Lots of 12v Engine Odds and Ends - Competition Diesel.Com

jhastings · 05-03-2018, 09:50 PM

Updated as of 30 DEC 17:
All parts removed from either a 98' 12v or 94' 12v

Bigger items:
-HX-35 w/ 14cm WG housing Banks Big Head actuator $400
-WH1C turbo with 12cm WG housing $100
-Timing Cover Housing (KDP jig installed) $75
-Timing housing cover $40
-Fan with fan clutch $200
-P7100 Injection pump gear $90
-Stock valve springs $10
-Cam Gear $100
-6x valve covers (1 with oil filler) $100
-AC compressor $25
-Tappet Cover $40

Smaller Items:
-P7100 Injection pump to block mount $40
-Stock fuel heater assembly $30
-Random Hard Fuel lines $10/each
-Canister style fuel filter housing and water in fuel sensor $30
-Turbo drain pipe $20
-Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there)
-12v full set of used stock tappets (1 needs resurface) $15
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $30
-Oil pan oil pickup rear sump $25
-Fan pulley and fan hub $25
-Rear main seal housing $25
-Cam retainer plate $35
-Rear lifting ring bracket $10
-Stock 98 12v clutch hydraulics (worked well when removed) $20
-6x12v injector hold down nuts $20
-Stock used tensioner $5
-Rigid AFC to Wastegate line $5
-Cold pipe clamp $5
-v-Band clamp $10
-Oil pump $20
-Battery hold down bolts $5
-Oil fillers with cap $10

If you see something in the pics not listed, let me know.
All prices are firm unless you combine items then its OBO!

Please text me at (805)610-9254 as it is tougher for me to answer PM's

All payments PayPal to jameshhastings@gmail.com
Shipping is mostly through USPS as cheap as possible. Thanks!

jhastings · 05-03-2018, 10:09 PM

IMG_0022.jpg IMG_0023.jpg IMG_0024.jpg

Sent from my iPad using Tapatalk

jhastings · 05-03-2018, 10:13 PM

IMG_0025.jpg IMG_0026.jpg IMG_0028.jpg IMG_0027.jpg IMG_0029.jpg

Sent from my iPad using Tapatalk

weazel · 05-03-2018, 10:48 PM

Subbing..

Kryp2nitE · 05-03-2018, 11:03 PM

I’ll take one of the oil filler tubes. Price shipped to 92104?

Sent from my iPhone using Tapatalk

ctdthrasher · 05-04-2018, 08:53 AM

Front gear case in good shape? No previous KDP issues? Price to ship it and the p7100 gear to 98295 please if it’s never been cracked or repaired.
Thanks

jhastings · 05-04-2018, 10:44 AM

Quote:

Originally Posted by Kryp2nitE

I’ll take one of the oil filler tubes. Price shipped to 92104?

Sent from my iPhone using Tapatalk

It’ll be flat rate. Expect price plus $6-$13 shipped. I’ll be going to USPS this morning. Text me at 805-610-9254 with complete address.

Jamie

Sent from my iPad using Tapatalk

jhastings · 05-04-2018, 03:38 PM

Timing case, oil pump, oil filler neck, and p-pump mount sold. All else including pump gear available

Sent from my iPad using Tapatalk

jhastings · 05-14-2018, 07:40 PM

Bump. Bring offers. Need to get this stuff gone. Located Battle Ground WA. Can ship most anything. Please text me for best response. 805-610-9254

Jamie

Sent from my iPad using Tapatalk

jhastings · 05-18-2018, 01:29 PM

Updated as of 18 MAY 2018: Bring offers
All parts removed from either a 98' 12v or 94' 12v

Bigger items:
-HX-35 w/ 14cm WG housing Banks Big Head actuator $400
-Timing housing cover $40
-Fan with fan clutch $200
-P7100 Injection pump gear $90
-Stock valve springs $10
-Cam Gear $100
-6x valve covers $100
-AC compressor $25
-Tappet Cover $40

Smaller Items:
-P7100 Injection pump to block mount $40
-Stock fuel heater assembly $30
-Random Hard Fuel lines $10/each
-Canister style fuel filter housing and water in fuel sensor $30
-Turbo drain pipe $20
-Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there)
-12v full set of used stock tappets (1 needs resurface) $15
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-2x 12v stock exhaust manifolds tapped for probes $30 each
-Both hard heater lines $30
-Oil pan oil pickup rear sump $25
-Fan pulley and fan hub $25
-Rear main seal housing $25
-Cam retainer plate $35
-Rear lifting ring bracket $10
-Stock 98 12v clutch hydraulics (worked well when removed) $20
-6x12v injector hold down nuts $20
-Rigid AFC to Wastegate line $5
-Cold pipe clamp $5
-v-Band clamp $10
-Battery hold down bolts $5
-Oil filler base $10

If you see something in the pics not listed, let me know.
All prices are OBO

Please text me at (805)610-9254 as it is tougher for me to answer PM's

All payments PayPal to jameshhastings@gmail.com
Shipping is mostly through USPS as cheap as possible. Thanks!

