12v and 24v stock parts - Competition Diesel.Com

Bens · 12-03-2018, 09:32 PM

12v intake plate and horn $25
12v harmonic balancer $50
2 24v 5.9 heads need gone through $200 each
24v gear housing and tin cover $50
12v gear housing and cover $125
P pump gear $100 sell housing and gear for $200
24v rear main seal plate $20
12v stock cam $25

All prices are plus shipping. And obo.

Thanks,
Ben

Sent from my SM-G892A using Tapatalk

Bens · 12-20-2018, 10:29 PM

Bump closing on my new house in a month, would like to sell some of this stuff so I don't have to move it. Make offers!

Also adding some parts:

96 12v longblock, melted a piston or 2 needs rebuilt. $1,000 $1800 with a good 180 pump

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $300

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $200

Feel free to make offers, can arrange shipping through fastenal if need be.

Thanks!

Sent from my SM-G892A using Tapatalk

Stox5225 · 01-02-2019, 06:34 PM

Do you have the stock air filter box? I’m looking for the filter minder.

Sent from my iPhone using Tapatalk

Muddin_dude06 · 01-02-2019, 10:30 PM

The intake horn and plate from a ppump engine?

Bens · 01-03-2019, 12:21 PM

Yes muddin dude,

I dont have a dodge filter minder, but there may be one on a ford airbox I have.

Sent from my SM-G892A using Tapatalk

Bens · 01-04-2019, 09:09 PM

Updated list and pricing

12v harmonic balancer $40

2 24v 5.9 heads need gone through $175 each

24v gear housing and tin cover $40

12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $100 can send pics

24v rear main seal plate $15

12v stock cam $20

96 12v longblock, melted a piston or 2 needs rebuilt. $800

Good 180 pump $800

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $275

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $175

All prices obo plus shipping.

Getting closer to moving time, make offers!

Thanks,

Ben

Sent from my SM-G892A using Tapatalk

Bens · 01-04-2019, 09:13 PM

Pics of the broken ear on gear housing, 96 core longblock, and the 24v heads.

Sent from my SM-G892A using Tapatalk

Bens · 01-19-2019, 08:12 PM

Bump with price updates!

12v harmonic balancer $30

2 24v 5.9 heads need gone through $150 each

24v gear housing and tin cover $30

12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $80 can send pics

24v rear main seal plate $10

12v stock cam $15

96 12v longblock, melted a piston or 2 needs rebuilt. $750

Good 180 pump $750

12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $250

12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $150

All prices obo plus shipping.

Getting closer to moving time, make offers!

Sent from my SM-G892A using Tapatalk

Chris_pat · 01-27-2019, 04:06 PM

Dm me some pics of the 24 valve timing cover please.

stubz616 · 02-05-2019, 05:52 PM

PM'd you on the pump

kole32 · 02-05-2019, 07:12 PM

Still have the 12v gearcase ? Not letting me send you a pm for some reason

Sent from my iPhone using Tapatalk

turbom700 · 02-06-2019, 10:52 AM

Have the front breather that goes on the timing cover, and fuel filter housing?

12-03-2018, 09:32 PM	#1
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	12v and 24v stock parts 12v intake plate and horn $25 12v harmonic balancer $50 2 24v 5.9 heads need gone through $200 each 24v gear housing and tin cover $50 12v gear housing and cover $125 P pump gear $100 sell housing and gear for $200 24v rear main seal plate $20 12v stock cam $25 All prices are plus shipping. And obo. Thanks, Ben Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

12-20-2018, 10:29 PM	#2
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	Bump closing on my new house in a month, would like to sell some of this stuff so I don't have to move it. Make offers! Also adding some parts: 96 12v longblock, melted a piston or 2 needs rebuilt. $1,000 $1800 with a good 180 pump 12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $300 12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $200 Feel free to make offers, can arrange shipping through fastenal if need be. Thanks! Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

01-02-2019, 06:34 PM	#3
Stox5225 Name: Stox5225 Title: Green Behind the Ears Status: Not Here Join Date: Nov 2016 Location: Lillington, NC Member`s Gallery Posts: 97	Do you have the stock air filter box? I’m looking for the filter minder. Sent from my iPhone using Tapatalk __________________ 1997 Cummins 2500; NV4500HD; SB DD; 315/75R16; 3rd Gen Track Bar; 63/65/14; AFC Live; 7mm DV's; 4 GSK; Mac Rack Plug; Custom Fuel System; 5x.012; Colt Cam Big Stick; 60# Springs; PDD Stage 1 Push Rods; O-Ring Head; Head Studs; Fluidampr; Boost/EGT/FP Gauges

