Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
11-29-2017, 08:05 PM
|
#1
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
Which pin for manual overdrive switch 98' 12 valve with 3 plugs on the firewall
3 plugs for the pcm I mean. He has a lockup switch tapped at b11, I looked in my atsg book and tapped into b21 without any luck. I guess I can split the loom open at the Transmision connection but I was trying to keep the wiring up top.
The truck doesn't have overdrive, it has new od switch that lights up the dash but overdrive won't happen. I'm going to try a manual switch again before I drop the pan. I don't think it's worth hooking a gauge up if it doesn't even try to shift into od. It starts off in 2nd gear also sometimes. When I drop the pan I'm going to change out the gov pressure solenoid and transducer, band adjustment, filter, and try to jumper the solenoids.
__________________
stock 94
|
|
|
11-29-2017, 09:04 PM
|
#2
|
Name: DieselAdict
Title: If I Had The $ I Would...
Status: Not Here
Join Date: Apr 2015
Location: Greenfield, Indiana
Member`s Gallery
Posts: 31
|
The connection should be the b21 a orange and black wire. Have you hooked a volt meter to verify that the pcm is commanding overdrive
Sent from my iPhone using Tapatalk
__________________
96 Dodge 2500, 66/71/16 S300 w/HTT gated housing, 4k's, 24* Timing, 191dv's, 5x18 IIR4 Injectors, 125lb Vsprings, Fass125, Built Auto(Built by Me) w/ Goerend Constant Pressure VB
2015 VW Jetta TDI 2.0L (Best Mileage as of yet 58MPG)
|
|
|
11-29-2017, 09:10 PM
|
#3
|
Name: DieselAdict
Title: If I Had The $ I Would...
Status: Not Here
Join Date: Apr 2015
Location: Greenfield, Indiana
Member`s Gallery
Posts: 31
|
One would check it at the pcm and trans just to make sure the wire isn’t broken etc. In my times with trans problems I have had the same issue one ended up being the solenoid. Then another the od was fried because of a bad seal.
Sent from my iPhone using Tapatalk
__________________
96 Dodge 2500, 66/71/16 S300 w/HTT gated housing, 4k's, 24* Timing, 191dv's, 5x18 IIR4 Injectors, 125lb Vsprings, Fass125, Built Auto(Built by Me) w/ Goerend Constant Pressure VB
2015 VW Jetta TDI 2.0L (Best Mileage as of yet 58MPG)
|
|
|
11-29-2017, 11:27 PM
|
#4
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
It was a brown wire so maybe we tapped the wrong one. I'll have his truck for a longer amount of time next time it's at my place.
How are you liking those 5x.018s ? The k31 cleans my 16s up pretty fast I may need to go bigger.
__________________
stock 94
|
|
|
11-30-2017, 05:23 AM
|
#5
|
Name: DieselAdict
Title: If I Had The $ I Would...
Status: Not Here
Join Date: Apr 2015
Location: Greenfield, Indiana
Member`s Gallery
Posts: 31
|
Sorry misread something... it is the brown wire...
Sent from my iPhone using Tapatalk
__________________
96 Dodge 2500, 66/71/16 S300 w/HTT gated housing, 4k's, 24* Timing, 191dv's, 5x18 IIR4 Injectors, 125lb Vsprings, Fass125, Built Auto(Built by Me) w/ Goerend Constant Pressure VB
2015 VW Jetta TDI 2.0L (Best Mileage as of yet 58MPG)
|
|
|
11-30-2017, 10:29 AM
|
#6
|
Name: SCHMITTY
Title: Not enough time
Status: Not Here
Join Date: Jun 2012
Location: K beach, AK
Member`s Gallery
Posts: 1,183
|
When he brought the truck over I tapped the wire at the pcm and he wired in the new toggle for od next to his lockup switch. We went for a ride and neither worked !
^^^ that was monday. I should probably go over all the wiring for the kid.
__________________
stock 94
|
|
|
11-30-2017, 12:59 PM
|
#7
|
Name: DieselAdict
Title: If I Had The $ I Would...
Status: Not Here
Join Date: Apr 2015
Location: Greenfield, Indiana
Member`s Gallery
Posts: 31
|
To answer your question about the 5x18s. Love them... they do get hot but the spool characteristics are great... making 54psi no smoke on he top and very streetable. But unlike Greg’s truck it does smoke.
Sent from my iPhone using Tapatalk
__________________
96 Dodge 2500, 66/71/16 S300 w/HTT gated housing, 4k's, 24* Timing, 191dv's, 5x18 IIR4 Injectors, 125lb Vsprings, Fass125, Built Auto(Built by Me) w/ Goerend Constant Pressure VB
2015 VW Jetta TDI 2.0L (Best Mileage as of yet 58MPG)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 03:18 PM.
|