Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance > P-Pump 24Valve
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 04-08-2015, 07:19 PM   #1
mathews8pt

Name: mathews8pt
Title: Too Much Time
Status: Not Here
Join Date: May 2009
Location: central ohio
Member`s Gallery
Posts: 2,269
800hp 24v setups

My goal is to break 800 this year and while I wait for free time to finish some little stuff on the truck, I was wondering what kind of setups you guys are running.

I made around 725 2 years ago with a cast wheel s468 and the same fueling setup. Now I have a set of 64/71/14 and 80/96/1.32 compounds. Fueling is a 180 pump(racked on the truck), 5ks, comp cuts, and 6x13 injectors. I'm wondering if I will need more injector to be over 800 this year? Thoughts?

P-pumped 24v setups only please.

Edit: truck has a older maxspool cam and I ported a good bit on the bowls and exhaust side of the head also.

Sent from my iPhone using Tapatalk
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single

Last edited by mathews8pt; 04-08-2015 at 07:21 PM.
 
Old 04-08-2015, 07:24 PM   #2
SHughes
 
SHughes's Avatar

Name: SHughes
Title: Too much is never enough!
Status: Not Here
Join Date: Jan 2008
Location: Bellevue, NE
Member`s Gallery
Posts: 9,267
I did 800 with 7x.010's and 7x.012's.
__________________
Quote:
Originally Posted by Joesixpack View Post
That statement just reduced the collective IQ of the entire forum.
 
Old 04-08-2015, 07:37 PM   #3
mathews8pt

Name: mathews8pt
Title: Too Much Time
Status: Not Here
Join Date: May 2009
Location: central ohio
Member`s Gallery
Posts: 2,269
That's impressive with 7x10s! You were running 62/80 compounds or something similar weren't you?


Sent from my iPhone using Tapatalk
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single
 
Old 04-08-2015, 09:16 PM   #4
RHP997
 
RHP997's Avatar

Name: RHP997
Title: part-time
Status: Not Here
Join Date: Apr 2012
Location: south texas
Member`s Gallery
Posts: 271
I did 921 last year with 7x.012's. 366/482
__________________
2016 NHRDA 10.90 champion
 
Old 04-09-2015, 09:29 AM   #5
SHughes
 
SHughes's Avatar

Name: SHughes
Title: Too much is never enough!
Status: Not Here
Join Date: Jan 2008
Location: Bellevue, NE
Member`s Gallery
Posts: 9,267
The 7x.010's were good old Mach 7's. and it was an SPS62 and HT4C. essentially and 62 over an 83.
__________________
Quote:
Originally Posted by Joesixpack View Post
That statement just reduced the collective IQ of the entire forum.
 
Old 04-09-2015, 09:33 AM   #6
Snedge
 
Snedge's Avatar

Name: Snedge
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Sep 2006
Location: Western Pa.
Member`s Gallery
Posts: 18,831
Quote:
Originally Posted by SHughes View Post
The 7x.010's were good old Mach 7's. and it was an SPS62 and HT4C. essentially and 62 over an 83.
I miss that truck.
 
Old 04-09-2015, 09:45 AM   #7
SHughes
 
SHughes's Avatar

Name: SHughes
Title: Too much is never enough!
Status: Not Here
Join Date: Jan 2008
Location: Bellevue, NE
Member`s Gallery
Posts: 9,267
Quote:
Originally Posted by Snedge View Post
I miss that truck.
I like the "new" truck better.
__________________
Quote:
Originally Posted by Joesixpack View Post
That statement just reduced the collective IQ of the entire forum.
 
Old 04-09-2015, 09:13 PM   #8
12vCumminsFTW
 
12vCumminsFTW's Avatar

Name: 12vCumminsFTW
Title: Too Much Time
Status: Not Here
Join Date: Dec 2010
Location: Willcox, AZ
Member`s Gallery
Posts: 1,377
Quote:
Originally Posted by RHP997 View Post
I did 921 last year with 7x.012's. 366/482
12mm or...? just curious.
__________________
-Aaron H.

97 12v 4x4
 
Old 04-10-2015, 10:11 AM   #9
jlbayes
 
jlbayes's Avatar

Name: jlbayes
Title: Too Much Time
Status: Not Here
Join Date: Mar 2011
Location: michigan
Member`s Gallery
Posts: 2,399
__________________
Jacob, 97 rclb
 
Old 04-10-2015, 12:53 PM   #10
SHughes
 
SHughes's Avatar

Name: SHughes
Title: Too much is never enough!
Status: Not Here
Join Date: Jan 2008
Location: Bellevue, NE
Member`s Gallery
Posts: 9,267
Quote:
Originally Posted by Snedge View Post
I miss that truck.
I just remembered...when you had it, it had 8x.009's in it.
__________________
Quote:
Originally Posted by Joesixpack View Post
That statement just reduced the collective IQ of the entire forum.
 
Old 04-10-2015, 01:34 PM   #11
mathews8pt

Name: mathews8pt
Title: Too Much Time
Status: Not Here
Join Date: May 2009
Location: central ohio
Member`s Gallery
Posts: 2,269
So I should have enough injector, that's good. My pump probably could use sent out and balanced better then it is now. But I will probably see what it will do before spending the $350 or whatever it is for Seth to do it these days.


Sent from my iPhone using Tapatalk
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single
 
Old 04-11-2015, 01:58 PM   #12
bsmith
 
bsmith's Avatar

Name: bsmith
Title: Never enough
Status: Not Here
Join Date: Jul 2008
Location: la
Member`s Gallery
Posts: 3,966
Quote:
Originally Posted by mathews8pt View Post
So I should have enough injector, that's good. My pump probably could use sent out and balanced better then it is now. But I will probably see what it will do before spending the $350 or whatever it is for Seth to do it these days.


