3306 Specs?

02_24v2wd

02_24v2wd

That Guy!!
Can any one provide me with a full spec sheet on the 3306 cat? Possibly also valve adjustment procedures. :poke:
 
Do be honest with ya, he's really in need of the valve adjustment info. My buddy at work just bought an 89' 973 and just really wanted to know everything about the engine he could.
 
intake is 0.015" exhaust is 0.025" and on the right side of the block in the flywheel housing there is a place for a barring tool and a timing pin. the pin positions the engine in either tdc #1 or #6. if its positioned on #1 tdc then you adjust intake #1,2,4 exhaust #1,3,5 then barr the engine over and do the rest of the valves. torque the lock nut for the adjusting screw to 22 ftlbs + or - 5 ftlbs
 
Sandman9 said:
intake is 0.015" exhaust is 0.025" and on the right side of the block in the flywheel housing there is a place for a barring tool and a timing pin. the pin positions the engine in either tdc #1 or #6. if its positioned on #1 tdc then you adjust intake #1,2,4 exhaust #1,3,5 then barr the engine over and do the rest of the valves. torque the lock nut for the adjusting screw to 22 ftlbs + or - 5 ftlbs
Click to expand...

Intake is .015 and exhaust is .030
 
You must log in or register to reply here.
Back
Top