p7100 pump gear key dimensions needed - Competition Diesel.Com

OnVacation · 03-29-2012, 07:05 PM

I've gone over to the adjustable pump gear, and like a noob didn't think to torque down the holding bolts before starting her up. I sheared off the smaller key bolt and so had to pull the cover to pull the gear.

Blessing in disguise. when the shop put it together, they didn't fix the KDP, nor did they put a key in the pump gear.

I'd like to finish putting it together tomorrow. But, I'd really like to put a key in the pump gear so the timing only adjusts in the way I want it to.

Does anyone have the dimensions for the key? particularly the pump shaft radius and length? I can measure width and depth, but I can't really get a good reading on the radius and length. I'll be sending the dimensions to my shop tomorrow morning, so some good numbers would be really helpful.

Thanks!

Triple 7 · 03-29-2012, 07:37 PM

Call Kenny's and have them send you one.

OnVacation · 03-29-2012, 07:51 PM

Quote:

Originally Posted by Triple 7

Call Kenny's and have them send you one.

Normally I would, but i've got a flat steel, 2 dollar part holding up my reassembly right now, don't feel like waiting another week if I can do it locally.

cumminsturbo94 · 03-29-2012, 09:11 PM

Go to a hardware store and buy a selection of woodruff keys...

DISTURBED · 03-29-2012, 09:13 PM

Go to the local hard ware store with the gear. Im sure they will have a ton of them just buy a couple different sizes that match the slot on the gear

damn treed

03-29-2012, 07:05 PM	#1
OnVacation Name: OnVacation Title: Too Much Time Status: Not Here Join Date: Apr 2011 Member`s Gallery Posts: 381	p7100 pump gear key dimensions needed I've gone over to the adjustable pump gear, and like a noob didn't think to torque down the holding bolts before starting her up. I sheared off the smaller key bolt and so had to pull the cover to pull the gear. Blessing in disguise. when the shop put it together, they didn't fix the KDP, nor did they put a key in the pump gear. I'd like to finish putting it together tomorrow. But, I'd really like to put a key in the pump gear so the timing only adjusts in the way I want it to. Does anyone have the dimensions for the key? particularly the pump shaft radius and length? I can measure width and depth, but I can't really get a good reading on the radius and length. I'll be sending the dimensions to my shop tomorrow morning, so some good numbers would be really helpful. Thanks! __________________ Stationed in Korea. In between trucks at the moment...

03-29-2012, 09:13 PM	#5
DISTURBED Name: DISTURBED Title: YEA WE RIDE THE SHORT BUS Status: Not Here Join Date: Nov 2007 Location: Winchester, Va Member`s Gallery Posts: 6,417	Go to the local hard ware store with the gear. Im sure they will have a ton of them just buy a couple different sizes that match the slot on the gear damn treed __________________ Thanks, Jeremy 01 CTD Retired sled puller, dedicated "Twin Turbo" tow rig 96 CTD "TOO" Disturbed 3.0 - Built by Disturbed Diesel Performance 96 CTD "The Sickness" 2.6/2.8- Built by Disturbed Diesel Performance

03-29-2012, 07:37 PM	#2
Triple 7 Name: Triple 7 Title: Black Smoke Sickness Status: Not Here Join Date: Mar 2008 Location: Mid Michigan Member`s Gallery Posts: 856	Call Kenny's and have them send you one.

03-29-2012, 09:11 PM	#4
cumminsturbo94 Name: cumminsturbo94 Title: Diesel Enthusiast Status: Not Here Join Date: Jan 2009 Member`s Gallery Posts: 181	Go to a hardware store and buy a selection of woodruff keys...