Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Dodge Competition and Performance General Dodge Competition and Performance Discussion |
05-29-2017, 11:12 PM
|
#1
|
Name: M249cummins
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2017
Member`s Gallery
Posts: 157
|
filled block characteristicts driving?
I plan to put a create type of block filler in my 12v 5.9 and was wondering it's driving operations? I plan to fully fill the block water jackets with Hard Blok but how will/does it operate with no water? I may run water in the head but unsure at the moment but I am wondering how long can it run? I hear people running days/DDing their vehicle with filled blocks. others say if the oil stays cool you are fine, others say more than 3 miles the cylinders will warp????
Can some of this be clarified by people with first hand experience please. How do you drive yours?
Do not reply if you know how your friends drives or someone you know or you heard of please...
|
|
|
05-30-2017, 06:58 AM
|
#2
|
Name: dieselbeef
Title: dick doggin
Status: Not Here
Join Date: Jul 2007
Location: myakka city florida
Member`s Gallery
Posts: 9,841
|
why do this?
__________________
02 quad cab 4x4 aluminum flatbed 63/68/14 hrvp INJ by weston 4.10 gorend/suncoast method race
01 2500 4x4 quad cab all stock/drag comp
07.5 3500 4x4 dually 4 dr 6.7 d&j extreme, fleece cheetah, gorend triple, cat filters,
rip wrongway...
|
|
|
05-30-2017, 07:50 AM
|
#3
|
Name: Snedge
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Sep 2006
Location: Western Pa.
Member`s Gallery
Posts: 18,832
|
The block will die.
|
|
|
05-30-2017, 07:56 AM
|
#4
|
Name: CorneliusRox
Title: Seasoned Rookie
Status: Not Here
Join Date: Dec 2012
Location: Detroit, MI
Member`s Gallery
Posts: 4,154
|
I think the people saying they can get away with DDing it are doing a half fill. I don't know anyone with a fully filled block that expects it to spend any time on the road.
__________________
Corey - BSME '21 Tesla Model 3 Perf
'22 DMax AT4 2500
|
|
|
05-30-2017, 08:34 AM
|
#5
|
Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,821
|
Warpage is an absolute certainty. How much is the question.
There was an excellent video from ford of the heat produced in a dry cylinder block. I can't find it now.
The top end of the cylinder should have coolant circulation for DD IMO
Sent from my XT1575 using Tapatalk
__________________
Check out @bdmaximusworx
05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
|
|
|
05-30-2017, 08:59 AM
|
#6
|
Name: Financial Mistake
Title: Too Much Time
Status: Not Here
Join Date: Apr 2017
Member`s Gallery
Posts: 278
|
Guys need to lay off the UCC kool-aide...
You don't NEED a 1500hp+ "street" truck. I definitely don't even WANT one.
Get behind the wheel of an 800-1000hp truck on asphalt and let it scare the bahjeezus out of you.
Even with a mild 13mm and biggish compounds, you're not going to making enough power to split the block, and you'd BARELY be streetable, To the point that it would be obnoxious/stressful to drive for more than 30 minutes at a time.
I'd focus more on making power you can actually use...
Sent from my iPhone using Tapatalk
__________________
P24V, Billet 62/68/14, Billet 475/96/1.32, 27°, Seth's Stg 3 @ 450cc, dual feed, DFI 7x12, Fass240, 110#, 425, p&p/3 angle/oring, ED freeze plugs, BD IC, VP MAX boots, stainless mani, Snow w/m, coolant bypass, CTS2, EAS, POS NV4500, valair quiet dual ceramic
|
|
|
05-30-2017, 09:13 AM
|
#7
|
Name: dieselbeef
Title: dick doggin
Status: Not Here
Join Date: Jul 2007
Location: myakka city florida
Member`s Gallery
Posts: 9,841
|
still aint heard why.
