quote
Old 12-08-2019, 09:35 PM   #16
jkretzer
 
jkretzer's Avatar

Name: jkretzer
Title: MegaCrank
Status: Not Here
Join Date: Jul 2006
Location: hunting, fishing or at work
Member`s Gallery
Posts: 1,437
I fear for the future of society
__________________
98 12v, DTT auto, ADT Motor, Mid-Atlantic Diesel Tuning and Twins. 62/13/s400

56 chevy shortbed restomod, 2wd, cummins 4bt,
nv4500.
  Reply With Quote
Old 12-08-2019, 09:42 PM   #17
RascalMafia
 
RascalMafia's Avatar

Name: RascalMafia
Title: heyyyyyyy girrrrrrrl
Status: Not Here
Join Date: Apr 2007
Location: McDonough, GA
Member`s Gallery
Posts: 4,817
Wow...

Sent from my SM-G960U using Tapatalk
__________________
'18 Chevy 2500
'14 Cruze Diesel - EFILive by Oz Tuner
'08 Corvette Z06 - Vengeance Racing H/C/I, 583 rwhp
'07 Kawasaki ZX10R - 175 rwhp


  Reply With Quote
Old 12-08-2019, 10:06 PM   #18
tinkertoy

Name: tinkertoy
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: eubank ky
Member`s Gallery
Posts: 420
Yeah fellows I apologize I normally don’t argue with haters Especially on grammar lol and sometimes I type quick and don’t look at it but Geez this guy! I thought this site was a site to help others not think your dicks bigger than mine kind of deal!!!
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:07 AM.

 


Powered by vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2020, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com