Letter to EPA from ATS - Page 3 - Competition Diesel.Com

MMAguy · 12-15-2008, 08:18 PM

Quote:

Originally Posted by J.Keith

Please, whoever has this info on good credit let me know via PM.

I'm in CO, about an hour north of ATS and I have had WAY to much to do with them this year. They are heavily involved in the new pulling organization that started last year and I am SHOCKED that they would make a move like this. So, I need to know this info is good because if it is I am calling and pulling out of the NSPA tomorrow. I will not be a part of this kind of backstabbing bullchit that is just the latest in a long string of reasons why I think they are scumbags.

Thanks
Jeremy

I commend you, there's no need for back stabbing antics, we all know the economy is in the ****ter but that low...

RickFox · 12-15-2008, 08:19 PM

WOW! That is all I can say is WOW!

Rick

J.Keith · 12-15-2008, 08:20 PM

Well, it hurts a bit as the NSPA is the only organization around here that I can pull with. But damn, I wouldn't be able to keep from making an issue about it.

*Toolman* · 12-15-2008, 08:22 PM

Kind of sounds like PDI was getting into ATS'S briches a little with their manifolds and stuff and they have an ax to grind. The problem is they are going to put a finger on all of us because of it .

mudder500 · 12-15-2008, 08:23 PM

Someone should post this on dtr and see how long it takes to get banned. Im sure larry wouldnt like it.

Luken · 12-15-2008, 08:25 PM

Is anyone from ATS a member on CompD?

zstroken · 12-15-2008, 08:32 PM

Quote:

Originally Posted by mudder500

Someone should post this on dtr and see how long it takes to get banned. Im sure larry wouldnt like it.

I would, but I am already banned.

MAXTORQ · 12-15-2008, 08:34 PM

Can't tell you how many times I get compared to those guys. And my shop is two minutes from theirs.

I often get asked " Do you guys do the same thing those guys do"?

My answer is NO as I give a do give a rats A$$ about my customers.

The article does not surprise me however.

W1cked · 12-15-2008, 08:34 PM

Does not surprise me at all. The guys at ATS screwed me on my first tranny.
I bought a full billet tranny from them that lasted a whooping four hours before it melted.
When i opened the tranny the only billet part in it was the input shaft.
These guys have been on my sh@t list since i got into the sport.

Mike D · 12-15-2008, 08:39 PM

Holy crap.

Copied and saved to hard drive...

MAXTORQ · 12-15-2008, 08:40 PM

Quote:

Originally Posted by W1cked

Does not surprise me at all. The guys at ATS screwed me on my first tranny.
I bought a full billet tranny from them that lasted a whooping four hours before it melted.
When i opened the tranny the only billet part in it was the input shaft.
These guys have been on my sh@t list since i got into the sport.

And your not the first person to see this either.

malibu795 · 12-15-2008, 08:41 PM

Quote:

Originally Posted by 06 DIESEL

If this is true ATS has alot of explaining to do, and fast. When I see concrete proof of said letter I will make up my mind, but for now it does not look good for them.

if this was publicly filded freedom of Info act and you can get it.

is cable the guy that bailed clint out of a ~10m lawsuit for trannies? i had just seen that some were dont quote me on that i woud like to know

mudder500 · 12-15-2008, 08:48 PM

Quote:

Originally Posted by zstroken

I would, but I am already banned.

Wonder who would do it then?? I never liked ats anyways. But the a5k is a good turbo though

Doughboy · 12-15-2008, 08:55 PM

Quote:

Originally Posted by triton

unbelievable, that there is some heavy back stabbing.

That is some pretty heavy backstabbing, but there's always another side of a story..! That's extreme B S that ATS could stoop so low as to go to the EPA and tattle tale.. Only problem is, PDI would double stab anybody in the back if they would have thought of it first or it would make them a buck..sorry to say..! PDI has already done their backstabbing to ATS..

IC-Smoke · 12-15-2008, 08:59 PM

awesome! way to go ATS!

what a bunch of **** heads!!

Cummins Driver · 12-15-2008, 09:00 PM

I have never liked ATS to start out with, but if this is true, then I will for sure never own any of their products now. Im not saying its bad to put a high flow DPF in the works, but to try and stab someone in the back and get specific about the company and their products, is bull.

00 black ram · 12-15-2008, 09:06 PM

I hope someone from either side gets on here and start gettin the facts and truth out on this. I would like to know if it is true or what. Kinda shady to be callin specific companies out like that. JMO

Doughboy · 12-15-2008, 09:08 PM

Quote:

Originally Posted by ETH/DEE

The real

is that PDI SELLS ATS PRODUCTS. WTF?

PDI hasn't been selling any ATS products for Quite a very long time now..

MAXTORQ · 12-15-2008, 09:09 PM

Quote:

Originally Posted by 00 black ram

I hope someone from either side gets on here and start gettin the facts and truth out on this. I would like to know if it is true or what. Kinda shady to be callin specific companies out like that. JMO

Hey I can place a call in the AM.

Scooter's Roofing · 12-15-2008, 09:10 PM

I've never liked ATS... they don't stand behind their product, and now it looks like they don't stand behind their customer base

12-15-2008, 08:19 PM	#42
RickFox Name: RickFox Title: Too Much Time Status: Not Here Join Date: Oct 2006 Location: Columbus, OH Member`s Gallery Posts: 1,232	WOW! That is all I can say is WOW! Rick __________________ 2015 Low N Show Dually COMPETITIONDIESEL.COM Bringing the BEST together.

