Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 2007.5-2013 6.7L
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 02-18-2019, 11:35 AM   #1
cerickson
 
cerickson's Avatar

Name: cerickson
Title: fullpull108
Status: Not Here
Join Date: Feb 2011
Location: sw mo
Member`s Gallery
Posts: 1,071
5 inch exhaust clamp

Got in my truck yesterday. Took off driving and heard a horrible noise. Like my exhuast was dragging. Got out and looked underneath the rear of the truck. I mysteriously lost my 5 inch clamp on my flo pro exhaust. It's the clamp that is on my straight pipe. I have a fleetpride local to me. Which style of clamp am I needing? Is it a butt or lap joint? Thanks in advance
__________________
Chad

Mine: 2008 Dodge 3500 megacab 4x4 drw 6 SPD stick. Anarchy EFI, Flo Pro egr delete, 5" straight pipe, Edge cts2

Wifes: 2006 Dodge 3500 megacab 4X4 drw goerend auto, 4 inch straight pipe, S&B cai, FASS 150 pump, EFI live by Anarchy

Last edited by cerickson; 02-18-2019 at 11:37 AM.
 
Old 02-18-2019, 03:06 PM   #2
coorsman2005
 
coorsman2005's Avatar

Name: coorsman2005
Title: i like beer
Status: Not Here
Join Date: Jun 2011
Location: blackwell,ok
Member`s Gallery
Posts: 784
All the flow pros i have installed slip together so it would be a lap joint. If both peices are same size and neitehr is flared which i doubt. That would be a but joint
__________________
08 3500 qcsb 6.7 6 speed manual, valair DD, all deletes efi live, arp studs&rocker studs, Vulcan hg w/orings, max spool valve springs, max spoolpush rods, SB66.
2008 megacab 4x4 dually 12v build in progress
1990 2wd d100 4bt nv5600 vailair single disk in progress
 
Old 02-18-2019, 03:36 PM   #3
cerickson
 
cerickson's Avatar

Name: cerickson
Title: fullpull108
Status: Not Here
Join Date: Feb 2011
Location: sw mo
Member`s Gallery
Posts: 1,071
Thanks. Still can't figure out where the clamp went. Wouldn't think it could just fall off
__________________
Chad

Mine: 2008 Dodge 3500 megacab 4x4 drw 6 SPD stick. Anarchy EFI, Flo Pro egr delete, 5" straight pipe, Edge cts2

Wifes: 2006 Dodge 3500 megacab 4X4 drw goerend auto, 4 inch straight pipe, S&B cai, FASS 150 pump, EFI live by Anarchy
 
Old 02-18-2019, 05:04 PM   #4
RacinDuallie
 
RacinDuallie's Avatar

Name: RacinDuallie
Title: Black Sheep Racing
Status: Not Here
Join Date: Apr 2006
Location: Supporting Northeast Diesel Racing
Member`s Gallery
Posts: 17,369
Can you slap a band clamp on it?
__________________
 
Old 02-18-2019, 05:20 PM   #5
cerickson
 
cerickson's Avatar

Name: cerickson
Title: fullpull108
Status: Not Here
Join Date: Feb 2011
Location: sw mo
Member`s Gallery
Posts: 1,071
Yes I can. I can get band, lap or butt clamp from the local fleet pride. Just wanting to get the right one. Another question. I have had to tighten the old clamps a couple times before. Should I clamp it and booger up the threads when its tight so it dont loosen up again. Or just slap band on drive it to the local exhaust shop and have them weld it all up tight.
__________________
Chad

Mine: 2008 Dodge 3500 megacab 4x4 drw 6 SPD stick. Anarchy EFI, Flo Pro egr delete, 5" straight pipe, Edge cts2

Wifes: 2006 Dodge 3500 megacab 4X4 drw goerend auto, 4 inch straight pipe, S&B cai, FASS 150 pump, EFI live by Anarchy
 
Old 02-18-2019, 06:53 PM   #6
Mark Nixon
 
Mark Nixon's Avatar

Name: Mark Nixon
Title: No Savior among the flesh
Status: Not Here
Join Date: Feb 2009
Location: Brownville, Nebraska
Member`s Gallery
Posts: 8,676
Don't booger, double nut.

Mark.
__________________
If you or I did business like the PEOPLE in government do business, we'd be put in jail. Government is coercive.
Anarchy: The state of existence where there are no masters & no slaves. Therefore, Anarchy means the ABSENCE OF SLAVERY, or, in other words, FREEDOM.
 
Old 02-18-2019, 06:57 PM   #7
zstroken
 
zstroken's Avatar

Name: zstroken
Title: For $$$ your name here
Status: Not Here
Join Date: Sep 2006
Location: Western Michigan(by the lake)
Member`s Gallery
Posts: 23,151
Quote:
Originally Posted by Mark Nixon View Post
Don't booger, double nut.

Mark.



I concur!
__________________
2008 4x4 Megacab, 68RFE
97 Dodge gone....
24V P-Pump Mafia member #1(retired)

Thanks to Mumau Diesel, Goerend Transmission, Northeast Diesel Service!
 
Old 02-18-2019, 08:39 PM   #8
coorsman2005
 
coorsman2005's Avatar

Name: coorsman2005
Title: i like beer
Status: Not Here
Join Date: Jun 2011
Location: blackwell,ok
Member`s Gallery
Posts: 784
I agree with said above. Double nut. I recommend not welding it. I cut mine to put stacks. Then when i went back normal i welded it all and its all cracking out like every direction you could imagine.
__________________
08 3500 qcsb 6.7 6 speed manual, valair DD, all deletes efi live, arp studs&rocker studs, Vulcan hg w/orings, max spool valve springs, max spoolpush rods, SB66.
2008 megacab 4x4 dually 12v build in progress
1990 2wd d100 4bt nv5600 vailair single disk in progress
 
Old 02-18-2019, 10:00 PM   #9
cerickson
 
cerickson's Avatar

Name: cerickson
Title: fullpull108
Status: Not Here
Join Date: Feb 2011
Location: sw mo
Member`s Gallery
Posts: 1,071
Thanks for all the help guys.
__________________
Chad

Mine: 2008 Dodge 3500 megacab 4x4 drw 6 SPD stick. Anarchy EFI, Flo Pro egr delete, 5" straight pipe, Edge cts2

Wifes: 2006 Dodge 3500 megacab 4X4 drw goerend auto, 4 inch straight pipe, S&B cai, FASS 150 pump, EFI live by Anarchy
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:00 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com