Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Dodge Products Dodge PARTS ONLY!! |
11-24-2017, 06:37 PM
|
#1
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Tons of 12V Engine parts
I have a lot of 12V Engine Parts for sale. The parts are either from a 98 12V 53 block motor or a 94 Auto Motor. Please PM me with a cell phone number or text me if you want pics and I will text them to you. All prices do not include shipping. Prices are negotiable, especially if you buy multiple items. I accept PayPal (jameshhastings@gmail.com). My wife will package and ship to you. I'm located just outside Portland, OR. 805610-9254
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with clutch $250
-Alternator $25
-Alternator Bracket $25
-Injector hard return line $40
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock Lift pump with fuel heater assembly $50
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Stock 12cm WG housing for Hx-35 with actuator $50
-Turbo drain pipe $40
-Turbo drain bung for block $30
-Turbo oil feed line $20
-Oil filter housing and oil cooler from 53 block $50
-Block heater cord and heater element from 53 block $25
-Chromed stock intake horn $40
-Intake plate and grid heater housing with IAT sensor $40
-AC compressor $40
-AC compressor mount off block with 4x long bolts $30
-Stock Harmonic dampener off 98 12v $50
-Tappet Cover $40
-Full set of used stock tappets (1 needs resurface) $20
-Stock lifters $30
-6xRocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-New full set of hat style valve stem seals in bag $40
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Oil dipstick with no tube $10
-Thermostat housing with lift ring $30
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Crank position sensor and mount $20
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-98 12v Block cut with o-rings (needs machined)
-Stock crank and connecting rods $125
-Enterprise Engine Cam #47 (Recently polished and profiled by Oregon Cam Grinders. See picture for exact profile. It is HIGH lift and made lots o power) $200
-Cam Gear $150
-Cam retainer plate $40
If it's not listed here, I may have…just text or PM.
Thanks,
Jamie
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
11-24-2017, 06:39 PM
|
#2
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
Last edited by jhastings; 11-24-2017 at 06:46 PM.
|
|
|
11-24-2017, 06:41 PM
|
#3
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
Last edited by jhastings; 11-24-2017 at 06:47 PM.
|
|
|
11-24-2017, 06:47 PM
|
#4
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Sent from my iPhone using Tapatalk
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
11-27-2017, 03:42 PM
|
#5
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Here is the updated list:
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with clutch $250
-Alternator $25
-Alternator Bracket $25
-Injector hard return line SOLD
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock Lift pump with fuel heater assembly $50
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Stock 12cm WG housing for Hx-35 with actuator $50
-Turbo drain pipe $40
-Turbo drain bung for block $30
-Turbo oil feed line $20
-Oil filter housing and oil cooler from 53 block $50
-Block heater cord and heater element from 53 block $25
-Chromed stock intake horn $40
-Intake runner plate and grid heater housing with IAT sensor $40 (GRIDS INOP)
-AC compressor $40
-AC compressor mount off block with 4x long bolts $30
-Stock Harmonic dampener off 98 12v $50
-Tappet Cover $40
-Full set of used stock tappets (1 needs resurface) $20
-Stock lifters $30
-6x Rocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-New full set of hat style valve stem seals in bag $40
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Oil dipstick with no tube SOLD
-Thermostat housing with lift ring $30
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Crank position sensor and mount $20 (missing one stud)
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-98 12v Block cut with o-rings (needs machined)
-Stock crank and connecting rods $125
-Enterprise Engine Cam #47 (Recently polished and profiled by Oregon Cam Grinders. See picture for exact profile. It is HIGH lift and made lots o power) $200
-Cam Gear $150
-Cam retainer plate $40
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
11-27-2017, 10:29 PM
|
#6
|
Name: j.fondler
Title: Slow Learner
Status: Not Here
Join Date: Nov 2016
Location: SD/TX
Member`s Gallery
Posts: 560
|
I would like the 12cm housing, the chrome intake horn, fan pulley and hub, and the valve stem seals. Pm me price of all shipped.
__________________
51 F5 - 93 w250 chassis - VE/47rh/np205
67 d100 - 89 d350 srw chassis - VE/a518
93 w250 - VE/47rh/NP205 - BAJA!!!!
12 3500 - studZ, deleteZ, tuneZ
|
|
|
11-28-2017, 03:35 PM
|
#7
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Updated List Current as of 28 Nov 17:
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with clutch $250
-Alternator $25
-Alternator Bracket SOLD
-Injector hard return line SOLD
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock Lift pump with fuel heater assembly $50
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Stock 12cm WG housing for Hx-35 with actuator $50
-Turbo drain pipe $40
-Turbo drain bung for block $30
-Turbo oil feed line $20
-Oil filter housing and oil cooler from 53 block $50
-Block heater cord and heater element from 53 block SOLD
-Chromed stock intake horn $40
-Intake runner plate and grid heater housing with IAT sensor $40 (GRIDS INOP)
-AC compressor $40
-AC compressor mount off block with 4x long bolts SOLD
-Stock Harmonic dampener off 98 12v $50
-Tappet Cover $40
-Full set of used stock tappets (1 needs resurface) $20
-Stock lifters $30
-6x Rocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-New full set of hat style valve stem seals in bag $40
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Oil dipstick with no tube SOLD
-Thermostat housing with lift ring SOLD
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Crank position sensor and mount SOLD (missing one stud)
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-98 12v Block cut with o-rings (needs machined)
-Stock crank and connecting rods $125
-Enterprise Engine Cam #47 (Recently polished and profiled by Oregon Cam Grinders. See picture for exact profile. It is HIGH lift and made lots o power) $200
-Cam Gear $150
-Cam retainer plate $40
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
11-29-2017, 12:57 PM
|
#8
|
Name: WILD_PHIL
Title: Too Much Time
Status: Not Here
Join Date: Nov 2009
Location: Texas
Member`s Gallery
Posts: 560
|
I didn’t see it listed, but I needed the springs from an oil cooler for a VE 12 valve. Any chance you got it?
