Turbos, good, bad and ugly. - Competition Diesel.Com

Mark Nixon · 10-24-2018, 04:19 PM

ON3 78mm turbo, 1.01 A/R, 87mm turbine, T4, has nicks and chips in the compressor wheel, from being run with no air cleaner, has some minor play, should still run with either a new wheel, or clean up on this one, bought it off here years ago, $275 SHIPPED.

Holset HT3B, with a 23cm T-4 housing, part number 3525325, from an ancient Cummins, nice and tight, could use a good cleaning, $250 SHIPPED.

Borg Warner S467.7, from a BURN, has a 1.10 T-4 housing, still spins over, possibly has a warped turbine, AS-IS, $175 SHIPPED.

Borg Warner SX-E 478, .90 A/R T-4 housing, turbo part number 14879880082, this was a new unit that got ran out of oil and killed the bushings, no major housing contact, but it's definitely a loose core, $400/obo.

2004.5-2007 Holset HE351CW, good runner, typical clearances for a used turbo, has sensor, $350 SHIPPED.

Reply, PM, Call or Text 402-780-5127.

odieub · 10-24-2018, 09:17 PM

Text sent.

Mark Nixon · 10-24-2018, 09:22 PM

I'll post a few pics of these turbos at some point tomorrow.

Mark.

odieub · 10-24-2018, 09:24 PM

Thanks mark.

turbo2387 · 10-25-2018, 04:37 AM

Sent you a text

Mark Nixon · 10-25-2018, 01:22 PM

Pics of the 467.7.
I did dump some oil down the cartridge and let it sit.
It turned freely, seems smooth and it didn't look or feel like the shaft was bent.
It does have a superficial spot of what looks like melted aluminum, but I doubt it affects a thing.

Mark.

Mark Nixon · 10-25-2018, 01:42 PM

S-478 pics.

Mark.

Mark Nixon · 10-25-2018, 03:06 PM

The S-467.7 is SOLD!
I'll come down significantly on the S-478.
__________________________________
---------------------------------------------------

Quote:

Originally Posted by blackmega3500

Mark you been sending out those mystery packages?

Nope!
If I were that capable and deranged, we wouldn't have certain people around.

Hard to believe that so MANY supposedly got sent out, yet not a ONE has done any more damage than make a liberal's hair stand on end, plus, maybe, make their blood run a little colder than normal.
We'll never know the full truth about who sent them and why they got sent, but one can imagine.

Mark.

Mark Nixon · 10-25-2018, 04:05 PM

I brainfarted!
The "S-478" is actually an S-472.
Dunno' why I did that.

Mark.

weazel · 10-25-2018, 06:04 PM

Does the 472 have the v band clamp for the center cartridge to exhaust housing? Or is it bolt style?

Justappumped24v · 10-25-2018, 06:10 PM

Quote:

Originally Posted by Mark Nixon

I brainfarted!
The "S-478" is actually an S-472.
Dunno' why I did that.

Mark.

Mark is the 472 a 87mm turbine?

Mark Nixon · 10-25-2018, 06:22 PM

Quote:

Originally Posted by weazel

Does the 472 have the v band clamp for the center cartridge to exhaust housing? Or is it bolt style?

V-band style.

Quote:

Originally Posted by Justappumped24v

Mark is the 472 a 87mm turbine?

Not sure on that.
Seems like I saw something about the size when I googled the part number.

Mark.

turbo2387 · 10-25-2018, 06:41 PM

PN shows 87mm

Mark Nixon · 10-26-2018, 01:54 PM

Pulled the 472 apart and it measured ~87.3 on the big end, BUT, the CHRA is history.
I think the compressor wheel and cover is usable, but the turbine and bearing housing is definitely junk.
Can't really SEE any direct damage on the exhaust housing, though I'm sure someone else more into these things probably could.

I'd do $200 shipped on the thing, or make me offers on the parts you might want from it.

Mark.

Mark Nixon · 10-26-2018, 02:57 PM

Pics of the HT3B.

Mark.

Mark Nixon · 10-26-2018, 03:07 PM

Pics of the ON3.

Mark.

Mark Nixon · 10-28-2018, 02:45 PM

Parting out the s-472, SOLD the exhaust housing already.
Make offers on the rest of it, otherwise I'll deposit the rest of it into the scrap bin.

Mark.

Chris_pat · 10-28-2018, 09:31 PM

Is the bearing housing rebuildable? On the s472?

Mark Nixon · 10-28-2018, 09:35 PM

I would say not, there's no place left for the sealing ring to ride on.

Mark.

Mark Nixon · 10-31-2018, 06:50 PM

The S-472 is all gone.
Still have the HT4B with the 23cm divided housing, the ON3 78mm turbo and an HE351CW.

Mark.