01-02-2019, 10:30 PM	#4
Muddin_dude06 Name: Muddin_dude06 Title: ... Status: Not Here Join Date: Sep 2007 Location: Chandler OK Member`s Gallery Posts: 2,541	The intake horn and plate from a ppump engine? __________________ '96 2500 4x4 5sp. 3” Full Long arm lift w/35's ValAir DD Clutch w/ Input DFI 5x.012’s, O-ringed, 625’s Hamilton 178/208, pushrods, PDD street springs, S362sxe/.7WG ‘12 LML crew cab swb 4x4 RC 3.5” lift with 33’s Anarchy tune 5” exhaust w/ Jones 5050XL

01-03-2019, 12:21 PM	#5
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	Yes muddin dude, I dont have a dodge filter minder, but there may be one on a ford airbox I have. Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

01-04-2019, 09:09 PM	#6
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	Updated list and pricing 12v harmonic balancer $40 2 24v 5.9 heads need gone through $175 each 24v gear housing and tin cover $40 12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $100 can send pics 24v rear main seal plate $15 12v stock cam $20 96 12v longblock, melted a piston or 2 needs rebuilt. $800 Good 180 pump $800 12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $275 12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $175 All prices obo plus shipping. Getting closer to moving time, make offers! Thanks, Ben Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

01-04-2019, 09:13 PM	#7
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	Pics of the broken ear on gear housing, 96 core longblock, and the 24v heads. Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

01-19-2019, 08:12 PM	#8
Bens Name: Bens Title: Green Behind the Ears Status: Not Here Join Date: Aug 2016 Member`s Gallery Posts: 99	Bump with price updates! 12v harmonic balancer $30 2 24v 5.9 heads need gone through $150 each 24v gear housing and tin cover $30 12v p pump gear housing and tin cover(noticed one ear is halfway broken off but I wouldn't hesitate to run it) $80 can send pics 24v rear main seal plate $10 12v stock cam $15 96 12v longblock, melted a piston or 2 needs rebuilt. $750 Good 180 pump $750 12v bare block bored .020 over. Needs to be filled to run or maybe lockstitched in the tappet gallery due to a crack in the coolant jacket. Was a fresh block a few years ago but has collected some surface rust. $250 12v block cylinders are rusty not sure if it will clean up with a .040 overbore or need sleeves. $150 All prices obo plus shipping. Getting closer to moving time, make offers! Sent from my SM-G892A using Tapatalk __________________ 95 F350 7.3 under construction, being built for local pulls 04 F350 weekend cruiser/trailer hauler. Mostly stock.

01-27-2019, 04:06 PM	#9
Chris_pat Name: Chris_pat Title: Built not bought Status: Not Here Join Date: Jun 2014 Location: weatherford, tx Member`s Gallery Posts: 145	Dm me some pics of the 24 valve timing cover please. __________________ 2007 5.9 3500 drw 4x4 larmie Twin s400's, fleece twin cp3's, F1 200%

02-05-2019, 05:52 PM	#10
stubz616 Name: stubz616 Title: Too Much Time Status: Not Here Join Date: Oct 2008 Location: Brewster, MA Member`s Gallery Posts: 1,327	PM'd you on the pump __________________ 95 RCLB Farrell Diesel Stage 5 13mm pump,Hamilton Springs,Retainers,Pushrods,Fluidampr,Steed Speed,S467.7/soon to be S488 atmo,Full Billet Trans,DPC 4 disk TC,BD Pressure Loc,Haley Speed 5x.022s,Diesel Pros Custom Cam,O-Ringed,.010 over HG,A1000,Hellman sump,625 Studs, 30*

02-05-2019, 07:12 PM	#11
kole32 Name: kole32 Title: Too Much Time Status: Not Here Join Date: Oct 2012 Location: Knox, IN Member`s Gallery Posts: 569	Still have the 12v gearcase ? Not letting me send you a pm for some reason Sent from my iPhone using Tapatalk __________________ 1993 w250, 215hp pump benched by Seth. 5ks. Hamilton valve springs, colt 181/218 cam, fire ringed head. Airdog 150 at 45psi torktek ofv 6x16 injectors, timing is roughly 30*. S366 soon to have a s475 with it.

02-06-2019, 10:52 AM	#12
turbom700 Name: turbom700 Title: Too Much Time Status: Not Here Join Date: Jun 2007 Location: minneapolis mn Member`s Gallery Posts: 1,186	Have the front breather that goes on the timing cover, and fuel filter housing? __________________ 2001 Ford F-350 CCSB The usal stuff 1997 s10 2wd 350sbc 4l80e 2000 vw gold tdi 1999 Sportsman DIESEL