Craftsman Drawer Slides - Competition Diesel.Com

D45 · 03-13-2014, 05:59 PM

I bought this rolling box on CL for $100

I've never seen a locking 3 digit code roller before

All drawers are ball bearing and the casters are 6"x2" and a greaseable

For $100....its a good find!!!

Anyways, the bottom deep drawer needs a new ball bearing slide on the right side

The slide bracket is marked Accuride

Without having or knowing a model number or anything about this roller, where can I find or get a new slide assembly?

Bad slide:

Good slide:

Here is a pic of the left slide fully extended

Here is the broke slide

It is longer than 18" also, here is the left slide fully extended

The box is 42 1/4" tall x 33 1/2" wide

Accuride, Waterloo and Sears DO NOT make or sell a replacement slide for this drawer slide

Any ideas?

fairallbilt · 03-13-2014, 08:36 PM

Maybe you can just put hinges on the bottom drawer..I know it sounds stupid but I would be cheap and easy...does the drawers have a self latch?

jkretzer · 03-13-2014, 10:49 PM

Sears?

D45 · 03-14-2014, 08:10 PM

Quote:

Originally Posted by jkretzer

Sears?

Accuride, Waterloo and Sears DO NOT make or sell a replacement slide for this drawer slide

gwhammy · 03-15-2014, 06:46 AM

CabinetParts.com

jkretzer · 03-15-2014, 07:54 AM

I only mentioned that bc I was able to order a replacement from sears a few yrs ago.

Quote:

Originally Posted by D45

Accuride, Waterloo and Sears DO NOT make or sell a replacement slide for this drawer slide

torqueofthetown · 03-15-2014, 02:52 PM

Quote:

Originally Posted by D45

Accuride, Waterloo and Sears DO NOT make or sell a replacement slide for this drawer slide

Maybe a slide from another rollaway will work, or should I say be made to work
http://www.searspartsdirect.com/part...-storage-Parts

just an example, I have no idea if it will work
http://www.searspartsdirect.com/part...dMod=&keyId=15

D45 · 03-15-2014, 06:48 PM

Quote:

Originally Posted by gwhammy

CabinetParts.com

http://www.cabinetparts.com/f/drawer-slides

Thanks...... alot of options but I might find something that might work

D45 · 03-15-2014, 10:56 PM

The bottom drawer is 16" deep

Slides are 16" collapsed and 32 1/4" expanded

jeepxj97 · 03-16-2014, 12:40 AM

Lowes sells similar slides. They kind of look like the same slides that are on my snap on box

D45 · 03-16-2014, 09:25 AM

Thanks I'll swing by Lowes today and see

I know the current slides are pop riveted in to the roller chest...... so I'll have to drill them out and find a new way to mount the new slides

Self tapping screws?

*Chris Tobin* · 03-16-2014, 09:32 AM

Quote:

Originally Posted by D45

Thanks I'll swing by Lowes today and see

I know the current slides are pop riveted in to the roller chest...... so I'll have to drill them out and find a new way to mount the new slides

Self tapping screws?

Pop Rivets??? Stick with that...

gwhammy · 03-17-2014, 06:26 AM

McMaster has a large selection of slides also.

D45 · 03-17-2014, 10:22 AM

So you are suggesting to just drill out the pop rivets that secure the slides to the box and then pop rivet the new slides back in?

4x4dually · 03-17-2014, 10:57 AM

So, without reading all the posts, have you called and talked to Accuride? We put their slides in a butt load of US Navy racks and order them by the dozens. Surely to hell they have a part number that will work as a replacement. It looks like all the ones we get. You might just have one that extends over 2 inches, or 1 inch, or something a little different. Just replace both sides and call it good.

The only difference is probably the bent tab that mounts them. Just drill and us pop rivets.

D45 · 03-17-2014, 12:07 PM

Yes, Accuride told me the Craftsman slides were custom made for Sears' specs and there is not a replacement part slide

Accuride has been helpful with having 2-3 slide options, that will require slight modification........nothing they offer is a direct replacement

D45 · 03-17-2014, 12:21 PM

Here is what they suggest

"The pair in the link below is 1/2" thick and 100 lbs rated. View the tech sheets and compare to yours"

http://www.cabinetparts.com/p/accuri...lides-AC383216

*Chris Tobin* · 03-17-2014, 10:48 PM

Quote:

Originally Posted by D45

So you are suggesting to just drill out the pop rivets that secure the slides to the box and then pop rivet the new slides back in?

Yup. That should work fine...

D45 · 03-18-2014, 04:04 AM

The tech says the 3301 series is better weight rated than the 3832 series

D45 · 03-18-2014, 12:08 PM

I found another also, that has more weight load capacity:

