Ppump 24v Motor Build Suggestions
1,000 can be done on a 366/484 with 6x18s on a stock bottom end, 1200 has been done on those chargers with a 1.0 housing on the secondary. just run a cam that supports power in the upper RPM and keep the power up high, out of the torque band. HP doesn't kill these engines, Torque does.
Sub to mid 10s are achievable with 900hp if you can cut out enough weight...
Why not take that 10k and put it into the chassis, drivetrain, and tires, and keep the engine simple but effective.
There's a lot more to Racing than just making a mess load of power.
Sent from my iPhone using Tapatalk
__________________
P24V, Billet 62/68/14, Billet 475/96/1.32, 27°, Seth's Stg 3 @ 450cc, dual feed, DFI 7x12, Fass240, 110#, 425, p&p/3 angle/oring, ED freeze plugs, BD IC, VP MAX boots, stainless mani, Snow w/m, coolant bypass, CTS2, EAS, POS NV4500, valair quiet dual ceramic
Last edited by Financial Mistake; 05-16-2017 at 09:38 PM.
|