Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Vendor Row > Sponsor Forums > Forced Inductions
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 07-07-2011, 03:57 PM   #1
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
ForcedInductions/Garrett Billet Thumpers

Hey guys we have the 6 blade design Billet High PR Thumpers now ready to go. We are making them from 88mm -115mm in Billet. All wheels are designed for max pressure and flow, with slimmed hub lines. We can build them with Non-MWE and with MWE covers for the class rule guys. This is the next level up from the GT55, S500, S510 series units. A lot more power and a lot less drive pressure. Turbine wheels are 130mm.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook

Last edited by DRTurbo; 07-07-2011 at 04:11 PM.
 
Old 07-07-2011, 04:32 PM   #2
TMONEYDIESEL
 
TMONEYDIESEL's Avatar

Name: TMONEYDIESEL
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Jan 2007
Member`s Gallery
Posts: 8,706
PM me a price Jose
__________________
MANNING MOTORSPORTS
Office +1 (512) 217-7644

YOUR SOURCE FOR:
Camshafts
Pushrods
Valve springs
Custom Turbos
Exhaust Manifolds
Carrillo Connecting rods
 
Old 07-07-2011, 04:40 PM   #3
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by TMONEYDIESEL View Post
PM me a price Jose
No prob....
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 07-07-2011, 05:03 PM   #4
Freezingsystems
 
Freezingsystems's Avatar

Name: Freezingsystems
Title: Modify Everything
Status: Not Here
Join Date: Jan 2010
Location: Chesterton, IN
Member`s Gallery
Posts: 1,130
Jose,

How does a thumper turbine flow with a G-trim wheel say using a 1.0 and 1.32 housings as a atmosphere turbo compared to a S400 with say a commone 96 wheel with a 1.32 housing if this makes sense. Heavy fuel lots of drive available how would it compare using a 1.0 housing with a G-trim thumper based versus S400 with a 1.0?

Thanks Chris
 
Old 07-07-2011, 05:44 PM   #5
RonA
 
RonA's Avatar

Name: RonA
Title: Too Much Time
Status: Not Here
Join Date: Feb 2008
Location: Liberal ground zero.
Member`s Gallery
Posts: 11,053
This isn't a wheel upgrade for a gt55, it's a whole new charger?
__________________
55 years of work and all I got was a T-shirt.
 
Old 07-07-2011, 05:47 PM   #6
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by Freezingsystems View Post
Jose,

How does a thumper turbine flow with a G-trim wheel say using a 1.0 and 1.32 housings as a atmosphere turbo compared to a S400 with say a commone 96 wheel with a 1.32 housing if this makes sense. Heavy fuel lots of drive available how would it compare using a 1.0 housing with a G-trim thumper based versus S400 with a 1.0?

Thanks Chris
Chris, the S400 turbine with 1.32A/R housing flows around 63-65lbs/min max.....or in other words will support about ~138lbs/min max om compressor side.

The Thumper units with the big turbines (F and G) will flow alot more. The G-trim with a 1.00A/R flows 87lbs/min, or support about 186lbs/min of air. Big difference. With a 1.32 it jumps up over to 92lbs/min, or support about 197lbs/min, or 2860CFM on the compressor side
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 07-07-2011, 05:48 PM   #7
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by RonA View Post
This isn't a wheel upgrade for a gt55, it's a whole new charger?
Yes sir its a whole new charger. Unit will basically drop into a footprint of a GT55.
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 07-07-2011, 06:29 PM   #8
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
For the ones asking.....The wheels that are available are:

88
91
94
98
102
106
115

All in 6 blade HP Billet design.
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 07-07-2011, 08:49 PM   #9
Freezingsystems
 
Freezingsystems's Avatar

Name: Freezingsystems
Title: Modify Everything
Status: Not Here
Join Date: Jan 2010
Location: Chesterton, IN
Member`s Gallery
Posts: 1,130
Quote:
Originally Posted by DRTurbo View Post
Chris, the S400 turbine with 1.32A/R housing flows around 63-65lbs/min max.....or in other words will support about ~138lbs/min max om compressor side.

The Thumper units with the big turbines (F and G) will flow alot more. The G-trim with a 1.00A/R flows 87lbs/min, or support about 186lbs/min of air. Big difference. With a 1.32 it jumps up over to 92lbs/min, or support about 197lbs/min, or 2860CFM on the compressor side
Thanks a bunch I will be talking with you shortly.
 
