Triple s300 sxe

kleann

kleann

VP44 pwr
I want to put together somewhat of a budget build. I know it will have a 13mm p-pump, probably 5x20-5x25 injectors, ported 12v head, supporting engine work. I want a pretty quick spooling setup and around 1200 hp. Are there any 12v's out there running smaller triples in this power range reliably?
 
I always thought triple s369s would be an awesome setup. I would run a pretty good size wastegate tho to keep them alive.
 
"triple SXE" and "Budget" do not fit in the same sentence, even with S200's.


Not sure if you would be getting the target HP, but 1 177275 SX3 on the manifold and (2) 177281 SX3's as a first stage will get you close and cost half of what an SXE arrangement would. If anyone reading is too lazy to look at the Airwerks catalog that's a 66/73 .91 manifold charger and 66/73 .88 primaries
 
Last edited:
I have a triple s300 hot pipe I’d sell That’d make a good start to the setup. It was an s363 under (2) s366SX-E’s.
 
I had triple 363sxe on a ported Hamilton stage 2 head with his 207/220 cam. they spooled extremely fast, I just put a new head on (non ported) and it didn't change the spoolup. also they would clean up my 5x22... the 5x28 not so much lol. as for 1200hp my track times fall short but im around 1k...
 
Hurley said:
"triple SXE" and "Budget" do not fit in the same sentence, even with S200's.


Not sure if you would be getting the target HP, but 1 177275 SX3 on the manifold and (2) 177281 SX3's as a first stage will get you close and cost half of what an SXE arrangement would. If anyone reading is too lazy to look at the Airwerks catalog that's a 66/73 .91 manifold charger and 66/73 .88 primaries
Click to expand...
kind of forgotten about the old s300s. Those could be an option as well.
 
T-MAN said:
I had triple 363sxe on a ported Hamilton stage 2 head with his 207/220 cam. they spooled extremely fast, I just put a new head on (non ported) and it didn't change the spoolup. also they would clean up my 5x22... the 5x28 not so much lol. as for 1200hp my track times fall short but im around 1k...
Click to expand...

hmm. very good to hear they spool fast on a 12v. have you run it with the 5x28?. are you running any waste gates?
 
Have a 44mm on the manifold that dumps to the hot pipe. The 5x28 I have run , spools the same but it won’t clean them up...
 
And yes the spool up on T-man's setup leaves me slackjawwed. It's like a phucking on off switch. Pure awesomeness......:rockwoot:
 
You must log in or register to reply here.
Back
Top