Sub mounts in a Crew Cab

JJeepyjohn

JJeepyjohn

Make Me Fries
Joined
Apr 22, 2006
Messages
3,807
I want to install a 10" sub in my 01 CC . Looking for mounting suggestions. Show me what ya got.
 
06, you have even more room.
 

Attachments

  • 20200102_112432.jpg
    20200102_112432.jpg
    422.5 KB · Views: 0
  • 20200105_143220.jpg
    20200105_143220.jpg
    193.6 KB · Views: 0
I planned on using a shallow sub already. Did you have to get rid of the tray behind the seat?
 
I cut it down and moved it over to the passenger side.

Still holds the jack, tools, jumper cables, cordless impact and a short strap. But now they're on the side that's away from traffic, if I'm on the side of the road.
 
Here is a pic. I've got the power slider too.
 

Attachments

  • 20200104_190509.jpg
    20200104_190509.jpg
    305.2 KB · Views: 0
Thanks. It's not a high dollar setup, but it sounds great for what I have invested, and I wanted a better looking box than the average one.
 
Don't buy those ebay ones. I tried one and it was a pile of junk. I basically rebuilt it and it still sucked.

On my standard cab 2nd gen, I built a nice box that held two shallow mount 12" RF P3's, and two 6x9's all in separate volumes. I loved that setup (still have the box if anyone wants it!)

In my 97 Extended Cab I tried the ebay stuff as mentioned. Then I ripped the back seat out and built a custom ported box for a 15" Kicker L7, and integrated a seat at the passenger side. That thing sounds amazing. I could get pictures, or even sell it if you are interested.

In my 4th gen, I have been toying around with the idea of smashing a shallow mount 8" under the center bench seat. I could shim it up a little if I needed. Then port to the rear.


And don't bother doing anything with the 5.25" speakers in the back. They're a waste. Just add some larger speakers.
 
CorneliusRox said:
Don't buy those ebay ones. I tried one and it was a pile of junk. I basically rebuilt it and it still sucked.

On my standard cab 2nd gen, I built a nice box that held two shallow mount 12" RF P3's, and two 6x9's all in separate volumes. I loved that setup (still have the box if anyone wants it!)

In my 97 Extended Cab I tried the ebay stuff as mentioned. Then I ripped the back seat out and built a custom ported box for a 15" Kicker L7, and integrated a seat at the passenger side. That thing sounds amazing. I could get pictures, or even sell it if you are interested.

In my 4th gen, I have been toying around with the idea of smashing a shallow mount 8" under the center bench seat. I could shim it up a little if I needed. Then port to the rear.


And don't bother doing anything with the 5.25" speakers in the back. They're a waste. Just add some larger speakers.
Click to expand...

He has a Ford...
 
displacedtexan said:
For sure. I can get you measurements even.

Thanks! I combined my trim carpenter skills and the car guy thinking.
Click to expand...

Hey Man. Seeing how I'm not busy for the next while.. If I could get those measurements. If totally appreciate it.
 
JJeepyjohn said:
Hey Man. Seeing how I'm not busy for the next while.. If I could get those measurements. If totally appreciate it.
Click to expand...

That truck has been relieved of my possession... I can give you the guesses I started with, if that helps.
 
17 1/2" tall
3" deep at the top
8" deep at the bottom
31" wide

I don't believe that I changed much if any from those guesses.
 
No problem. I feel bad thay I didn't get them before someone decided they needed my truck more than I do.
 
You must log in or register to reply here.
Back
Top