Old 07-08-2011, 02:04 PM   #10
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by Freezingsystems View Post
Thanks a bunch I will be talking with you shortly.
No problem...anytime
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 07-09-2011, 12:38 PM   #11
matt05

Name: matt05
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2008
Member`s Gallery
Posts: 166
Mind pming me some pricing on a 94mm?
 
Old 07-11-2011, 01:38 PM   #12
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by matt05 View Post
Mind pming me some pricing on a 94mm?
PM sent...
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 08-03-2011, 01:43 PM   #13
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
For those that have asked.....a cast 106 thumper is available. Here is a pic of one of the members on here.... That is beside an S400SX we built, so you can see the size comparison.

Click the image to open in full size.
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 08-04-2011, 03:24 PM   #14
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Guys, for those that have sent PM's and called, we are working on a new larger turbine wheel then even the G-trim. Its in development now and will be another 2-3 months before we release the turbine wheel. Testing has to go into this before we can release it to the public.

Thanks for your patience
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Old 08-09-2011, 05:45 PM   #15
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Our friends across the border in Canada are kicking some tail with the billet thumpers. They have been testing them for us for quite sometime, Dave is in the left lane (right to viewers) on both runs......enjoy.

__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook

Last edited by DRTurbo; 08-09-2011 at 05:47 PM.
 
Old 08-09-2011, 06:10 PM   #16
Joesixpack
 
Joesixpack's Avatar

Name: Joesixpack
Title: Pull'n it.
Status: Not Here
Join Date: Apr 2008
Member`s Gallery
Posts: 4,118
I need one of those!!! Not sure for what yet.
__________________
Basically stock if I would have built it at the factory.....
 
Old 08-09-2011, 07:35 PM   #17
emiller3
 
emiller3's Avatar

Name: emiller3
Title: Too Much Time
Status: Not Here
Join Date: Mar 2009
Location: Lake Charles,LA.
Member`s Gallery
Posts: 614
Nice pic there^^^
__________________
Everett. KCCO
07 lbz,ccsb,4wd
EED,TTS ,Danville,PPE,RDL,
Calvins,BT,F1,& Driveway
11.08@127.86mph

02 lb7,sclb,4wd
Waiting on a transplant
 
Old 08-09-2011, 08:49 PM   #18
bsmith
 
bsmith's Avatar

Name: bsmith
Title: Never enough
Status: Not Here
Join Date: Jul 2008
Location: la
Member`s Gallery
Posts: 3,966
Why the hell don't we have races like that? That's freakin sweet!
__________________



RIP DEX

2001 2500 2wd
Diesel pro's cam
Walbro 392
Goff diesel injection
160hp pump
6x.013's by Weston
HTT 62/71/13 over FI 82/92/1.10
Levi's turbo blankets!
 
Old 08-09-2011, 10:25 PM   #19
Jim Fulmer
 
Jim Fulmer's Avatar

Name: Jim Fulmer
Title: Too Much Time
Status: Not Here
Join Date: May 2006
Location: Quanah Tx.
Member`s Gallery
Posts: 5,013
Quote:
Originally Posted by DRTurbo View Post
For those that have asked.....a cast 106 thumper is available. Here is a pic of one of the members on here.... That is beside an S400SX we built, so you can see the size comparison.

Click the image to open in full size.
I know one on here too, that is some sick air and good drive pressures.

Jim
__________________
01' 12V, S/B, Q/C, 4WD
98' 12V, S/B, Q/C, 2WD
 
Old 08-10-2011, 10:30 AM   #20
DRTurbo

Name: DRTurbo
Title: Turbocharger Engineer
Status: Not Here
Join Date: Sep 2010
Member`s Gallery
Posts: 867
Quote:
Originally Posted by emiller3 View Post
Nice pic there^^^
The man himself......don't like to mention names with turbos unless told. Had a few that don't want anyone to know what they have.....lol....especially the wife.
__________________
---------------------------------------
Forced Inductions
1-(256)-796-1230
Authorized Distributor:
Garrett
Borg Warner
Holset
Mitsubishi
IHI


Click here and Like us on Facebook
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:13 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com