JNewman92
Its Only $$$$$
FOR SALE:
47RH w/ RE front main case
DPC Triple Disc Converter 2600 stall
HD Flexplate (shown in pics)
So I have all parts receipts from when this thing was built and can provide pictures of them if desired. Everything literally only has idle time.
Build was done back in 2016 by a local builder, the whole case is painted and cleared btw as shown in pictures. The transmission has a 47re front case (8 pin connector) with a RH tail housing. Reason for this being I had planned to go to a trans brake at some point and also so I didn’t have to modify driveshafts, crossmember, or 4wd linkage. Transmission is rated for 800 hp.
Transmission Parts list are as follows:
TCS Arizona Billet input
TCS Canada RH billet output
Supertec rear servo
Assembled using Goerend GT2 master rebuild kit (no HD Belleville) includes the following:
Goerend Billet Front/Direct Clutch Apply Piston
Raybestos Pro Series Front Band
3.8 Front Band Apply Lever, Strap, & Anchor
Billet 4-Ring Accumulator Piston
Sonnax Billet Front Servo Cover
Sonnax Billet Rear Servo Piston
47 pump
48 direct drum
Valve body is full manual utilizing a transgo shift kit part # (TRG-TFOD-3)
Goerend Deep Pan
Price:
$4000 with a core 47re and core converter or $3500 with a core 48re and core converter.
May separate converter and Flexplate from the transmission but I would still need a core 47/48re. Can adjust price for serious buyer wanting all parts but doesn’t have cores.
Located in Northern Kentucky, 20 minutes south of Cincinnati. If interested, PM on here or text me at (859) 468-3056.
47RH w/ RE front main case
DPC Triple Disc Converter 2600 stall
HD Flexplate (shown in pics)
So I have all parts receipts from when this thing was built and can provide pictures of them if desired. Everything literally only has idle time.
Build was done back in 2016 by a local builder, the whole case is painted and cleared btw as shown in pictures. The transmission has a 47re front case (8 pin connector) with a RH tail housing. Reason for this being I had planned to go to a trans brake at some point and also so I didn’t have to modify driveshafts, crossmember, or 4wd linkage. Transmission is rated for 800 hp.
Transmission Parts list are as follows:
TCS Arizona Billet input
TCS Canada RH billet output
Supertec rear servo
Assembled using Goerend GT2 master rebuild kit (no HD Belleville) includes the following:
Goerend Billet Front/Direct Clutch Apply Piston
Raybestos Pro Series Front Band
3.8 Front Band Apply Lever, Strap, & Anchor
Billet 4-Ring Accumulator Piston
Sonnax Billet Front Servo Cover
Sonnax Billet Rear Servo Piston
47 pump
48 direct drum
Valve body is full manual utilizing a transgo shift kit part # (TRG-TFOD-3)
Goerend Deep Pan
Price:
$4000 with a core 47re and core converter or $3500 with a core 48re and core converter.
May separate converter and Flexplate from the transmission but I would still need a core 47/48re. Can adjust price for serious buyer wanting all parts but doesn’t have cores.
Located in Northern Kentucky, 20 minutes south of Cincinnati. If interested, PM on here or text me at (859) 468-3056.
