traction

What is a good tire for traction? I went the track a few days ago once i locked all it did was spin everytime i got in it. I tried spraying in overdrive and it still spin. Its only a 285 street tire. Time slip
60Ft........1.8779
330Ft......5.0108
594Ft.......7.0637
660Ft.......7.5220
Mph 98.02
Thanks for any help or advice.

Drag slicks work well for drag racing on a prepped track, I'd try drag slicks!!!

If you don't have 4x4 available, you need drag radials at a minimum on a truck that can do 100 mph in the 1/8th. Look into those 390 wide 17" drag radials, they hook well and fit the newer trucks with large brakes.

I was in 4wd drive sorry i failed to mention that.

Do you have any suspension work done? I would still get some radials on there. What are the details on the truck?

Its a rclb full stock suspension.160 pump. 5×20 injectors a .50 jet of nitrous and a silver 66 gated at 45psi. I ttied spraying 3rd lock up but it spun. Whats the best tire to run?

if drag only I'd run a hoosier 30" DOT radial DR2, 325/45-18 on an 18x9" wheel. This combo is roughly $500 cheaper than my setup.

I have a set of 390/40/17 M&H drag radials, 12.5" of tread, 18x10 fuel mavericks. 1.62 is my best 60', only 8 passes on them and still dailing in suspension, spinning til I hit second gear. Ive found out a small burnout to clean off and open up the tread makes them bite sooo much harder off the line. RCLB duramax is my truck