__________________
02 quad cab 4x4 aluminum flatbed 63/68/14 hrvp INJ by weston 4.10 gorend/suncoast method race
01 2500 4x4 quad cab all stock/drag comp
07.5 3500 4x4 dually 4 dr 6.7 d&j extreme, fleece cheetah, gorend triple, cat filters,
rip wrongway...
|
|
|
05-30-2017, 09:55 AM
|
#8
|
Name: M249cummins
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2017
Member`s Gallery
Posts: 157
|
Its not going on the street. its a trailered truck that will be in the open/rwyb class at local pulls. solid suspension, gutted interior, horrible gear ratios. I have no desire to drive it on the street. I will be around 1,000hp and plan to run a massive single and spin a lot of rpms. it was my understanding filling the block keeps distortion and flex down.
I'm just curious if you are in the pits, staging, unloading ect...how much driving can it handle?
|
|
|
05-30-2017, 09:57 AM
|
#9
|
Name: M249cummins
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2017
Member`s Gallery
Posts: 157
|
its suppose to be off to the machine shop this week and was just wondering is all
|
|
|
05-30-2017, 09:59 AM
|
#10
|
Name: Valair1
Title: Valair Inc. Clutch
Status: Not Here
Join Date: Jul 2008
Location: Crowley Texas
Member`s Gallery
Posts: 2,498
|
Seems like most folks with filled blocks have water injection or a water to air IC. that helps to keep the oil temps down.
|
|
|
05-30-2017, 10:39 AM
|
#11
|
Name: 08cumminssmoke
Title: Too Much Time
Status:
Here
Join Date: Dec 2012
Location: West Virginia
Member`s Gallery
Posts: 693
|
Quote:
Originally Posted by M249cummins
Its not going on the street. its a trailered truck that will be in the open/rwyb class at local pulls. solid suspension, gutted interior, horrible gear ratios. I have no desire to drive it on the street. I will be around 1,000hp and plan to run a massive single and spin a lot of rpms. it was my understanding filling the block keeps distortion and flex down.
I'm just curious if you are in the pits, staging, unloading ect...how much driving can it handle?
|
How big of a single?
We tow ours around 95% of the pulls we go to unless we get there early enough to scale and drive to the staging lane. Like you said above, oil cooling is the most important part.
Sent from my iPhone using Tapatalk
__________________
2015 6.7 G56 Tow Rig
97 puller
|
|
|
05-30-2017, 11:32 AM
|
#12
|
Name: jimbo486
Title: Too Much Time
Status: Not Here
Join Date: Jan 2010
Location: Orange County, CA
Member`s Gallery
Posts: 1,617
|
I'd like to think anybody with a partially- or fully-filled block has also plumbed some sort of oil cooler to control temps. However, the need for a cooler might depend on the duration of runtime and of downtime between passes/runs. I have no firsthand experience or knowledge.
__________________
1990 Dodge D350
Giles' 12mm VE - Airdog II 165 - 370s @ 75lpm - BW S362fmw/68/12 - Hamilton 182/214 - '01 NV5600
|
|
|
05-30-2017, 01:46 PM
|
#13
|
Name: IdahoRob
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Apr 2006
Member`s Gallery
Posts: 2,337
|
I run a half filled block (up to the freeze plugs) but it is a duramax. No problem driving it around the pits and hot lapping it. No oil cooler, I monitor oil temps and never have seen an issue. Again, this is a duramax so might not be comparable. I'm running an air to air intercooler.
I don't have experience with a totally filled block.
|
|
|
05-30-2017, 01:54 PM
|
#14
|
Name: 9724VF350
Title: Tractor Guy
Status: Not Here
Join Date: Mar 2010
Location: Northeast Ohio
Member`s Gallery
Posts: 2,784
|
Shortbusdriver says he took his filled block on a 2 hour road trip and it was just fine. Cooled head if I remember right.
__________________
97 F350 4X4 CC Dually 5spd 24V 913 S300/HT3B Ranch Hand.
Playtoy-Oliver 1655. 12V now , 13mm, S475
Wife's ride-03 Excursion 12V swap in the works.
|
|
|
05-30-2017, 02:03 PM
|
#15
|
Name: M249cummins
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2017
Member`s Gallery
Posts: 157
|
Quote:
Originally Posted by Valair1
Seems like most folks with filled blocks have water injection or a water to air IC. that helps to keep the oil temps down.
|
I have 2 type 17 air water intercoolers and plan to run a oil cooler of some sort. It will be a full block fill.