Sent from my iPhone using Tapatalk
Who's dvs?

I think you should have 800.
__________________



RIP DEX

2001 2500 2wd
Diesel pro's cam
Walbro 392
Goff diesel injection
160hp pump
6x.013's by Weston
HTT 62/71/13 over FI 82/92/1.10
Levi's turbo blankets!
 
Old 04-11-2015, 06:19 PM   #13
mathews8pt

Name: mathews8pt
Title: Too Much Time
Status: Not Here
Join Date: May 2009
Location: central ohio
Member`s Gallery
Posts: 2,269
Quote:
Originally Posted by bsmith View Post
Who's dvs?

I think you should have 800.

I have .024s in it now, also have 8mm comp cuts and some full cuts laying around. Planning to swap in the comp cuts and run those.


Sent from my iPhone using Tapatalk
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single
 
Old 08-30-2015, 10:40 PM   #14
FaroFummins
 
FaroFummins's Avatar

Name: FaroFummins
Title: Rookie
Status: Not Here
Join Date: Feb 2015
Member`s Gallery
Posts: 14
really interested in this as well. currently have 7x10s doing a 63/80 compound set up. 750+hp is the goal. is it necessary to go to a 6 x13 or 6 x15 6x16 to have that goal.(comes down to whats for sale) still have stock dvs in the bump so I'm thinking 7mm comp cuts. only other mods are 4ks to the bump just curios new to all of this any advice would help
 
Old 08-30-2015, 11:03 PM   #15
oldblue116
 
oldblue116's Avatar

Name: oldblue116
Title: Too Much Time
Status: Not Here
Join Date: May 2011
Location: Finleyville pa
Member`s Gallery
Posts: 2,203
I made a little over 800hp on fuel and 1002hp with a little spray on a 215 pump from Seth with 4ks (needs 5ks) 6x18 dual feeds, s475/83/1.0, on an air dog that wouldn't give me nearly the fuel it needed and zero pump tuning. With more fuel and rpm it definately has more to go. Good luck reaching your goal. Good choice going with Seth.
__________________
02 dodge ecsb. To have fun with.
01 dodge ecsb. To tow the 02 with.

Thanks to Mumau diesel
 
Old 09-01-2015, 11:34 AM   #16
24vboost
 
24vboost's Avatar

Name: 24vboost
Title: Too Much Time
Status: Not Here
Join Date: Apr 2015
Member`s Gallery
Posts: 276
Quote:
Originally Posted by oldblue116 View Post
I made a little over 800hp on fuel and 1002hp with a little spray on a 215 pump from Seth with 4ks (needs 5ks) 6x18 dual feeds, s475/83/1.0, on an air dog that wouldn't give me nearly the fuel it needed and zero pump tuning. With more fuel and rpm it definately has more to go. Good luck reaching your goal. Good choice going with Seth.
Where was your timing at when you made those numbers?

Similar setup over here.

13mm with high flow DVs, quickrate cam, 5ks and all.

Weston's 6X.018s

A1000 LP and a billet S475/87/.90

Looking for 850+ on fuel. Very optimistic seeing your results. I'll post mine here when it's up and going.
__________________
'02 13mm Swap and some other chit

Last edited by 24vboost; 09-01-2015 at 11:35 AM.
 
Old 09-01-2015, 11:38 AM   #17
oldblue116
 
oldblue116's Avatar

Name: oldblue116
Title: Too Much Time
Status: Not Here
Join Date: May 2011
Location: Finleyville pa
Member`s Gallery
Posts: 2,203
Quote:
Originally Posted by 24vboost View Post
Where was your timing at when you made those numbers?

Similar setup over here.

13mm with high flow DVs, quickrate cam, 5ks and all.

Weston's 6X.018s

A1000 LP and a billet S475/87/.90

Looking for 850+ on fuel. Very optimistic seeing your results. I'll post mine here when it's up and going.
I can't recall off the top of my head.. I want to say 26° but don't quote me. Good luck, you should have no issues. Keep me updated.

Sent from my XT1254 using Tapatalk
__________________
02 dodge ecsb. To have fun with.
01 dodge ecsb. To tow the 02 with.

Thanks to Mumau diesel
 
Old 09-02-2015, 11:53 AM   #18
mathews8pt

Name: mathews8pt
Title: Too Much Time
Status: Not Here
Join Date: May 2009
Location: central ohio
Member`s Gallery
Posts: 2,269
My setup is running really well, just don't have any numbers yet. Need to put a bar in before heading to the track. Probably won't make it this year but might get it on the dyno.


Sent from my iPhone using Tapatalk
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single
 
Old 11-22-2015, 07:51 PM   #19
Show35
 
Show35's Avatar

Name: Show35
Title: Cummin apart
Status: Not Here
Join Date: Mar 2015
Location: Pa
Member`s Gallery
Posts: 26
p pump 24

I'm running 6/15 sticks, with a t4 s475 .90, with a benched pump, hamilton cam and o ringed, with 3 piece manifold
__________________
11 f350 6.7 powerstroke, mini max, deleted, mpd turbo kit, 15 pump

99 dodge 2500 cummins, dedicated 2.6 puller "Cummin Apart"
 
Old 11-22-2015, 08:52 PM   #20
CSnyder
 
CSnyder's Avatar

Name: CSnyder
Title: Snyder-Motorsports
Status: Not Here
Join Date: Mar 2008
Member`s Gallery
Posts: 6,278
Quote:
Originally Posted by Snedge View Post
I miss that truck.
its for sale.

Click the image to open in full size.
__________________
Alot of my life is easier thanks to Mumau Diesel! and Goerend Transmission

There is a HUGE difference between cocky and confident when it comes to engine building.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:25 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com