FOR SALE 1996 cummins with twins - Competition Diesel.Com

holmesfarm · 12-29-2009, 11:29 PM

I have a 1996 cummins i bought a couple months ago off a guy in arizona and barely even drove it 20 miles. I bought the truck and got home with it and drove it to town and back and noticed it had oil in the antifreeze so parked it and havent had the money to fix it. Everyone has told me it needs a new oil cooler or a head gasket. The wiring on the truck doesnt look the greatest and the gauges need rewired. The truck doesnt have any back seats or front drive shaft or the nitrous lines or front and rear bumpers and needs exhaust. I was told when i bought the truck he would bring them with him when i met him in texas but then when i met him he "forgot" them and told me he would ship them but tried to call him and never heard from the dumb*** again. Im going to be completely honest i dont know much about the truck and im going to paste below what he said was done to the truck on ebay. The truck ran good when i drove it and im not goin to have the money to fix it or repaint it like i was wanting to so my loss your gain. I have around $9200 in the truck after i put new fuel tank straps on it, new clear headlights with blue bulbs. I know its not worth that but i want to try and get what i can out of it without loosing a bunch of money. The tires are about 80% and he said it has like a 4 inch lift and air bags in the rear. email me with any questions and i can haul it for fuel money within 8 hrs from zip code 64455. Like i said i dont hardly know anything about the truck and im not a mechanic so dont ask me a bunch of stuff about it. There is no rust on the truck just some dents need fixed and some new paint. I pasted what he said was done to it on ebay below........

This is a 96 dodge with one hell of a motor and tranny in it. the motor i built myself. The motor only has 7k on it. It has stock pistons that have been cut and coated. Custom cam and valves. Fire ringed head and block. 12mm studs. The has been ported. Custom injection pump that runs 13mm plunger and has a set of 5-13 injectors. One the dyno made 783hp and 1491tq. That was on motor and it has a stage of nitrous. Which has never been used. And the turbos are a s364 and a bell 8980. Which they are a 64mm and a 80mm turbos. It also has a 60mm external wastegate. In the picture i took the truck has a single on it but i am putting the twins back on. Will have pictures up soon of the twins. The tranny is full billet. Hard shaft all the way and the converter also. The tranny was just gone throught 10/5/09. All new clutches were put in and a different valve body was put in for racing. The coverter was just gone through also and a lower stall was done.The front diff is a dana 60 that is open but has full axels insted of the factory 2 piece. For the steering i have done away with factory and did DOM with heims. The front suspension is custom also. I did long arms that are made of 2" DOM with poly bushings and smooth ride coils. The rear is a dana 80 that has a posi. The body is a little rought. I got hit in the truck by someone who had not insurance. The body work was all done and just never got the truck painted. Thats all the truck needs is paint

holmesfarm · 12-29-2009, 11:33 PM

$9000 obo

holmesfarm · 12-29-2009, 11:41 PM

holmesfarm · 12-29-2009, 11:44 PM

http://photos-h.ak.fbcdn.net/hphotos..._3513779_n.jpg[IMG]

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs199.snc3/20650_219195696919_501721919_3594280_5710030_n.jpg[/IMG]

ZJARCHER · 12-30-2009, 01:55 AM

Bump for a good guy... Help him out! Truck has a lotttt of potential, sucks that you got dooped out of stuff by that dude, man...

holmesfarm · 12-30-2009, 02:58 AM

thanks! I wish i could of bought yours but im glad you got it sold

holmesfarm · 12-30-2009, 10:47 AM

$8000 cash takes it. I need it sold by january 5th so i can pay off some bills

Turner5.9 · 12-30-2009, 11:37 AM

what r the to turbos

holmesfarm · 12-30-2009, 11:46 AM

turbos are a s364 and a bell 8980. Which they are a 64mm and a 80mm turbos

wwm · 12-30-2009, 12:25 PM

one badarse truck

holmesfarm · 12-30-2009, 05:27 PM

doesnt someone want a good deal????

