This is out of my manual for an 01... Not sure if it would be the same or not (I assume it would be)?
MAIN BEARING BORE DIAMETER CHART
ITEM MAIN BEARING BORE
DIAMETER (MAXIMUM)
A 83.106 mm 3.2719 in.)
Measure the diameter of the main journal at the
locations shown (Fig. 102). Calculate the average
diameter for each side of the journal.
CRANKSHAFT MAIN JOURNAL DIAMETER
CHART
ITEM SPECIFICATION
MINIMUM DIAMETER 82.962 mm (3.2662 in.)
MAXIMUM DIAMETER 83.013 mm (3.2682 in.)
Calculate the main bearing journal to bearing
clearance. the clearance specifications are 0.119 mm
(0.00475 inch). If the crankshaft journal is within
limits, replace the main bearings. If not within specifications,
grind the crankshaft to next size and use
oversize bearings.
__________________
"Enjoy the little things in life, because one day you will look back, and realize they were the big things"
EATSOOT.com
Last edited by GOT-Torque; 05-28-2009 at 01:16 AM.
|