LOCATED IN SO CAL, LA AREA
Hey guys, I have a brand new short block that I put together as well as the head that came off the motor and a rebuilt head that was fire-ringed. I initially planned to build some sort of truck with a cummins swap but this is just taking up space right now. Everything was done right because I planned on keeping this.
You should be able to put together a sweet motor oil pan and almost all of the sheetmetal for the $4500 price.
Shortblock is .030 over.
New Mahle Pistons
FelPro Connecting Rod Bushings
New Wrist PIns
Common rail cracked rods
Clevite rod and main bearings
Hastings ring set
Felpro Gasket Set.
Cam and crank were both turned (I think the crank is .010 under)
Lifters were machined
squirters are installed
Oil pickup and stiffner installed
ARP 425 headstuds
2 heads, 1 was a runner
second was just brand new rebuilt and was cut for fire-rings.
Used oil pan
Used timing gear cover
used pushrods
used rockers and splitters
Used rockerbox, injector harness and valve cover
Used trans adapter
Used motor mounts
Used dipstick and tube
All the bolts
Not sure what else, but I am cleaning out!!!
There are doubles of some of this. It will be a good deal for someone who grenaded their motor. Pickup only or you arrange palletizing / shipping.
Text for fastest response, Tim 626-392-5855
Located in Claremont California, Los Angeles county
Hey guys, I have a brand new short block that I put together as well as the head that came off the motor and a rebuilt head that was fire-ringed. I initially planned to build some sort of truck with a cummins swap but this is just taking up space right now. Everything was done right because I planned on keeping this.
You should be able to put together a sweet motor oil pan and almost all of the sheetmetal for the $4500 price.
Shortblock is .030 over.
New Mahle Pistons
FelPro Connecting Rod Bushings
New Wrist PIns
Common rail cracked rods
Clevite rod and main bearings
Hastings ring set
Felpro Gasket Set.
Cam and crank were both turned (I think the crank is .010 under)
Lifters were machined
squirters are installed
Oil pickup and stiffner installed
ARP 425 headstuds
2 heads, 1 was a runner
second was just brand new rebuilt and was cut for fire-rings.
Used oil pan
Used timing gear cover
used pushrods
used rockers and splitters
Used rockerbox, injector harness and valve cover
Used trans adapter
Used motor mounts
Used dipstick and tube
All the bolts
Not sure what else, but I am cleaning out!!!
There are doubles of some of this. It will be a good deal for someone who grenaded their motor. Pickup only or you arrange palletizing / shipping.
Text for fastest response, Tim 626-392-5855
Located in Claremont California, Los Angeles county