05-03-2018, 09:50 PM	#1
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	Lots of 12v Engine Odds and Ends Updated as of 30 DEC 17: All parts removed from either a 98' 12v or 94' 12v Bigger items: -HX-35 w/ 14cm WG housing Banks Big Head actuator $400 -WH1C turbo with 12cm WG housing $100 -Timing Cover Housing (KDP jig installed) $75 -Timing housing cover $40 -Fan with fan clutch $200 -P7100 Injection pump gear $90 -Stock valve springs $10 -Cam Gear $100 -6x valve covers (1 with oil filler) $100 -AC compressor $25 -Tappet Cover $40 Smaller Items: -P7100 Injection pump to block mount $40 -Stock fuel heater assembly $30 -Random Hard Fuel lines $10/each -Canister style fuel filter housing and water in fuel sensor $30 -Turbo drain pipe $20 -Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there) -12v full set of used stock tappets (1 needs resurface) $15 -Stock lifter rods $30 -6x Rocker pedestals and rocker arms $100 -2x 12v stock exhaust manifolds tapped for probes $40 each -Both hard heater lines $30 -Oil pan oil pickup rear sump $25 -Fan pulley and fan hub $25 -Rear main seal housing $25 -Cam retainer plate $35 -Rear lifting ring bracket $10 -Stock 98 12v clutch hydraulics (worked well when removed) $20 -6x12v injector hold down nuts $20 -Stock used tensioner $5 -Rigid AFC to Wastegate line $5 -Cold pipe clamp $5 -v-Band clamp $10 -Oil pump $20 -Battery hold down bolts $5 -Oil fillers with cap $10 If you see something in the pics not listed, let me know. All prices are firm unless you combine items then its OBO! Please text me at (805)610-9254 as it is tougher for me to answer PM's All payments PayPal to jameshhastings@gmail.com Shipping is mostly through USPS as cheap as possible. Thanks! __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.

05-03-2018, 10:09 PM	#2
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	IMG_0022.jpg IMG_0023.jpg IMG_0024.jpg Sent from my iPad using Tapatalk __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.

05-03-2018, 10:13 PM	#3
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	IMG_0025.jpg IMG_0026.jpg IMG_0028.jpg IMG_0027.jpg IMG_0029.jpg Sent from my iPad using Tapatalk __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.

05-03-2018, 10:48 PM	#4
weazel Name: weazel Title: 5th gear killer Status: Not Here Join Date: May 2008 Location: Mason, TX Member`s Gallery Posts: 2,252	Subbing.. __________________ 88 Chevy Half Ton/ LB7 conversion 08 Chevy 3500HD, efi, 5” exhaust

05-03-2018, 11:03 PM	#5
Kryp2nitE Name: Kryp2nitE Title: Green Behind the Ears Status: Not Here Join Date: Oct 2012 Location: San Diego, CA Member`s Gallery Posts: 64	I’ll take one of the oil filler tubes. Price shipped to 92104? Sent from my iPhone using Tapatalk __________________ 95 2WD HE351/BHT3B twins, OFV060HP, Built 47RH, Airdog 150, 18* Timing, AFC Live Stage 2

05-04-2018, 08:53 AM	#6
ctdthrasher Name: ctdthrasher Title: Green Behind the Ears Status: Not Here Join Date: Feb 2015 Member`s Gallery Posts: 77	Front gear case in good shape? No previous KDP issues? Price to ship it and the p7100 gear to 98295 please if it’s never been cracked or repaired. Thanks __________________ 98 12V quad cab. PDD 5x14s and 025. 63/68/.83 13.06@103. need more fuel....and air....and fuel

05-04-2018, 03:38 PM	#8
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	Timing case, oil pump, oil filler neck, and p-pump mount sold. All else including pump gear available Sent from my iPad using Tapatalk __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.

05-14-2018, 07:40 PM	#9
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	Bump. Bring offers. Need to get this stuff gone. Located Battle Ground WA. Can ship most anything. Please text me for best response. 805-610-9254 Jamie Sent from my iPad using Tapatalk __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.

05-18-2018, 01:29 PM	#10
jhastings Name: jhastings Title: Diesel Enthusiast Status: Not Here Join Date: May 2011 Member`s Gallery Posts: 129	Updated as of 18 MAY 2018: Bring offers All parts removed from either a 98' 12v or 94' 12v Bigger items: -HX-35 w/ 14cm WG housing Banks Big Head actuator $400 -Timing housing cover $40 -Fan with fan clutch $200 -P7100 Injection pump gear $90 -Stock valve springs $10 -Cam Gear $100 -6x valve covers $100 -AC compressor $25 -Tappet Cover $40 Smaller Items: -P7100 Injection pump to block mount $40 -Stock fuel heater assembly $30 -Random Hard Fuel lines $10/each -Canister style fuel filter housing and water in fuel sensor $30 -Turbo drain pipe $20 -Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there) -12v full set of used stock tappets (1 needs resurface) $15 -Stock lifter rods $30 -6x Rocker pedestals and rocker arms $100 -2x 12v stock exhaust manifolds tapped for probes $30 each -Both hard heater lines $30 -Oil pan oil pickup rear sump $25 -Fan pulley and fan hub $25 -Rear main seal housing $25 -Cam retainer plate $35 -Rear lifting ring bracket $10 -Stock 98 12v clutch hydraulics (worked well when removed) $20 -6x12v injector hold down nuts $20 -Rigid AFC to Wastegate line $5 -Cold pipe clamp $5 -v-Band clamp $10 -Battery hold down bolts $5 -Oil filler base $10 If you see something in the pics not listed, let me know. All prices are OBO Please text me at (805)610-9254 as it is tougher for me to answer PM's All payments PayPal to jameshhastings@gmail.com Shipping is mostly through USPS as cheap as possible. Thanks! __________________ 1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.