Sent from my iPhone using Tapatalk Pro
__________________
Gather 2016 6.7 info before my purhase.
|
|
|
11-29-2017, 10:56 PM
|
#9
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Sorry I don't
Sent from my iPhone using Tapatalk
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-06-2017, 02:21 PM
|
#10
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Updated List Current as of 6 Dec 17:
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with clutch $250
-Alternator $25
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock Lift pump with fuel heater assembly $50
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Turbo drain pipe $40
-Turbo drain bung for block $30
-Intake runner plate and grid heater housing with IAT sensor $40 (GRIDS INOP due to broken stud, otherwise all parts there)
-AC compressor $40
-Tappet Cover $40
-12v ull set of used stock tappets (1 needs resurface) $20
-Stock lifters $30
-6x Rocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-Cam Gear $150
-Cam retainer plate $40
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-07-2017, 12:53 PM
|
#11
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Updated List Current as of 7 Dec 17:
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with clutch $250
-Alternator $25
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock fuel heater assembly $30
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with 12cm WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Turbo drain pipe $40
-Turbo drain bung for block $30
-Intake runner plate and grid heater housing with IAT sensor $40 (GRIDS INOP due to broken stud, otherwise all parts there)
-AC compressor $40
-Tappet Cover $40
-12v full set of used stock tappets (1 needs resurface) $20
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-Cam Gear $150
-Cam retainer plate $40
Also found these parts as well:
P7100 pump throttle linkage with TPS $100
Rear lifting ring bracket $20
98 12V coolant temp sensor $10
Stock 98 12v clutch hydraulics (worked well when removed) $20
6x12v injector hold down nuts $40
Stock used tensioner $10
Square style nv4500 shifter with torn boot $10
Rigid fuel feed/return lines (look at picture) $15 each
Rigid AFC to Wastegate line $10
Cold pipe clamp $10
v-Band clamp $20
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-07-2017, 12:54 PM
|
#12
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Sent from my iPhone using Tapatalk
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-07-2017, 12:55 PM
|
#13
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Also, stock breather hose $10
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-07-2017, 06:27 PM
|
#14
|
Name: lilredtruck
Title: Diesel Enthusiast
Status: Not Here
Join Date: Sep 2009
Member`s Gallery
Posts: 157
|
nice, thank you
|
|
|
12-13-2017, 11:41 PM
|
#15
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Bump. Still got lots of parts. Look above at the last few posts for all the parts I still have.
Sent from my iPhone using Tapatalk
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
12-27-2017, 06:59 AM
|
#16
|
Name: texans
Title: Green Behind the Ears
Status: Not Here
Join Date: Aug 2012
Member`s Gallery
Posts: 41
|
I need all the p pump stuff you have. Including the linkage. What about a set of rods
|
|
|
12-30-2017, 09:39 PM
|
#17
|
Name: jhastings
Title: Diesel Enthusiast
Status: Not Here
Join Date: May 2011
Member`s Gallery
Posts: 129
|
Updated as of 30 DEC 17:
All parts removed from either a 98' 12v or 94' 12v
-Timing Cover Housing (KDP jig installed) $125
-Timing housing cover $50
-Fan with fan clutch $250
-Alternator $15 (Needs new charge wire stud)
-P7100 Injection pump gear $100
-P7100 Injection pump to block mount $50
-Stock fuel heater assembly $30
-P7100 hard return line $20
-Canister style fuel filter housing and water in fuel sensor $40
-WH1C turbo with 12cm WG housing $150
-HX-35 w/ 14cm WG housing Banks Big Head actuator $500
-Turbo drain pipe $40
-Intake runner plate and grid heater housing with IAT sensor $40 (GRIDS INOP due to broken stud, otherwise all parts there)
-AC compressor $40
-Tappet Cover $40
-12v full set of used stock tappets (1 needs resurface) $20
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-6x valve covers (1 with oil filler) $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $40
-Oil pan oil pickup rear sump $30
-Fan pulley and fan hub $30
-Rear main seal housing $30
-Stock valve springs $30
-Cam Gear $150
-Cam retainer plate $40
-Rear lifting ring bracket $20
-Stock 98 12v clutch hydraulics (worked well when removed) $20
-6x12v injector hold down nuts $40
-Stock used tensioner $10
-Rigid fuel feed/return lines (look at picture) $15 each
-Rigid AFC to Wastegate line $10
-Cold pipe clamp $10
-v-Band clamp $20
-Oil pump $30
All payments PayPal to jameshhastings@gmail.com
Shipping is mostly through USPS as cheap as possible. Thanks!
__________________
1998 2500 12V SLT QCLB 5-speed 4X4 3.54, LSD F+R, 62/68/12, DDP2, 4"exhaust,841 Pump, 16* timing, #10 full back, 3K GSK, 191's, Oregon Cam, 13 " Con-O 241HD, ARP Studs, 60# over springs, 4" inline pacbrake, 226K.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 12:12 PM.
|