Refined list of 6.7 parts. - Page 10 - Competition Diesel.Com

Bad-Duvall · 05-21-2019, 02:04 PM

Mark,
Would you have a NOX sensor 13+ Its the one in the down pipe?

Mark Nixon · 05-21-2019, 03:00 PM

I believe so.
A pic of it's location will help.

Mark.

Mark Nixon · 05-26-2019, 09:23 PM

Sold a few, bought a few.

Mark.

Mark Nixon · 06-13-2019, 06:14 PM

Pulled the 2015 down and found damage.
It dropped a seat, trashed the piston top and did some cylinder damage on #2.

This is getting more and more common on the 2013 and up engines, with the unshrouded exhaust valves.

Pics show the damage, 3rd one is of the damage to the head.

I'd take $1300 for this short block.

70440charger · 06-13-2019, 10:36 PM

Hey Mark,
Any gut feeling as to why the newer 6.7 are dropping seats? And what are the best ways to avoid it? Super interested cause I was excited to run one of those new style heads...

More to the point of your thread, Do you have those 425 studs still? I am assuming that they were 24v studs?

Thanks!

Mark Nixon · 06-13-2019, 10:48 PM

My thoughts on seats dropping are too much heat and probably a loose fit.
The dimple between exhaust valves doesn't impress me, either.
Seems like a place that's thinner, so it gets hotter.

As far as the 425s, they are 24 valve and I have 2 sets, each with 1 torque per set on them.

Mark.

Mark Nixon · 06-21-2019, 01:22 PM

Picked up 2 well-seared 6.7 longblocks.
A 2017 with under 40k and a 2015.
Both spin freely and have cracked shelves.

Pulling heads on both over the weekend.

If the bores are nice, $1600 a shortblock, or $1900 with heads, pushrods and rockers.

clifdawg · 06-23-2019, 09:58 PM

Quote:

Originally Posted by Mark Nixon

My thoughts on seats dropping are too much heat and probably a loose fit.
The dimple between exhaust valves doesn't impress me, either.
Seems like a place that's thinner, so it gets hotter.

As far as the 425s, they are 24 valve and I have 2 sets, each with 1 torque per set on them.

Mark.

Sent you a pm on a set of 425s if you still have them. Thanks.

Mark Nixon · 06-23-2019, 10:29 PM

1 set of 425s sold.
Also sold some of the miscellaneous stuff, like rockers, valve covers and pumps, last week. Then used it to pay the bills!

C'mon! Someone make me a deal on all of this 6.7 stuff!
Package deal! Come look with 1 or 2 stuffed wallets and you can own it all!

Mark.

Mark Nixon · 06-24-2019, 09:52 PM

Pulled down 2 engines today, a 2015 and a 2017.
One ('15) has very nice bores, the other ('17) likely needs punched .020.

So, now I have the following from these 2 engines:

2017 shortblock, light rust in bores, recommend boring .020, has a nice crank, no pan or accessories, $1400.

2015 shortblock, zero rust in the bores, nice hone marking, has a nice crank, no pan or accessories, $1600.

2 sets of lower miles pressed tip rockers, with stands and bolts, NO HEAT DAMAGE, $125/set SHIPPED.

1 set of injectors, 3 from the '15 and 3 from the '17, $75/apiece SHIPPED.

68RFE or AISEN adapter plates, little sooty, not melted or broken, $125 SHIPPED.

I also have the 2 heads from these engines, plus 5 others (7 total) that have cracked intakes, so they'd be okay for cutoffs for aftermarket intakes.
I'd sell the whole batch for $1900 and I WILL PAY FREIGHT!!!
The offer on the heads is good through SATURDAY of this week.

Mark Nixon · 07-08-2019, 10:02 PM

The head offer is still on the table!

I also have two 6.7 blocks with very rusty bores, either of which would be solid foundations for a sleeved and deck plated engine.
$350 apiece, or $600 for the pair.

Mark.

Mark Nixon · 07-09-2019, 10:17 PM

Pulled down a 2015 today, have a block with damage to #3 bore from a dropped seat, would bore .020, $650.
Also have a very clean, nice, standard crank from a 2009, $675.

