Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Dodge Competition and Performance General Dodge Competition and Performance Discussion

Closed Thread
 
Thread Tools
Old 06-01-2010, 09:35 PM   #1
smokeblack13
 
smokeblack13's Avatar

Name: smokeblack13
Title: When in doubt Pin it
Status: Not Here
Join Date: May 2009
Location: Fort Myers FL
Member`s Gallery
Posts: 253
valvebody requirements to run

I have a 96 47re in my commonrail and im down to the wiring. I need to know what the valvebody requires to run. I am using a full manual vb so i dont need to use a pcm. I got a pinout for the pcm plug on the vb and i know i obviously need the lockup and o/d run to switches. According to the pinout i believe i need a 5 volt feed into the number 2 pin and a ground to the number 3 pin. Do i need anything else?
__________________
04.5 qcsb Auto swapped Suncoast 47re Full manual Vb
 
Old 06-03-2010, 12:32 AM   #2
cbtoyz
 
cbtoyz's Avatar

Name: cbtoyz
Title: Vaginatarian
Status: Not Here
Join Date: Apr 2008
Location: Fortuna, Ca
Member`s Gallery
Posts: 1,396
I'll have to look at my wiring diagrams tomorrow when I get home, but I cut the main wiring harness about 6" from the plug to the VB and made my own harness. With a full manual VB, you only need three wires. You need a 12 volt in, and ground out the OD solenoid and the Lock up solenoid with switches of your choice. I think It was pin 6 and 7 for OD and Converter Lockup, and I don't remember at the moment what color wire the 12 volt in is.
__________________
Colin. 2wd 12 valve Pro Street 9.88 @ 140mph sold.

Ponci's Diesel Center
(707) 725-3307

Goerend Transmissions Inc.
(563) 778-2719

Hamilton Cams
(512) 778-9418

Dynomite Diesel Products Inc.
(360) 794-5732





...

Last edited by cbtoyz; 06-03-2010 at 12:35 AM. Reason: can't spell
 
Old 06-03-2010, 09:37 AM   #3
5150ram
 
5150ram's Avatar

Name: 5150ram
Title: the god father
Status: Not Here
Join Date: Nov 2007
Location: Jefferson State (the real nor cal)
Member`s Gallery
Posts: 405
Here is a diagram.
Attached Images
File Type: gif trans plug 47re.gif (8.5 KB, 44 views)
__________________
Nitrous is like a hot girl with an std, you know you want to hit it, but your afraid of the consequences. www.5150ram.com
 
Old 06-03-2010, 10:21 AM   #4
smokeblack13
 
smokeblack13's Avatar

Name: smokeblack13
Title: When in doubt Pin it
Status: Not Here
Join Date: May 2009
Location: Fort Myers FL
Member`s Gallery
Posts: 253
Thanks for the diagram but what i dont understand is why it is saying 5 volt reference where does the 12 volt feed into?
__________________
04.5 qcsb Auto swapped Suncoast 47re Full manual Vb
 
Old 06-04-2010, 12:44 AM   #5
FredS

Name: FredS
Title: 12V's Rule
Status: Not Here
Join Date: Oct 2007
Location: AZ
Member`s Gallery
Posts: 81
Trans Relay Output or Pin #1 is your 12V feed for the lockup/od solenoids.
__________________
Fred Swanson
92 W250 stretched 18" with "85Crewcab" 6" lift, 5spd 4x4
SOLD 93 RamCharger 4x4, 97-12V, DDP3s,PS62,DTT 47RH, Alcans
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:01 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com