Truckers, lets see your rigs! - Page 900 - Competition Diesel.Com

*zfaylor* · 07-20-2018, 11:00 AM

We literally threw our induction heater in the garbage. We had it replaced 2 times. It took an eternity to use. Had a guy interested in purchasing it. Went to show him that it worked, it didnt.

We really really like Kimball Midwest penetrating oil. Their CB+ is the best but it is honestly a bit too dangerous. It will strip paint instantly and is pretty hard on cuts and eyes. Their regular CB is still dammmmmnnnn good. Our favorite way is to heat the stud and not the nut. It sounds crazy but it works like a dream. We remove 50+ crusty rusty studs and bolts daily. Heat the bolt or the stud until red and keep the flame away to keep it red for a bit without melting it. Let it cool completely down and 9/10 times we barely have to put any effort in to loosen it. If they are severely stuck we get it all red hot and shove parafin wax into the joint.

chevota84 · 07-20-2018, 12:39 PM

Theres a guy on YouTube called projectfarm, he tests all kinds of things. A while back he did some tests on penetrating oil and I was really surprised how well wd-40 did. I've been a pb blaster guy for a long time but wd beat it almost every time. AvE did an episode on penetrants and had similar results.

Which Penetrating Oil is Best? Lets find out! - YouTube

Sent from my SM-G965U using Tapatalk

i-r-truckdriver · 07-20-2018, 04:18 PM

This is perfect timing. Just ordered the studs and hardware for our bxs. Have exhaust tick and found one stud is broke. Not exactly looking forward to that job.

JWhite · 07-20-2018, 06:15 PM

Quote:

Originally Posted by chevota84

Theres a guy on YouTube called projectfarm, he tests all kinds of things. A while back he did some tests on penetrating oil and I was really surprised how well wd-40 did. I've been a pb blaster guy for a long time but wd beat it almost every time. AvE did an episode on penetrants and had similar results.

Which Penetrating Oil is Best? Lets find out! - YouTube

Sent from my SM-G965U using Tapatalk

Interesting video, always been a fan of kroil. Although if something is frozen solid, usually heat and a quick dab of bees wax does it for me.

Would've rather had the test done with Seafoam deep creep, not Royal Purple. I've never heard of anyone using that stuff.

chevota84 · 07-20-2018, 07:37 PM

Quote:

Originally Posted by JWhite

Interesting video, always been a fan of kroil. Although if something is frozen solid, usually heat and a quick dab of bees wax does it for me.

Would've rather had the test done with Seafoam deep creep, not Royal Purple. I've never heard of anyone using that stuff.

I think he used deep creep in the 2nd video and iirc it worked really well.

Sent from my SM-G965U using Tapatalk

Rig Wrench · 07-21-2018, 08:05 AM

Flatglass love😱

BRE · 07-21-2018, 09:34 AM

Sent from my iPhone using Tapatalk Pro

RockinRam96 · 07-21-2018, 09:58 AM

For those of you with Facebook...

https://www.facebook.com/521487945/p...6037510517946/

Sent from my iPhone using Tapatalk

jfaulkner · 07-21-2018, 11:02 AM

Quote:

Originally Posted by BRE

Sent from my iPhone using Tapatalk Pro

He store his scrap in the shop next to that pile of lift axle?

allan5oh · 07-21-2018, 11:05 AM

Awwww look they're kissing!

BRE · 07-21-2018, 11:15 AM

Quote:

Originally Posted by jfaulkner

He store his scrap in the shop next to that pile of lift axle?

Yea pretty much

Sent from my iPhone using Tapatalk Pro

jfaulkner · 07-21-2018, 12:06 PM

Quote:

Originally Posted by allan5oh

Awwww look they're kissing!

They’re both gay so you don’t have to worry about any inbred Volvo children.

RockinRam96 · 07-21-2018, 02:21 PM

Uh... Rick, you gonna finally make the leap?!

Sent from my iPhone using Tapatalk

jfaulkner · 07-21-2018, 02:53 PM

I kind of want to troll him.

J-Pipes · 07-21-2018, 02:57 PM

Quote:

Originally Posted by jfaulkner

I kind of want to troll him.

Just post it for our entertainment!

Sent from my SAMSUNG-SM-G930A using Tapatalk

Rig Wrench · 07-21-2018, 03:51 PM

Quote:

Originally Posted by jfaulkner

I kind of want to troll him.