Cummins12v · 07-10-2019, 09:17 AM

Do you still have fuel rail

Mark Nixon · 07-16-2019, 06:26 PM

Sold 3 longblocks and a shortblock yesterday, for a smoking deal.

Still have some rusty 6.7 blocks, a bunch of 5.9/6.7 heads, along with a bunch of other 5.9, 6.0 and 7.3 stuff, all headed to the iron in a while.

Mark Nixon · 08-03-2019, 12:59 AM

Pulled apart a 2008 with engine tar in it the other day.
The block needs bored, crank is likely toast, might go .020 on R/Ms.

$550 for the block and the tar is free.

SHIPPING is running an average of $140 through Fastenal, at the moment.

Mark Nixon · 08-16-2019, 02:51 PM

Picked up a 2015 6.7 core the other day, minus the turbo and fan hub, it's complete from cover to pan, flywheel to damper, with fuel rail, injectors and CP3.
With the exception of the longblock (which needs to be pulled down and checked over), it'll part as follows:

Fuel rail and lines, with CP3 line, $250 SHIPPED.

Injectors, as cores, $400/set SHIPPED.

Complete 6.7 valve cover, including rocker box, injector harness and all bolts, $250 SHIPPED.

Full set of fixed tip rocker arms, with pedestals, $150 SHIPPED.

68RFE adapter plate, $135 SHIPPED.

Harmonic damper, with bolts, $125 SHIPPED.

I also have a burned 2015 shortblock, with slightly rusty bores, that rotates 360* and should clean at .020, $1300.

Finally, I still have the tarred-up 2008 6.7 block listed above, as well as 2 bare blocks that need bored or sleeved, for $550 each.

Mark Nixon · 08-29-2019, 11:21 AM

Just got in a 2012 6.7 with ARP 425 head studs and a delete kit, that I will be tearing down in the next few days.

Studs are $280 SHIPPED.

Delete kit, block off plates for intake & exhaust, plus the cooler delete support bracket, $75 SHIPPED.

OneBadCummins · 08-29-2019, 06:09 PM

Quote:

Originally Posted by Mark Nixon

Just got in a 2012 6.7 with ARP 425 head studs and a delete kit, that I will be tearing down in the next few days.

Studs are $280 SHIPPED.

Delete kit, block off plates for intake & exhaust, plus the cooler delete support bracket, $75 SHIPPED.

Shoot me a text on the bottom coolant housing if youd seperate. Thanks

Tyler

Sent from my SM-G960U using Tapatalk

Mark Nixon · 08-29-2019, 08:23 PM

Texted, priced, crickets.

Next!

Mark.

fordpickupman · 08-29-2019, 08:42 PM

You rested up from that big tour yet?

05-21-2019, 02:04 PM	#181
Bad-Duvall Name: Bad-Duvall Title: MOST HATED Status: Not Here Join Date: Oct 2007 Location: Perryville, Mo/Saint louis Member`s Gallery Posts: 1,419	Mark, Would you have a NOX sensor 13+ Its the one in the down pipe? __________________ 07 Dodge 2500 1996 12v 2007 Dodge Ram 2500 - Cummins Diesel Engine - Diesel Power Magazine

05-21-2019, 03:00 PM	#182
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	I believe so. A pic of it's location will help. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

05-26-2019, 09:23 PM	#183
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Sold a few, bought a few. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

06-13-2019, 10:36 PM	#185
70440charger Name: 70440charger Title: Green Behind the Ears Status: Not Here Join Date: Apr 2015 Location: Middle GA Member`s Gallery Posts: 82	Hey Mark, Any gut feeling as to why the newer 6.7 are dropping seats? And what are the best ways to avoid it? Super interested cause I was excited to run one of those new style heads... More to the point of your thread, Do you have those 425 studs still? I am assuming that they were 24v studs? Thanks! __________________ Driving the 4bt swapped 1985 W150 for now. Saving up for fun!

