Kubitza123
New member
Built LB7 long block and full billet 5spd in TX FS
Only trades would be a fully built auto 4l80e 4wd trans , 540-632 BBC setup for pump gas or LSX 454.
Ok now that that’s out of the way the trans has around 5,000 miles with a stock tuned motor. Evan at Limitless can verify parts bought and I have invoices as well for everything. Out of a 2004 LB7 4x4
Has the following:
Billet input shaft
Billet output shaft
Billet intermediate shaft
Billet C2
Billet planetary
PPE deep pan
PPE trans/tcase brace
Suncoast/Limitless 1078 converter
Limitless trans kit
New OEM Allison pump
New OEM Allison Valve body with mods from the kit
Maybe more just can’t think of it at the moment but has best of the best.
Located in central Tx near Waco can ship on buyers dime.
$6500
Long block has the following:
SoCal push rods
SoCal springs, retainers and keepers
SoCal stage 2 AF cam Nee
ATI dampner
SoCal flex plate
ARP main studs
ARP rocker studs
ARP head studs
New rod and main bearings
New rings
Mahle race cast pistons 16.1 with reliefs .020
Carrillo rods
New crank keyed
Rotating assembly balanced
Fresh bore and hone
Half filled block
Ported heads
Screw in injector cups
Pro fab up pipes and manifolds
Maybe more all I can think of at the moment. Pistons , rods, crank have 8 pulls on them before Jim owner of Baillie Diesel pulled them from the filled block and built this for me . He can backup the build etc.
$9000 pickup can ship on buyers dime.
254-275-7335 Mark with any questions and cansend pics
Only trades would be a fully built auto 4l80e 4wd trans , 540-632 BBC setup for pump gas or LSX 454.
Ok now that that’s out of the way the trans has around 5,000 miles with a stock tuned motor. Evan at Limitless can verify parts bought and I have invoices as well for everything. Out of a 2004 LB7 4x4
Has the following:
Billet input shaft
Billet output shaft
Billet intermediate shaft
Billet C2
Billet planetary
PPE deep pan
PPE trans/tcase brace
Suncoast/Limitless 1078 converter
Limitless trans kit
New OEM Allison pump
New OEM Allison Valve body with mods from the kit
Maybe more just can’t think of it at the moment but has best of the best.
Located in central Tx near Waco can ship on buyers dime.
$6500
Long block has the following:
SoCal push rods
SoCal springs, retainers and keepers
SoCal stage 2 AF cam Nee
ATI dampner
SoCal flex plate
ARP main studs
ARP rocker studs
ARP head studs
New rod and main bearings
New rings
Mahle race cast pistons 16.1 with reliefs .020
Carrillo rods
New crank keyed
Rotating assembly balanced
Fresh bore and hone
Half filled block
Ported heads
Screw in injector cups
Pro fab up pipes and manifolds
Maybe more all I can think of at the moment. Pistons , rods, crank have 8 pulls on them before Jim owner of Baillie Diesel pulled them from the filled block and built this for me . He can backup the build etc.
$9000 pickup can ship on buyers dime.
254-275-7335 Mark with any questions and cansend pics