Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
07-28-2016, 10:46 PM
|
#1
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
Entry level/budget nitrous setup
I'd like to be able to knock .5 - 1.0 second or So off a high 12 second 1/4 mile time. The truck is 6000 lbs with me in it.
Silver 64/74/14
5x.016s
7mm dv's
180 pump at 19*
Stock stall speed triple disk
Retorqued head bolts.
I've been looking on eBay for a fogger nozzle and also a cheater solenoid but I'm seeing a lot of the power shot solenoids and Edelbrock performer solenoids. Would the smaller solenoids be able to flow enough ?
__________________
stock 94
|
|
|
07-28-2016, 11:02 PM
|
#2
|
Name: DDually
Title: Still spooling..
Status: Not Here
Join Date: Nov 2009
Member`s Gallery
Posts: 2,095
|
I see a blown head gasket in your future...
__________________
1995 Cummins with almost no matching paint, 2 dents
2001 VW TDI South bend, tune, nozzys, custom stuff that's rusting, one custom thing that's not rusting
|
|
|
07-28-2016, 11:18 PM
|
#3
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
When it pops I'll get it re surfaced, possibly some port work and put some 425s or new bolts in it. There may be a shop in state that o rings heads.
__________________
stock 94
Last edited by SCHMITTY; 07-28-2016 at 11:19 PM.
|
|
|
07-29-2016, 07:41 AM
|
#4
|
Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
|
What does it run now? Seems to me it should be in the low 12s or high 11s already with what you have now.
__________________
Jacob, 97 rclb
|
|
|
08-06-2016, 07:26 PM
|
#5
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
I'm haven't ran it yet.
__________________
stock 94
|
|
|
08-08-2016, 08:15 AM
|
#6
|
Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
|
Well get it on the track and find out. Before adding any drugs.
__________________
Jacob, 97 rclb
|
|
|
08-10-2016, 06:49 AM
|
#7
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
I probably won't make it to the track this year. It's open from May- Labor Day. The track is a 4 hour drive from me otherwise I'd be there a lot more. Ive been working 7/12s all summer (I'm in construction ) so that conflicts also. I'll do more research and probably buy a cheater solenoid. I keep finding the smaller ones for dirt cheap and since I'm running 5x.016s and 7mms I thought I might be able to get what I was looking for with a smaller solenoid.
__________________
stock 94
|
|
|
08-10-2016, 07:07 AM
|
#8
|
Name: RAMblin Fever
Title: Green Behind the Ears
Status: Not Here
Join Date: Oct 2015
Location: Middle Tennessee
Member`s Gallery
Posts: 76
|
Smaller solenoids should work. If you buy them used, I would get a rebuild kit for them. The seals tend to go bad if not used regularly.
|
|
|
08-10-2016, 07:46 AM
|
#9
|
Name: imelmo
Title: Go away, I'm 'batin'!
Status: Not Here
Join Date: Jun 2006
Location: Slidell, LA
Member`s Gallery
Posts: 8,878
|
Don't know what kind of budget you have but you can get a new Nitrous Express kit for about $600-$700.
.
__________________
ZMBYKLR, '03 Reg Cab Short Bed 4x4
Truck Source Diesel, Warren Diesel, Gardner Racing, Diesel Innovations, 1018 rear wheel llamathrust
10.38 @ 129.60mph
The FORDOTA, '86 Toyota reg cab tube chassis to be powered by a 6.0 Powerstroke; finally back in progress
.
|
|
|
08-10-2016, 08:08 AM
|
#10
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
I'll keep that in mind . I'm not trying to be super cheap I just noticed there were some decent looking used kits on eBay
__________________
stock 94
|
|
|
08-10-2016, 08:19 AM
|
#11
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
Quote:
Originally Posted by imelmo
Don't know what kind of budget you have but you can get a new Nitrous Express kit for about $600-$700.
.
|
I'll check that one out.
__________________
stock 94
|
|
|
08-10-2016, 08:41 AM
|
#12
|
Name: 97rada
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Member`s Gallery
Posts: 5,410
|
We just use a 100 dollar NOS solenoid from jegs. It works great for that small bump
__________________
Austin
tow truck- 14-3500 with tuning
toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s
Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.
|
|
|
08-10-2016, 09:08 AM
|
#13
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
Which ones ?
__________________
stock 94
|
|
|
08-10-2016, 11:39 AM
|
#14
|
Name: 97rada
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Member`s Gallery
Posts: 5,410
|
__________________
Austin
tow truck- 14-3500 with tuning
toy truck -94 rclb auto- 5.2x with a lot left. Shooting for 4s
Any intelligent fool can make things bigger and more complex...it takes a touch of genius- and alot of courage to move in the opposite direction.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:02 PM.
|