06-13-2019, 10:48 PM	#186
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	My thoughts on seats dropping are too much heat and probably a loose fit. The dimple between exhaust valves doesn't impress me, either. Seems like a place that's thinner, so it gets hotter. As far as the 425s, they are 24 valve and I have 2 sets, each with 1 torque per set on them. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

06-21-2019, 01:22 PM	#187
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Picked up 2 well-seared 6.7 longblocks. A 2017 with under 40k and a 2015. Both spin freely and have cracked shelves. Pulling heads on both over the weekend. If the bores are nice, $1600 a shortblock, or $1900 with heads, pushrods and rockers. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

06-23-2019, 10:29 PM	#189
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	1 set of 425s sold. Also sold some of the miscellaneous stuff, like rockers, valve covers and pumps, last week. Then used it to pay the bills! C'mon! Someone make me a deal on all of this 6.7 stuff! Package deal! Come look with 1 or 2 stuffed wallets and you can own it all! Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

06-24-2019, 09:52 PM	#190
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Pulled down 2 engines today, a 2015 and a 2017. One ('15) has very nice bores, the other ('17) likely needs punched .020. So, now I have the following from these 2 engines: 2017 shortblock, light rust in bores, recommend boring .020, has a nice crank, no pan or accessories, $1400. 2015 shortblock, zero rust in the bores, nice hone marking, has a nice crank, no pan or accessories, $1600. 2 sets of lower miles pressed tip rockers, with stands and bolts, NO HEAT DAMAGE, $125/set SHIPPED. 1 set of injectors, 3 from the '15 and 3 from the '17, $75/apiece SHIPPED. 68RFE or AISEN adapter plates, little sooty, not melted or broken, $125 SHIPPED. I also have the 2 heads from these engines, plus 5 others (7 total) that have cracked intakes, so they'd be okay for cutoffs for aftermarket intakes. I'd sell the whole batch for $1900 and I WILL PAY FREIGHT!!! The offer on the heads is good through SATURDAY of this week. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-08-2019, 10:02 PM	#191
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	The head offer is still on the table! I also have two 6.7 blocks with very rusty bores, either of which would be solid foundations for a sleeved and deck plated engine. $350 apiece, or $600 for the pair. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-09-2019, 10:17 PM	#192
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Pulled down a 2015 today, have a block with damage to #3 bore from a dropped seat, would bore .020, $650. Also have a very clean, nice, standard crank from a 2009, $675. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

07-10-2019, 09:17 AM	#193
Cummins12v Name: Cummins12v Title: Diesel Enthusiast Status: Not Here Join Date: Nov 2007 Location: Texas Member`s Gallery Posts: 108	Do you still have fuel rail __________________ 96 dually....money pit 2007 dually work... also money pit

07-16-2019, 06:26 PM	#194
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Sold 3 longblocks and a shortblock yesterday, for a smoking deal. Still have some rusty 6.7 blocks, a bunch of 5.9/6.7 heads, along with a bunch of other 5.9, 6.0 and 7.3 stuff, all headed to the iron in a while. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-03-2019, 12:59 AM	#195
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Pulled apart a 2008 with engine tar in it the other day. The block needs bored, crank is likely toast, might go .020 on R/Ms. $550 for the block and the tar is free. SHIPPING is running an average of $140 through Fastenal, at the moment. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-29-2019, 11:21 AM	#197
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Just got in a 2012 6.7 with ARP 425 head studs and a delete kit, that I will be tearing down in the next few days. Studs are $280 SHIPPED. Delete kit, block off plates for intake & exhaust, plus the cooler delete support bracket, $75 SHIPPED. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM. Last edited by Mark Nixon; 08-29-2019 at 11:23 AM.

08-29-2019, 08:23 PM	#199
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Texted, priced, crickets. Next! Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

08-29-2019, 08:42 PM	#200
fordpickupman Name: fordpickupman Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2013 Location: Cascade, ID Member`s Gallery Posts: 106	You rested up from that big tour yet? __________________ '71 F250 Farrel 180Ppump, AFClive, 5x012inj, 4k, HE367cw, Hami valves ported head, built 47rh, divorced NP205 twinsticks '96 F350 Colt stage3, Hami valves, built 47rh, 180pump, 181dv, AFClive, 5x012inj, 4k, 60#springs, 19* timing