Fulterer FR5210 Full Extension Slide 16" (#400172)
$20 a pair
200 pound rating

http://www.cabinetparts.com/p/fulter...s-FULFR521016/

Accuride Model 3301 series
$........CAN'T FIND THEM FOR SALE !
150 pounds

http://www.accuride.com/Resources/PDF/3301-r2-0802.pdf

http://www.accuride.com/Industrial/P...ndustrial-3301

03-13-2014, 05:59 PM	#1
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	Craftsman Drawer Slides I bought this rolling box on CL for $100 I've never seen a locking 3 digit code roller before All drawers are ball bearing and the casters are 6"x2" and a greaseable For $100....its a good find!!! Anyways, the bottom deep drawer needs a new ball bearing slide on the right side The slide bracket is marked Accuride Without having or knowing a model number or anything about this roller, where can I find or get a new slide assembly? Bad slide: Good slide: Here is a pic of the left slide fully extended Here is the broke slide It is longer than 18" also, here is the left slide fully extended The box is 42 1/4" tall x 33 1/2" wide Accuride, Waterloo and Sears DO NOT make or sell a replacement slide for this drawer slide Any ideas? __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-13-2014, 10:49 PM	#3
jkretzer Name: jkretzer Title: MegaCrank Status: Not Here Join Date: Jul 2006 Location: hunting, fishing or at work Member`s Gallery Posts: 1,444	Sears? __________________ 98 12v, DTT auto, ADT Motor, Mid-Atlantic Diesel Tuning and Twins. 62/13/s400 56 chevy shortbed restomod, 2wd, cummins 4bt, nv4500.

03-15-2014, 06:46 AM	#5
gwhammy Name: gwhammy Title: Too Much Time Status: Not Here Join Date: Sep 2006 Location: Missouri Member`s Gallery Posts: 2,201	CabinetParts.com __________________ 95,twd,rc,sb,351-ht60 twins,160modded, 09 f350 12 valve,

03-15-2014, 10:56 PM	#9
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	The bottom drawer is 16" deep Slides are 16" collapsed and 32 1/4" expanded __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-16-2014, 12:40 AM	#10
jeepxj97 Name: jeepxj97 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2013 Location: Summit Hill, PA Member`s Gallery Posts: 145	Lowes sells similar slides. They kind of look like the same slides that are on my snap on box __________________ 2004 QCLB daily driver 1997 ECLB "Green Goblin" KCCO

03-13-2014, 08:36 PM	#2
fairallbilt Name: fairallbilt Title: Too Much Time Status: Not Here Join Date: Jul 2013 Location: western maryland Member`s Gallery Posts: 325	Maybe you can just put hinges on the bottom drawer..I know it sounds stupid but I would be cheap and easy...does the drawers have a self latch?

03-16-2014, 09:25 AM	#11
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	Thanks I'll swing by Lowes today and see I know the current slides are pop riveted in to the roller chest...... so I'll have to drill them out and find a new way to mount the new slides Self tapping screws? __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-17-2014, 06:26 AM	#13
gwhammy Name: gwhammy Title: Too Much Time Status: Not Here Join Date: Sep 2006 Location: Missouri Member`s Gallery Posts: 2,201	McMaster has a large selection of slides also. __________________ 95,twd,rc,sb,351-ht60 twins,160modded, 09 f350 12 valve,

03-17-2014, 10:22 AM	#14
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	So you are suggesting to just drill out the pop rivets that secure the slides to the box and then pop rivet the new slides back in? __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-17-2014, 10:57 AM	#15
4x4dually Name: 4x4dually Title: Moderator Status: Not Here Join Date: Jan 2007 Location: Stillwater, OK Member`s Gallery Posts: 31,812	So, without reading all the posts, have you called and talked to Accuride? We put their slides in a butt load of US Navy racks and order them by the dozens. Surely to hell they have a part number that will work as a replacement. It looks like all the ones we get. You might just have one that extends over 2 inches, or 1 inch, or something a little different. Just replace both sides and call it good. The only difference is probably the bent tab that mounts them. Just drill and us pop rivets. __________________ Jory 2009 4x4 3500 MCLB "There are people far less intelligent than you making a living doing this stuff." - Jeff Mumau Last edited by 4x4dually; 03-17-2014 at 10:59 AM.

03-17-2014, 12:07 PM	#16
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	Yes, Accuride told me the Craftsman slides were custom made for Sears' specs and there is not a replacement part slide Accuride has been helpful with having 2-3 slide options, that will require slight modification........nothing they offer is a direct replacement __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-17-2014, 12:21 PM	#17
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	Here is what they suggest "The pair in the link below is 1/2" thick and 100 lbs rated. View the tech sheets and compare to yours" http://www.cabinetparts.com/p/accuri...lides-AC383216 __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-18-2014, 04:04 AM	#19
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	The tech says the 3301 series is better weight rated than the 3832 series __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans

03-18-2014, 12:08 PM	#20
D45 Name: D45 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Indiana Member`s Gallery Posts: 1,685	I found another also, that has more weight load capacity: Fulterer FR5210 Full Extension Slide 16" (#400172) $20 a pair 200 pound rating http://www.cabinetparts.com/p/fulter...s-FULFR521016/ Accuride Model 3301 series $........CAN'T FIND THEM FOR SALE ! 150 pounds http://www.accuride.com/Resources/PDF/3301-r2-0802.pdf http://www.accuride.com/Industrial/P...ndustrial-3301 __________________ 04, 20" BMF SOTA/37" Toyo MT, 6" Lift, MBRP 5", GDP Air Boss, GDP Power-Flow, GDP Grid Delete, IceBox Intake, Air Dog 150, ATS Pulse Flow Manifold, BD Special, SMARTY, ARP Studs, T&C WILD Fuel Rail, T&C CPRV, II 85% CP3, II 100HP Nozzles, Built 48RE Trans