Even considered running water through the head.
|
|
|
05-30-2017, 04:44 PM
|
#16
|
Name: Snedge
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Sep 2006
Location: Western Pa.
Member`s Gallery
Posts: 18,832
|
Quote:
Originally Posted by 9724VF350
Shortbusdriver says he took his filled block on a 2 hour road trip and it was just fine. Cooled head if I remember right.
|
Just because it did not swell a piston to the point of lockup, I have to say that damage was done on the road trip.
|
|
|
05-30-2017, 09:56 PM
|
#17
|
Name: bigstacks95
Title: Diesel Doc
Status: Not Here
Join Date: Jul 2008
Location: Falls Village, CT
Member`s Gallery
Posts: 2,030
|
Three seasons on a filled block. Would highly recommend it. I'll never go back.
Reason one: It eliminates your cooling system and all related possible issues (leaks, water pump failures, air pockets, boiling over)
Reason two: It doesn't get nearly as hot as people think. I can drive all around the pits without the oil temp guage rising. I use a nice Derale oil cooler with a petersen relief valve. The temp guage will rise to aprox. 180-200 after a pull depending on the length of the pull, how long they make me sit hooked to the sled, track prep, how many times I started it in the pit, etc.
Reason three: Its stronger (theoretically) Not that I'm remotely close to that HP level with the blocks start to split, but its piece of mind.
Reason four: It opens up the front of the engine bay for a larger intercooler with better mounting
Reason five: It gives you a good reason to b!tch at the officials and make them tow you around the pits.
__________________
--Dave--
58 Dodge Power Wagon 3.0 Limited Pro Stock diesel pulling truck
2020 Ram 3500 HO/Aisin Laramie/night tow rig
|
|
|
05-31-2017, 05:41 AM
|
#18
|
Name: zstroken
Title: For $$$ your name here
Status: Not Here
Join Date: Sep 2006
Location: Western Michigan(by the lake)
Member`s Gallery
Posts: 23,151
|
Quote:
Originally Posted by bigstacks95
Three seasons on a filled block. Would highly recommend it. I'll never go back.
Reason one: It eliminates your cooling system and all related possible issues (leaks, water pump failures, air pockets, boiling over)
Reason two: It doesn't get nearly as hot as people think. I can drive all around the pits without the oil temp guage rising. I use a nice Derale oil cooler with a petersen relief valve. The temp guage will rise to aprox. 180-200 after a pull depending on the length of the pull, how long they make me sit hooked to the sled, track prep, how many times I started it in the pit, etc.
Reason three: Its stronger (theoretically) Not that I'm remotely close to that HP level with the blocks start to split, but its piece of mind.
Reason four: It opens up the front of the engine bay for a larger intercooler with better mounting
Reason five: It gives you a good reason to b!tch at the officials and make them tow you around the pits.
|
Three reasons eh?
__________________
2008 4x4 Megacab, 68RFE
97 Dodge gone....
24V P-Pump Mafia member #1(retired)
Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!
|
|
|
05-31-2017, 06:43 AM
|
#19
|
Name: bigstacks95
Title: Diesel Doc
Status: Not Here
Join Date: Jul 2008
Location: Falls Village, CT
Member`s Gallery
Posts: 2,030
|
Quote:
Originally Posted by zstroken
Three reasons eh?
|
Read again. I said three SEASONS on a filled block
__________________
--Dave--
58 Dodge Power Wagon 3.0 Limited Pro Stock diesel pulling truck
2020 Ram 3500 HO/Aisin Laramie/night tow rig
|
|
|
05-31-2017, 09:43 AM
|
#20
|
Name: M249cummins
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jan 2017
Member`s Gallery
Posts: 157
|
Quote:
Originally Posted by bigstacks95
Read again. I said three SEASONS on a filled block
|
May I ask you some questions about your setup? I can pm if preferred.
What material did you fill your block with?
Do you run water in the head, how is it plumbed, radiator?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:45 AM.
|