01 P-Pumped 24v - Competition Diesel.Com

01Zip24v · 03-09-2014, 05:25 PM

I read a lot on here but do not post all that much. Here are just a few pictures of my truck. The P-pump swap was done at East Coast Diesel. Swap was done very nice, just took a little longer than I expected. When I got it back there were full cut delivery valves in the pump. I was hitting 1800 degrees WOT. I ended up putting in a set of 191 Delivery valves per Dan at R&R Services. I am not only hitting 1200 degrees at WOT and that is without my water turned on. Overall I am very happy with the truck, future plans are this summer to pull the motor and do rod and main bearings and Id like to start modifying to start 2.6 sled pulling.

Truckatdodge_zpsf4052cda.jpg Photo by Onethree37 \| Photobucket

IMAG0320_zpsc92226b4.jpg Photo by Onethree37 \| Photobucket

IMAG0319_zpsf1ad5b41.jpg Photo by Onethree37 \| Photobucket

IMAG0319_zpsf1ad5b41.jpg Photo by Onethree37 \| Photobucket

IMAG0317_zps268cb4ea.jpg Photo by Onethree37 \| Photobucket

photo14.jpg Photo by Onethree37 \| Photobucket

DSC_6375_zps3c755bdf.jpg Photo by Onethree37 \| Photobucket

DSC_6379_zpsa2bcd327.jpg Photo by Onethree37 \| Photobucket

DSC_6351_zps7b57a3b0.jpg Photo by Onethree37 \| Photobucket

DSC_6284_zps253b4abd.jpg Photo by Onethree37 \| Photobucket

photo18_zps24b7f62e.jpg Photo by Onethree37 \| Photobucket

photo22_zps5d8cf5f0.jpg Photo by Onethree37 \| Photobucket