timing

L

linkbelt81

New member
P pumped 13 mm timing should be set at ??????

I want to make 1200 hp and was wondering if the timing is set alot forward what will happen ? Idle ??????

Thanks
 
Well Diesel Power magazine said that it takes about 1 psi of boost to make 10 HP, so you need 120 psi of boost, and I read on one of the forumz that sled pullers advance 1º of timing for every pound of boost, so you are going to need at least 120º of timing...
 
Completely right except for the everything :lolly:

cetanefreek said:
Well Diesel Power magazine said that it takes about 1 psi of boost to make 10 HP, so you need 120 psi of boost, and I read on one of the forumz that sled pullers advance 1º of timing for every pound of boost, so you are going to need at least 120º of timing...
Click to expand...
 
Well Diesel Power magazine said that it takes about 1 psi of boost to make 10 HP, so you need 120 psi of boost
Click to expand...
not quite but it's close, timing, start at 25, once your making that boost (assuming it's good air) and go from there!

Pigs will fly in a magazine, take the info for it's face value!

Jim
 
You must log in or register to reply here.
Back
Top