Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Dodge Products Dodge PARTS ONLY!! |
01-22-2011, 04:44 PM
|
#1
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
Built 12V Cummins Motor with 13mm Scheid Pump
1994 12V IH Block and Head. This is the motor out of my big truck that was the first to break 1300 hp.
Scheids Parts:
14mm head studs
Drag Cam
24V tappets
HD Push Rods
14mm Main studs
HD Rod Bolts
Block Stiffener
Scheid shot peened marine rods
13mm Scheid race pump 1200cc capable 5500 rpms (bought from Kevin Cole)
60 lb springs, hardened retainers and keepers
Billet front cover with cam support bearing
Other parts and info:
.093 Lines
.020 over Mahle fly cut pistons with total seal rings (stock bowl)
Head has larger intake valves ported and polished (flows same as a 24v head)
Crank and rod/pistons assemblies balanced.
Motor has less than 1000 miles since freshened put down 796 on fuel only and drove back from Indy and discovered the head was cracked from the 1374 hp run before the freshen. (puffed white smoke when decelerated)
Pulled motor and threw in a spare, been waiting on the hamilton diesel or indy head to throw on it and stick it back in. Now I have some other conversion projects in mind plus want to build a new pole barn.
As it sits $7320 or with a fresh cnc ported and polished head on it $8500
Also have the dual feed 5 x .018 injectors but they are in the current motor in the truck.
I would also sell the twins that fit a ford conversion as well. S362 13cm SS over S483 1.32 AR (I think) with a 50mm external ED gate and 5" intake air shut off. $4650
Go to my below photobucket page for pics, or to my youtube page for vids. This motor is just insane on the street. Had plenty of fun with it and a reckless driving ticket (basically feels like you are on ice all the time).... just moving on and changing interests.
Superduty Cummins pictures by RedStroke - Photobucket
http://www.youtube.com/my_videos?feature=mhum
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
01-22-2011, 07:40 PM
|
#2
|
Name: Randall12v
Title: ...
Status: Not Here
Join Date: Nov 2006
Location: Quad Cities, IL.
Member`s Gallery
Posts: 2,396
|
pm sent
__________________
'04.5 Chevy 2500, 4x4, RCLB, LLY
'97 Dodge 3500 SRW, 4x4, 12v SOLD
|
|
|
01-22-2011, 09:19 PM
|
#3
|
Name: kino_fab
Title: KTPA Tech Official
Status: Not Here
Join Date: Aug 2007
Location: Glasgow, Ky
Member`s Gallery
Posts: 2,244
|
dang i wish i had the money for this setup!!! Bump for a heck of a price. Seen this truck in action at the TS 08 Open house on the 1300hp run. This probably won't last long guys!!!
__________________
04.5 3500 daily driver/ex-sled puller - On the operating table
Tech Official for:
|
|
|
01-23-2011, 08:16 AM
|
#4
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
PM returned. Thanks for the positive words, that was a fun day!
http://www.youtube.com/watch?v=M4OdnSDUJHo
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
Last edited by Red Stroke; 01-23-2011 at 08:18 AM.
|
|
|
01-23-2011, 05:50 PM
|
#5
|
Name: cummins-dodge
Title: Too Much Time
Status: Not Here
Join Date: Jan 2011
Location: IL
Member`s Gallery
Posts: 277
|
pm sent where are you located
01 dodge quad cab 5spd 280000 miles cold air intake afe, cooler tubz, duel electric fans, airdog 150, edge juice att. hot unlock, industrial injection dragon fire pump, .093 connector tubes, .093 lines, ats head studs, 300 hp injectors 7x16 , s400 turbo and s300 twins, custom billet intake plate, cooling mist water meth injection, valair twin disc clutch 3850lb, 1 3/8 input shaft, south bend upgrade hydraulics, duel 6 inch aussy stacks, 4 inch lift, eagle alloys, 35x12.50x16.5 bfg's, ranch hand front and rear bumpers, valair on board air with Siberian express train horns,
Pulling stats.
Hanks 4x4 3rd 282.56ft
01 dodge reg cab 5spd 279000 miles cold air intake afe, cooler tubz, single electric fan or I can put the stock clutch fan on, air dog 150 new 1 month old, stainless steal nerf bars, edge juice att. hot unlock, .093 connector tubes, valair single disc clutch, 4inch from turbo to duel 5 inch miter stacks, leveling kit, American racing wheels, 33x12.50x16.5 bfg's, ranch hand front and rear bumpers for sale
84 Chevy k30 reg cab with 94 12v p pump Cummins and nv4500 trans 205 transfer case 3 inch body lift, 6 inch suspension lift, 36x14.5x16.5 parnelli jones dirt grips, 16.5x12 weld scorpio wheels, dana 60 front, duramax rear axle, duramax intercooler, schied custom injection pump, RQV gov., 370 injectors that are extrude honed bigger, o- ringed and head stud, milled off intake, sbc valve springs titanium keepers and retainers, port and polish head, marine lift pump, custom ground cam, cooling mist water meth. injection, valair twin disc clutch 3850lb, 1 3/8 input shaft, valair hydraulic upgrade, industrial injection silver bullet 66 turbo, no fuel plate, .093 polish stainless steel fuel lines, aluminum radiator, single 5 inch miter cut stack
Pulling stats
Hanks 4x4 7th 256ft broke
03 Honda Rincon 650 1500 miles with 2 inch lift, 27 mudzillas, 1 1/2” rear wheel spacers, 1 inch front wheels spacers, hmf pipe, dynatek cdi, dynatek coil, k&n air filter, rejeted 170 main, spring clipped 8 coils, 5000 lb winch, heated grips, 14% gear reduction, 2 inch snorkel
95 Yamaha warrior 350 bored out to 366, stage 2 hot cam, JE 85mm piston 12.5:1 compression, new rod, k&n air filter, white bros. pipe, bigger coil, performance cdi box, nerf bars, oil cooler mod, full skid plates, heavy duty racing clutch, jetted
07 Kawasaki klx250 on off road bike moose air filter, fmf pipe mostly stock
Member stats
diesel bombers
the diesel garage
Cummins forum
competition diesel
nyrok’s
atv connection
Last edited by cummins-dodge; 01-23-2011 at 05:52 PM.
