Door hinges

[RockinRam96]

Looks like I need to replace the bushing in my drivers side door hinge. Question is, can I drive the pin out and put a new hinge in? Or do I need to put an entire hinge on?




Sent from my iPhone using Tapatalk

[95cummins5.9]

Pins. Look up the site clips and fasteners. They sell a grade 8 bolt with a oversized bushing.

[RockinRam96]

Originally Posted by 95cummins5.9

Pins. Look up the site clips and fasteners. They sell a grade 8 bolt with a oversized bushing.

Thanks for the lead.

However, their site is very difficult to navigate. The only think I found for a Dodge was by searching. All I found was the pin below, which from the description, sounds like a replacement for the hinge pin. I really only need to replace the pin and busing for the roller arm (see my photo).

This is what I found. http://www.clipsandfasteners.com/Dod...t-p/a20544.htm

Can I just grind off the ends of the pin, and replace with a bold and busing?

[95cummins5.9]

Ya i figured you meant hinge pins. Im no help on the roller arm and bushing.