10-24-2018, 04:19 PM	#1
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Turbos, good, bad and ugly. ON3 78mm turbo, 1.01 A/R, 87mm turbine, T4, has nicks and chips in the compressor wheel, from being run with no air cleaner, has some minor play, should still run with either a new wheel, or clean up on this one, bought it off here years ago, $275 SHIPPED. Holset HT3B, with a 23cm T-4 housing, part number 3525325, from an ancient Cummins, nice and tight, could use a good cleaning, $250 SHIPPED. Borg Warner S467.7, from a BURN, has a 1.10 T-4 housing, still spins over, possibly has a warped turbine, AS-IS, $175 SHIPPED. Borg Warner SX-E 478, .90 A/R T-4 housing, turbo part number 14879880082, this was a new unit that got ran out of oil and killed the bushings, no major housing contact, but it's definitely a loose core, $400/obo. 2004.5-2007 Holset HE351CW, good runner, typical clearances for a used turbo, has sensor, $350 SHIPPED. Reply, PM, Call or Text 402-780-5127. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-24-2018, 09:17 PM	#2
odieub Name: odieub Title: Too Much Time Status: Not Here Join Date: Nov 2007 Location: Leitchfield, KY Member`s Gallery Posts: 923	Text sent. __________________ 95 1500 rc sb 2wd p7100 24v auto, ats 5 star, suncoast kit, dtt billit input, sperico, fun tire eater. In pieces 95 2500 2wd rclb nv5600 500k 5x.012 ddp 887 pump, #11 plate hx35/40-14cm 16 3500 4wd aisin cclb dually flatbed, toy hauler

10-24-2018, 09:22 PM	#3
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	I'll post a few pics of these turbos at some point tomorrow. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-24-2018, 09:24 PM	#4
odieub Name: odieub Title: Too Much Time Status: Not Here Join Date: Nov 2007 Location: Leitchfield, KY Member`s Gallery Posts: 923	Thanks mark. __________________ 95 1500 rc sb 2wd p7100 24v auto, ats 5 star, suncoast kit, dtt billit input, sperico, fun tire eater. In pieces 95 2500 2wd rclb nv5600 500k 5x.012 ddp 887 pump, #11 plate hx35/40-14cm 16 3500 4wd aisin cclb dually flatbed, toy hauler

10-25-2018, 04:05 PM	#9
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	I brainfarted! The "S-478" is actually an S-472. Dunno' why I did that. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-25-2018, 04:37 AM	#5
turbo2387 Name: turbo2387 Title: Nipple Fluffer Status: Not Here Join Date: Jun 2011 Location: Indiana Member`s Gallery Posts: 665	Sent you a text

10-25-2018, 06:04 PM	#10
weazel Name: weazel Title: 5th gear killer Status: Not Here Join Date: May 2008 Location: Mason, TX Member`s Gallery Posts: 2,252	Does the 472 have the v band clamp for the center cartridge to exhaust housing? Or is it bolt style? __________________ 88 Chevy Half Ton/ LB7 conversion 08 Chevy 3500HD, efi, 5” exhaust

10-25-2018, 06:41 PM	#13
turbo2387 Name: turbo2387 Title: Nipple Fluffer Status: Not Here Join Date: Jun 2011 Location: Indiana Member`s Gallery Posts: 665	PN shows 87mm

10-26-2018, 01:54 PM	#14
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Pulled the 472 apart and it measured ~87.3 on the big end, BUT, the CHRA is history. I think the compressor wheel and cover is usable, but the turbine and bearing housing is definitely junk. Can't really SEE any direct damage on the exhaust housing, though I'm sure someone else more into these things probably could. I'd do $200 shipped on the thing, or make me offers on the parts you might want from it. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-28-2018, 02:45 PM	#17
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	Parting out the s-472, SOLD the exhaust housing already. Make offers on the rest of it, otherwise I'll deposit the rest of it into the scrap bin. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-28-2018, 09:31 PM	#18
Chris_pat Name: Chris_pat Title: Built not bought Status: Not Here Join Date: Jun 2014 Location: weatherford, tx Member`s Gallery Posts: 145	Is the bearing housing rebuildable? On the s472? __________________ 2007 5.9 3500 drw 4x4 larmie Twin s400's, fleece twin cp3's, F1 200% Last edited by Chris_pat; 10-28-2018 at 09:32 PM. Reason: Forgot

10-28-2018, 09:35 PM	#19
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	I would say not, there's no place left for the sealing ring to ride on. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.

10-31-2018, 06:50 PM	#20
Mark Nixon Name: Mark Nixon Title: No Savior among the flesh Status: Not Here Join Date: Feb 2009 Location: Brownville, Nebraska Member`s Gallery Posts: 8,676	The S-472 is all gone. Still have the HT4B with the 23cm divided housing, the ON3 78mm turbo and an HE351CW. Mark. __________________ If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive. Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.