12-15-2008, 08:20 PM	#43
J.Keith Name: J.Keith Title: Pro Diesel Tech Status: Not Here Join Date: Feb 2007 Location: Loveland CO Member`s Gallery Posts: 708	Well, it hurts a bit as the NSPA is the only organization around here that I can pull with. But damn, I wouldn't be able to keep from making an issue about it. __________________ 2007 Dodge 3500 6.7 Cummins, 68RFE. Smartay power.

12-15-2008, 08:22 PM	#44
Toolman Name: Toolman Title: Comp Diesel Sponsor Status: Not Here Join Date: Nov 2006 Location: Southern Michigan Member`s Gallery Posts: 1,077	Kind of sounds like PDI was getting into ATS'S briches a little with their manifolds and stuff and they have an ax to grind. The problem is they are going to put a finger on all of us because of it . __________________ 04.5 Dodge ,PPE Dual Fueler, Stainless Diesel, Bullseye Power Turbo, Fass Fuel Systems, M & J Tool Converter and shafts, Smarty UDC Tuning , Isspro Gauges, Fluidampr B&B Tooling 269-496-9021 B & B Tooling Intakes and custom machined parts. Member of Drive by Wire Mafia

12-15-2008, 08:23 PM	#45
mudder500 Name: mudder500 Title: Too Much Time Status: Not Here Join Date: Mar 2008 Location: shreveport, la Member`s Gallery Posts: 1,200	Someone should post this on dtr and see how long it takes to get banned. Im sure larry wouldnt like it. __________________ 09 Crew LWB 4wd 6.7 Auto. Best bonus I've ever gotten

12-15-2008, 08:25 PM	#46
Luken Name: Luken Title: ........ Status: Not Here Join Date: Jul 2006 Location: Joplin, MO Member`s Gallery Posts: 332	Is anyone from ATS a member on CompD? __________________ '05 Yellow Cummins

12-15-2008, 08:34 PM	#48
MAXTORQ Name: MAXTORQ Title: Drop by, beers on me ! Status: Not Here Join Date: Apr 2007 Location: Golden,Colorado Member`s Gallery Posts: 1,566	Can't tell you how many times I get compared to those guys. And my shop is two minutes from theirs. I often get asked " Do you guys do the same thing those guys do"? My answer is NO as I give a do give a rats A$$ about my customers. The article does not surprise me however.

12-15-2008, 08:34 PM	#49
W1cked Name: W1cked Title: Diesel Junkie Status: Not Here Join Date: Feb 2007 Location: Miami Member`s Gallery Posts: 382	Does not surprise me at all. The guys at ATS screwed me on my first tranny. I bought a full billet tranny from them that lasted a whooping four hours before it melted. When i opened the tranny the only billet part in it was the input shaft. These guys have been on my sh@t list since i got into the sport. __________________ 2006 Dodge Ram 2500 4x4 Mega Cab Thanks to all my sponsors: Industrial Injection, Nitrous Express, Amsoil, Tranny Tech, GAW

12-15-2008, 08:39 PM	#50
Mike D Name: Mike D Title: Ctrl - Alt - Diesel Status: Not Here Join Date: Feb 2007 Location: Rural Hall, NC Member`s Gallery Posts: 870	Holy crap. Copied and saved to hard drive... __________________ Nitrous: The timeshare of the horse power world. Last edited by Mike D; 12-15-2008 at 08:47 PM.

12-15-2008, 08:59 PM	#55
IC-Smoke Name: IC-Smoke Title: Oh SNAP! Status: Not Here Join Date: Oct 2006 Location: Pittsford, Michigan Member`s Gallery Posts: 1,144	awesome! way to go ATS! what a bunch of **** heads!! __________________ IAN 2005 CCSB 3500 Laramie Weatherguard boxes and a Boss VXT

12-15-2008, 09:00 PM	#56
Cummins Driver Name: Cummins Driver Title: THE Cummins Driver Status: Not Here Join Date: May 2007 Location: Kentucky Member`s Gallery Posts: 2,405	I have never liked ATS to start out with, but if this is true, then I will for sure never own any of their products now. Im not saying its bad to put a high flow DPF in the works, but to try and stab someone in the back and get specific about the company and their products, is bull. __________________ 94 Dodge 2500 4x4 Reg Cab Some fueling/HE351cw and a Semi-Built Auto 01 Dodge 3500 4x4 Dually Ext. Cab Home Built 47re and an Edge Juice/Attitue & Air Dog 93 D250 Club Cab A518 - THD Fuel Pin

12-15-2008, 09:06 PM	#57
00 black ram Name: 00 black ram Title: Cummin's Enthusiast Status: Not Here Join Date: Nov 2007 Location: WV Member`s Gallery Posts: 1,105	I hope someone from either side gets on here and start gettin the facts and truth out on this. I would like to know if it is true or what. Kinda shady to be callin specific companies out like that. JMO __________________ 03' CR 3500 SRW / S366/74 - S483/96 / Flux 7.5's / 2 modified CP3's / Manual 48RFE / UDC tuned

12-15-2008, 09:10 PM	#60
Scooter's Roofing Name: Scooter's Roofing Title: Too Much Time Status: Not Here Join Date: Oct 2006 Member`s Gallery Posts: 17,007	I've never liked ATS... they don't stand behind their product, and now it looks like they don't stand behind their customer base __________________ that's pretty much all of it