DISTURBED
YEA WE RIDE THE SHORT BUS
Considering they have an in house machine shop. Isn't that fault in their workmanship? They didn't check it over properly
Where was it leaking?
Considering they have an in house machine shop. Isn't that fault in their workmanship? They didn't check it over properly
I'm not a machine shop but I'm not sure how they would check that. Only way I can think is once its on the engine and your running it and building cylinder pressure. Shop air is only 100-150 psi. Cylinder pressure is probably 5-6000 psi. How long after you got it back did it start showing issues? If it ran fine then started then the head were fine then developed the issue.
If its not a know common failure how would they know they need to be checked? I bet they check them from now on but if i had a set of brand new heads from ford, the thought would have never crossed my mind that the glow plug bungs could possibly leak. I've been in the diesel world for a while and this is the first time I've ever heard of this happening.
:doh:
U have the worst luck girl. If u were closer I would do the heads for beer $$. Hope everything turns out good
Sorry to hear. It will get better hun.