03powermax · 12-30-2009, 06:45 PM

man i wish i could take it!! sounds like a good truck!! i need to sell mine!! 03 lb7 158???k good mods runs great! hope you can find a buyer!!

ole red rocket · 12-30-2009, 07:46 PM

did it seem to act like a built truck

scott2001 · 12-30-2009, 08:08 PM

sounds like someone needs to take a trip to texas, i would put that in my next trip, but thats just me

Flyintaco138 · 12-30-2009, 09:08 PM

Trades???

holmesfarm · 12-31-2009, 06:19 PM

what do you have? Id really like to just sell it so i can pay off my bills but i am looking for a cummins for my gf that she could drive back and forth to college. what do you have?

Quote:

Originally Posted by Flyintaco138

Trades???

jaybrown · 12-31-2009, 06:31 PM

curits, do you happen to have a hood and hinges for a 1996?

holmesfarm · 12-31-2009, 06:35 PM

nope i gave my last hood away that fit a 96 and my buddy had one but he left it down in st louis cause we had no room to fit it in the bed last week. sorry

Quote:

Originally Posted by jaybrown

curits, do you happen to have a hood and hinges for a 1996?

Turner5.9 · 01-01-2010, 04:51 PM

i will gave u 5000 not train to but a smartass i just don't know for sure what is wrong with it or how it runs

holmesfarm · 01-01-2010, 05:45 PM

u can buy the transmission and twin for $5000

Quote:

Originally Posted by Turner5.9

i will gave u 5000 not train to but a smartass i just don't know for sure what is wrong with it or how it runs

12-29-2009, 11:29 PM	#1
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	FOR SALE 1996 cummins with twins I have a 1996 cummins i bought a couple months ago off a guy in arizona and barely even drove it 20 miles. I bought the truck and got home with it and drove it to town and back and noticed it had oil in the antifreeze so parked it and havent had the money to fix it. Everyone has told me it needs a new oil cooler or a head gasket. The wiring on the truck doesnt look the greatest and the gauges need rewired. The truck doesnt have any back seats or front drive shaft or the nitrous lines or front and rear bumpers and needs exhaust. I was told when i bought the truck he would bring them with him when i met him in texas but then when i met him he "forgot" them and told me he would ship them but tried to call him and never heard from the dumb*** again. Im going to be completely honest i dont know much about the truck and im going to paste below what he said was done to the truck on ebay. The truck ran good when i drove it and im not goin to have the money to fix it or repaint it like i was wanting to so my loss your gain. I have around $9200 in the truck after i put new fuel tank straps on it, new clear headlights with blue bulbs. I know its not worth that but i want to try and get what i can out of it without loosing a bunch of money. The tires are about 80% and he said it has like a 4 inch lift and air bags in the rear. email me with any questions and i can haul it for fuel money within 8 hrs from zip code 64455. Like i said i dont hardly know anything about the truck and im not a mechanic so dont ask me a bunch of stuff about it. There is no rust on the truck just some dents need fixed and some new paint. I pasted what he said was done to it on ebay below........ This is a 96 dodge with one hell of a motor and tranny in it. the motor i built myself. The motor only has 7k on it. It has stock pistons that have been cut and coated. Custom cam and valves. Fire ringed head and block. 12mm studs. The has been ported. Custom injection pump that runs 13mm plunger and has a set of 5-13 injectors. One the dyno made 783hp and 1491tq. That was on motor and it has a stage of nitrous. Which has never been used. And the turbos are a s364 and a bell 8980. Which they are a 64mm and a 80mm turbos. It also has a 60mm external wastegate. In the picture i took the truck has a single on it but i am putting the twins back on. Will have pictures up soon of the twins. The tranny is full billet. Hard shaft all the way and the converter also. The tranny was just gone throught 10/5/09. All new clutches were put in and a different valve body was put in for racing. The coverter was just gone through also and a lower stall was done.The front diff is a dana 60 that is open but has full axels insted of the factory 2 piece. For the steering i have done away with factory and did DOM with heims. The front suspension is custom also. I did long arms that are made of 2" DOM with poly bushings and smooth ride coils. The rear is a dana 80 that has a posi. The body is a little rought. I got hit in the truck by someone who had not insurance. The body work was all done and just never got the truck painted. Thats all the truck needs is paint