Buy it. Your fleet could use some Class

BRE · 07-21-2018, 06:40 PM

That ad is so full of ****... what’s bad is I’ve got people from all over contacting me, wanting to know what kinda truck it is. I don’t want in the middle of it.

I still haven’t gotten my last paycheck either.

Sent from my iPhone using Tapatalk Pro

jfaulkner · 07-21-2018, 09:54 PM

Quote:

Originally Posted by BRE

That ad is so full of ****... what’s bad is I’ve got people from all over contacting me, wanting to know what kinda truck it is. I don’t want in the middle of it.

I still haven’t gotten my last paycheck either.

Sent from my iPhone using Tapatalk Pro

It’s a 379 with a 6NZ. It’s basically the holy grail on the Internet. Be worth 1/2 that if it had like a 2WS lol

SmokinCAT · 07-21-2018, 10:05 PM

Shiny parts.

RockinRam96 · 07-22-2018, 07:21 AM

Quote:

Originally Posted by SmokinCAT

Shiny parts.

These for the K100?!

Sent from my iPhone using Tapatalk

07-20-2018, 11:00 AM	#17981
zfaylor Name: zfaylor Title: Comp Diesel Sponsor Status: Not Here Join Date: Nov 2010 Location: P-TOWN!, Indiana Member`s Gallery Posts: 5,024	We literally threw our induction heater in the garbage. We had it replaced 2 times. It took an eternity to use. Had a guy interested in purchasing it. Went to show him that it worked, it didnt. We really really like Kimball Midwest penetrating oil. Their CB+ is the best but it is honestly a bit too dangerous. It will strip paint instantly and is pretty hard on cuts and eyes. Their regular CB is still dammmmmnnnn good. Our favorite way is to heat the stud and not the nut. It sounds crazy but it works like a dream. We remove 50+ crusty rusty studs and bolts daily. Heat the bolt or the stud until red and keep the flame away to keep it red for a bit without melting it. Let it cool completely down and 9/10 times we barely have to put any effort in to loosen it. If they are severely stuck we get it all red hot and shove parafin wax into the joint. __________________ 2015 half ton heavy chevy 81 Fairmont LS project Many yard ornament projects... North American Turbo

07-20-2018, 12:39 PM	#17982
chevota84 Name: chevota84 Title: Too Much Time Status: Not Here Join Date: Jul 2009 Location: Prineville, OR Member`s Gallery Posts: 4,926	Theres a guy on YouTube called projectfarm, he tests all kinds of things. A while back he did some tests on penetrating oil and I was really surprised how well wd-40 did. I've been a pb blaster guy for a long time but wd beat it almost every time. AvE did an episode on penetrants and had similar results. Which Penetrating Oil is Best? Lets find out! - YouTube Sent from my SM-G965U using Tapatalk __________________ 99 Dodge 2500 with stuff Last edited by chevota84; 07-20-2018 at 12:40 PM.

07-21-2018, 09:58 AM	#17988
RockinRam96 Name: RockinRam96 Title: Too Much Time Status: Not Here Join Date: Sep 2011 Location: Shortsville, NY Member`s Gallery Posts: 2,700	For those of you with Facebook... https://www.facebook.com/521487945/p...6037510517946/ Sent from my iPhone using Tapatalk __________________ 05 Jeep Liberty CRD 11 Dodge 1986 Freightliner Cat 425

07-21-2018, 11:05 AM	#17990
allan5oh Name: allan5oh Title: Too Much Time Status: Not Here Join Date: Oct 2012 Member`s Gallery Posts: 1,106	Awwww look they're kissing! __________________ All of your BSFCs are belong to me

07-21-2018, 02:21 PM	#17993
RockinRam96 Name: RockinRam96 Title: Too Much Time Status: Not Here Join Date: Sep 2011 Location: Shortsville, NY Member`s Gallery Posts: 2,700	Uh... Rick, you gonna finally make the leap?! Sent from my iPhone using Tapatalk __________________ 05 Jeep Liberty CRD 11 Dodge 1986 Freightliner Cat 425

07-20-2018, 04:18 PM	#17983
i-r-truckdriver Name: i-r-truckdriver Title: Think less. Stupid more Status: Not Here Join Date: Jul 2018 Location: Wi Member`s Gallery Posts: 181	This is perfect timing. Just ordered the studs and hardware for our bxs. Have exhaust tick and found one stud is broke. Not exactly looking forward to that job.