|
|
|
01-23-2011, 06:30 PM
|
#6
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
PM returned.
Motor is located in Remus MI.
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
01-31-2011, 02:10 PM
|
#7
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
Quote:
Originally Posted by Big12Valve
pm sent
|
You have another PM
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
02-02-2011, 08:34 AM
|
#8
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
1 st guy wrecked his truck that he was gonna put this in.
Also had a request to seperate pump and front cover from motor..
Motor with cracked head minus pump, hub and cover. $4300
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
02-02-2011, 12:18 PM
|
#9
|
Name: Supersingle
Title: Diesel Enthusiast
Status: Not Here
Join Date: Jun 2008
Location: Houston, TX
Member`s Gallery
Posts: 194
|
This motor will lay it down! Bump for a good guy!
__________________
98' 12V, Plate, DDP Sticks, Laser Cut DVs, HX-40, DTT Tranny, Remus Traction Bars, Single 6" Miter Cut Stack, Manual TC Lock-Up Switch, of course.
04' Common Rail, TST PMCR, Bully Dog Power Pup, AFE Intake, ATS Arc Flow, Stage V ATS Tranny, ATS Trans. Command
C-Power!
|
|
|
02-02-2011, 07:36 PM
|
#10
|
Name: cumminslow
Title: Too Much Time
Status: Not Here
Join Date: Nov 2008
Location: at the shop
Member`s Gallery
Posts: 716
|
that is good price ,i wish i had the cash
|
|
|
02-06-2011, 08:37 PM
|
#11
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
Bump..
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
02-23-2011, 09:23 PM
|
#12
|
Name: BTO86
Title: HDDP
Status: Not Here
Join Date: Jan 2008
Location: Jacksonville IL
Member`s Gallery
Posts: 300
|
pm sent
|
|
|
02-26-2011, 08:40 AM
|
#13
|
Name: Red Stroke
Title: Too Much Time
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 1,087
|
Sorry back to keeping this as one package..
__________________
White 01 Superduty, Ex-Cab SB, 4x4, Built 12V Cummins, HTS Billet 47RH, 8" Stack, 796 HP 1300 ft/lbs #2, 1374 HP 2500+ ft/lb on the gas.
What you don't measure, you can't control. What you can't control-you can't improve.
|
|
|
02-26-2011, 10:29 AM
|
#14
|
Name: tarter6bt
Title: broke ass
Status: Not Here
Join Date: May 2010
Location: southern missouri
Member`s Gallery
Posts: 858
|
Pm sent
__________________
Andrew
94 dodge 3/4ton 4x4 5 spd. Built 2.5 motor
|
|
|
05-27-2011, 10:57 PM
|
#15
|
Name: gardenaplowboy
Title: Rookie
Status: Not Here
Join Date: Apr 2011
Location: touchet WA.
Member`s Gallery
Posts: 23
|
that was seriously the first 5.9 cummins to break 1300hp? wish i had the money.....
__________________
12v, #0 fuel plate, ats intake elbo, afe stage 2 intake sytem, spearco intercooler, t4 ats exhaust manifold, EMUSA hx40 turbo, 4" turbo back exhaust, south bend 550hp clutch, nv4500 :cbadge:
|
|
|
05-31-2011, 05:03 PM
|
#16
|
Name: B_Cummin
Title: Rookie
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 4
|
Do u still have the motor for sale?
|
|
|
05-31-2011, 05:46 PM
|
#17
|
Name: crabbelle
Title: Banned
Status: Not Here
Join Date: Dec 2007
Location: Baltimore,MD
Member`s Gallery
Posts: 2,795
|
yes, it is still for sale
|
|
|
06-01-2011, 07:14 PM
|
#18
|
Name: B_Cummin
Title: Rookie
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 4
|
crabbelle i am very interested do u know for sure if it is still for sale?
|
|
|
06-01-2011, 07:40 PM
|
#19
|
Name: TrailerHauler
Title: Green Behind the Ears
Status: Not Here
Join Date: Aug 2010
Member`s Gallery
Posts: 67
|
It is still for sale, PM him and I'll tell him to get on here.
__________________
99 F350 CC DRW
RIP Will Iott - "This ain't no practice run"
|
|
|
06-01-2011, 08:12 PM
|
#20
|
Name: B_Cummin
Title: Rookie
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 4
|
I just opened this account so it wont let me pm anyone till i have 10 or more counts can you have him email me at brentharris10@yahoo.com
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 07:31 AM.
|