12-30-2009, 12:25 PM	#10
wwm Name: wwm Title: TO MANY TRUCKS Status: Not Here Join Date: Mar 2009 Location: texas Member`s Gallery Posts: 801	one badarse truck __________________ 06 CTD 4X4 2" Thuren, 35"s, ATP EFI Tuning, Firepunk Trans, Fass 150, Flux 4's, PPE dual feeders, springs, studs and twins (Steed mani, Tial wastegate and 62 over 80. 94 rclb no plate, 4ks, FC's, afc mods, Mack plug, Mack 64mm turbo, gauges, metal dash, 5" stacks

12-30-2009, 06:45 PM	#12
03powermax Name: 03powermax Title: Green Behind the Ears Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 46	man i wish i could take it!! sounds like a good truck!! i need to sell mine!! 03 lb7 158???k good mods runs great! hope you can find a buyer!! __________________ Ride..03 2500hd gmc Upgrades... Cobolt gauges...Boost..pyro..tranny! 7'' black stack, PPE Boost valve, PPE hot+2, PPE TR Sleeves, FASS 150/150, Bilstein shocks on all 4 corners, stage 5 PPE trans!! 295/75/16 hankook M/T,Offroad Eagle Alloys, AMSOIL Fluid!!

12-29-2009, 11:33 PM	#2
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	$9000 obo

12-29-2009, 11:41 PM	#3
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510

12-29-2009, 11:44 PM	#4
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	http://photos-h.ak.fbcdn.net/hphotos..._3513779_n.jpg[IMG] http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs199.snc3/20650_219195696919_501721919_3594280_5710030_n.jpg[/IMG]

12-30-2009, 01:55 AM	#5
ZJARCHER Name: ZJARCHER Title: Too Much Time Status: Not Here Join Date: Jan 2008 Location: Amazing Arizona Member`s Gallery Posts: 361	Bump for a good guy... Help him out! Truck has a lotttt of potential, sucks that you got dooped out of stuff by that dude, man...

12-30-2009, 02:58 AM	#6
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	thanks! I wish i could of bought yours but im glad you got it sold

12-30-2009, 10:47 AM	#7
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	$8000 cash takes it. I need it sold by january 5th so i can pay off some bills

12-30-2009, 11:37 AM	#8
Turner5.9 Name: Turner5.9 Title: Banned Status: Not Here Join Date: Nov 2009 Member`s Gallery Posts: 121	what r the to turbos

12-30-2009, 11:46 AM	#9
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	turbos are a s364 and a bell 8980. Which they are a 64mm and a 80mm turbos

12-30-2009, 05:27 PM	#11
holmesfarm Name: holmesfarm Title: Banned Status: Not Here Join Date: Sep 2009 Member`s Gallery Posts: 510	doesnt someone want a good deal????

12-30-2009, 07:46 PM	#13
ole red rocket Name: ole red rocket Title: Too Much Time Status: Not Here Join Date: Mar 2009 Location: Sumner, Il Member`s Gallery Posts: 523	did it seem to act like a built truck

12-30-2009, 08:08 PM	#14
scott2001 Name: scott2001 Title: Its never fast enough Status: Not Here Join Date: Oct 2008 Location: Alabama Member`s Gallery Posts: 1,800	sounds like someone needs to take a trip to texas, i would put that in my next trip, but thats just me

12-30-2009, 09:08 PM	#15
Flyintaco138 Name: Flyintaco138 Title: Diesel Freak Status: Not Here Join Date: Nov 2008 Member`s Gallery Posts: 182	Trades???

12-31-2009, 06:31 PM	#17
jaybrown Name: jaybrown Title: Diesel Enthusiast Status: Not Here Join Date: Oct 2009 Location: nw missouri Member`s Gallery Posts: 106	curits, do you happen to have a hood and hinges for a 1996?

01-01-2010, 04:51 PM	#19
Turner5.9 Name: Turner5.9 Title: Banned Status: Not Here Join Date: Nov 2009 Member`s Gallery Posts: 121	i will gave u 5000 not train to but a smartass i just don't know for sure what is wrong with it or how it runs