Well time to make some changes and get this thing out of my driveway I never use it and I’m washed up.
-Rolling chassis has a clean title I’m 2nd owner and it only has 115k miles on it. Body is beat up but no rust, has fuel cell, traction bars, afco coil overs, bilstein shocks up front, new tie rods and drag link, new trac bar bushings, sparco racing seats, sparco steering wheel, 15gal fuel cell, etc. Truck is pretty much a street truck.. $make offer
- long block is a almost brand new engine built by steve burton @new performance auto. It has maybe 100 street miles and 6 passes. It started as a 2017 6.7 cummins block with 4K miles. Sleeved the motor down to .20 5.9L. 03-04 qsb coated pistons, Carrillo hd rods with carr bolts, 188/220 cam, custom
Main gurdle, 9/16” main studs, 9/16” head studs, all cam bearings etc. has a ported/blended head, inconnel valves, side draft intake, manton conical valve springs, block and head fire ringed,tool steel manton tappets, balancer with full power kit etc . -17k obo
-manton roller rocker arms, like new. Best you can get. Arp adjuster nuts, trunions and bridges. 3k obo
- manton 1/2”series 5 push rods -$300 obo
-exergy 350% over 03-04 injectors with body mods. $3500 obo no cores needed less than 3k on them.
- exergy 12mm cp3. 0 miles on it just bolted in place. $1900 obo
- ii dual cp3 kit with 30% lbz pump. $1800 obo
-fleece distribution block with lines and fittings and fuel psi gauge. - sold
- s480/96/1.25 t4 over a gt55 based 108mm with a stainless steel v band turbine housing 108/112/1.29 ar. Compound kit built by Riley at evil fab. Complete manifold to down pipe. Bolt on run 9s. $6,000 obo
- built 48re trans, built by Dennis @duro transmission, has a new FTI triple disc converter made to fit the dpc fat input shaft. Trans is brand new re-freshed. Valve body is still at Muldoon getting checked before sale. Fat dpc input, sonnax intermediate, sonax output, sfi flywheel. Has almost all the goodies, held 1300 hp for me. $6,000 obo 1 year transferable warranty on workmanship with 1k or less hp. Will sell transfer case also.
- fass 290 gph pump. Almost brand new.. $750
-smeding intercooler $650
Pusher intake hon and driver side I/c pipe $300
I’ll start with this, radials are going, etc. would like to move some big ticket items first. And Go!!
**Have pics upon request, would like to make a deal on engine and trans first**
Sent from my iPhone using Tapatalk
04 DODGE,H/P TUNER,BULLSEYE TURBO,FASS,BUILT 48 RE TRANNY,35"NITTO'S AND 35" STS FOR PULLING,CHROME STACKS,MANY HOMEMADE ITEMS-THANKS MASS DIESEL FOR ALL YOUR SUPPORT!
